CEOP8079 - Connection Guidelines - Essential Energy

UNCLASSIFIED
OPERATIONAL PROCEDURE – Connection Guidelines for High
Voltage Connections and Embedded Generators
CEOP8079
15 ATTACHMENT A – SUMMARY NER SCHEDULE 5.4
CONNECTION ENQUIRY
Schedule 5.4 – Information to be provided with Preliminary Enquiry
The following items of information are required to be submitted with a preliminary enquiry
for connection or modification of an existing connection:
Type of plant - (eg. gas turbine generating unit; rolling mill, etc.)
Preferred site location - (listing any alternatives in order of preference as well)
Maximum power generation or demand of whole plant – (maximum MW and/or MVA,
or average over 15 minutes or similar)
Expected energy production or consumption (MWh per month)
Plant type and configuration – (for example, the number and type of generating units
or number of separate production lines)
Nature of any disturbing load (size of disturbing component MW/MVAr, duty cycle,
nature of power electronic plant which may produce harmonic distortion)
Technology of proposed generating unit (for example, synchronous generator,
induction generator, photo-voltaic array)
When plant is to be in service - (estimated date for each generating unit)
Name and address of enquirer, and, if relevant, of the party for whom the enquirer is
acting
Other information may be requested by the network service provider, such as amount
and timing of power required during construction or any auxiliary power requirements
23 November 2012 - Issue 7
Approved By: Group Manager Major Customer Engagement
Page 31 of 36
UNCLASSIFIED
UNCONTROLLED COPY IF PRINTED