View Technical Data Sheet (PDF) 20-0750 - Cloverdale Paint
View Technical Data Sheet (PDF) 20-0750 - Cloverdale Paint
View Technical Data Sheet (PDF) 20-0750 - Cloverdale Paint
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Product Description<br />
TECHNICAL SPECIFICATIONS DATA SHEET<br />
13163<br />
ProCoat Interior Flat Alkyd Low Odour Calcimine<br />
Re-Coater<br />
A professional interior low odour calcimine re-coater oil base wall finish for re-coating calcimine-painted<br />
surfaces and for use on all interior walls and ceilings including drywall, plaster, masonry, and primed wood.<br />
The rich, flat finish reduces the appearance of physical surface imperfections. Ideally suited for textured<br />
walls and ceilings. The oil base formula provides stain blocking characteristics on ceilings with minor smoke<br />
or water discoloration. Use a stain blocking primer where more severe stain discoloration is present. Ideally<br />
suited for commercial work where formal industry quality approvals are required.<br />
Intended Uses<br />
For use on all interior walls and ceilings including drywall, plaster, masonry, and primed wood. Ideally suited<br />
for re-coating calcimine-painted surfaces and textured walls and ceilings. Use on interior walls and ceilings<br />
in bedrooms hallways and living areas.<br />
Product <strong>Data</strong><br />
Color:<br />
Drying Time: (@<strong>20</strong> o C 50% Relative Humidity)<br />
White and Custom Colours<br />
Tack Free: 3 Hours<br />
Finish: Re-Coat: 12 Hours<br />
Flat<br />
Thinner:<br />
Bases:<br />
78001 Mineral Spirits<br />
White<br />
Flash Point (Tag Closed Cup):<br />
42 o C (107 o F)<br />
Vehicle Type:<br />
Alkyd<br />
Viscosity:<br />
86 - 90 KU<br />
Solids by Volume:<br />
42% V.O.C. (Before Thinning):<br />
430 g/L or 3.58 lbs/gal<br />
Solids by Weight:<br />
72%<br />
Recommended Film Thickness<br />
(Per Coat):<br />
Wet: 3.4 - 4.2 mils (86 - 117 microns)<br />
Dry: 1.4 - 1.7 mils (35 - 43 microns)<br />
V.O.C. (At Maximum Thinning Recommendation):<br />
475 g/L or 3.96 lbs/gal<br />
Theoretical Coverage (Per Coat):<br />
350 - 450 ft2/gal (8.0 - 11.0 m2/L)<br />
13163 Page 1 of 2<br />
<strong>20</strong>-<strong>0750</strong>
Surface Preparation<br />
All surfaces must be clean, dry and free of powdery materials and loose or scaling paint. If mildew is<br />
present, surface must be washed with a chlorine bleach solution (<strong>20</strong>% bleach, 1% liquid detergent in water).<br />
Sand all glossy surfaces after cleaning and remove all dust.<br />
.<br />
Recommended Primer<br />
Drywall<br />
Wood<br />
Masonry<br />
- 057<strong>20</strong> ProCoat or 05250 Hi Hide<br />
Latex Drywall Sealer<br />
- 15130 Stain Blocking Alkyd<br />
Primer<br />
Method<br />
Thinning<br />
- 05740 Block Filler or self-priming Cleanup<br />
- Brush, air or airless spray. Airless<br />
tips: 0.013" - 0.015"<br />
- Not normally required. Up to 10%<br />
with Clova Thinner No.1 (Mineral<br />
Spirits) for spraying<br />
- 78001 Mineral Spirits<br />
Steel<br />
For detailed information please refer to MSDS<br />
Check for recent amendments to this data sheet at www.cloverdalepaint.com<br />
Safety Precautions<br />
- 703 Series EcoLogic Rustex<br />
Primer<br />
Warning<br />
CONTAINS PETROLEUM DISTILLATE. HARMFUL IF SWALLOWED. CAUSES EYE AND SKIN<br />
IRRITATION. VAPOUR HARMFUL. COMBUSTIBLE. KEEP OUT OF REACH OF CHILDREN. Keep away<br />
from heat, sparks, open flame. Do not take internally. Avoid contact with eyes and skin, and breathing of<br />
vapour or spray mist. Wear an air supplied mask when applying in enclosed areas. Wash thoroughly after<br />
handling. CLOSE CONTAINER AFTER EACH USE. USE WITH ADEQUATE VENTILATION.<br />
First Aid<br />
In case of eye contact, flush immediately with plenty of water for at least 15 minutes. Wash contaminated<br />
skin with soap and water. If ingested, call physician or the Poison Control Centre immediately.<br />
Warranty Disclaimer<br />
<strong>Cloverdale</strong> <strong>Paint</strong> manufactures quality products. In the event that this product is defective or in any way<br />
unsuitable for the application for which it is sold, <strong>Cloverdale</strong> <strong>Paint</strong> Inc. will replace the product free of<br />
charge. The warranty provided by this data sheet is the only warranty or guarantee of quality made in<br />
respect of this product by <strong>Cloverdale</strong> <strong>Paint</strong> Inc. By purchasing this product the customer accepts this<br />
warranty in lieu of all others, and waives all claims to any other remedy arising from any warranty or<br />
guarantee of quality, whether such warranty or guarantee of quality was made expressly to the customer or<br />
implied by any applicable law.<br />
6950 King George Blvd., Surrey, BC, V3W 4Z1<br />
Web Site: www.cloverdalepaint.com Email: helpdesk@cloverdalepaint.com<br />
Phone: (604) 596-6261 Fax: (604) 597-2677<br />
<strong>20</strong>-<strong>0750</strong>v3 10/27/11<br />
13163 Page 2 of 2<br />
<strong>20</strong>-<strong>0750</strong>