Favor ins_manual.fh11

Introduction
Thank you for purchasing Fakir Favor
Electronic Setam Generator which has
been designed and manufactured to
give you many years of trouble-free
service.
You may already be familiar with using
a similar product, but do please take
time to read these instructions - they
have been written to ensure you get
the very best from your purchase.
Safety is Important
To ensure your safety and the safety
of others, please ensure you read the
Safety Instructions before you operate
this product. Keep this information in
a safe place for future reference.
Imported Safeguards
When using an electric appliance, basic
precautions should always be followed,
including the following:
To reduce the risk of fire, electric shock,
or injury:
• Check the mains voltage stated on the
rating plate corresponds to the local
electricity supply.
• Unwind and straighten the power cord
and supply cord before use.
• Place the appliance on a firm and
steady surface.
• When placing the iron on its stand,
ensure that the surface on which the
stand is placed is stable.
• Avoid power cord or supply cord
touches the soleplate.
• Insert the anti-cal cartridge before use.
• Keep the anti-cal cartridge and
granules away from children at all time.
• If the power cord or supply cord is
damaged, please apply to the
authorized Fakir Service.
• Wait to the cool down iron.Empty the
water tank after use.
• The plug of the supply cord must be
removed from the socket-outlet before
the water reservoir is filed with water.
• Keep electrical appliances out of reach
from children or infirm persons. Do not
let them use the appliances without
supervision.
• Do not add perfumed, vinegar or other
chemical liquids into the water tank;
they can damage the appliance
seriously.
• The iron is not to be used if it has been
dropped, if there are visible signs of
damage or if it is leaking.
• Do not attempt to open the cabinet or
dismantle any parts from the appliance,
there is no serviceable part inside.
• Do not touch the iron rest during or just
after ironing. It is hot!
• Do not roll the power cord or supply
cord around the iron unit or base
console for storage until it has cooled
down completely.
10