ProCoat Latex Drywall Primer - Cloverdale Paint
ProCoat Latex Drywall Primer - Cloverdale Paint
ProCoat Latex Drywall Primer - Cloverdale Paint
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
COMPLIANCE INDICATORS<br />
At October 27, 2011<br />
<strong>ProCoat</strong> <strong>Latex</strong> <strong>Drywall</strong> <strong>Primer</strong><br />
05720<br />
Environment Canada VOC<br />
LEED<br />
✔<br />
✔<br />
TECHNICAL CHARACTERISTICS<br />
Colours<br />
VOC (g/L)*<br />
White (05720) < 100<br />
*Before tinting<br />
Finish<br />
Flat<br />
DESCRIPTION<br />
<strong>ProCoat</strong> <strong>Latex</strong> <strong>Drywall</strong> <strong>Primer</strong> is a professional interior drywall<br />
primer/undercoat for use on new drywall, interior masonry<br />
surfaces, and to prime patching compounds used with wall repairs<br />
prior to repainting. Best suited for use under latex and acrylic<br />
finish coats. Formulated to provide a combination of good hiding<br />
and sanding characteristics at a value price.<br />
RECOMMENDED USES<br />
• For use on new drywall, interior masonry surfaces, and<br />
to prime patching compounds used with wall repairs prior<br />
to repainting. May be used under latex and oil base finish<br />
coats.<br />
FEATURES<br />
• Good hiding and sanding characteristics<br />
• For use under latex and oil base finishesEvens out prosity fro<br />
a topcoat finish free of flashing<br />
• Good balance of price and performance<br />
Solids & Density<br />
Volume: 31%<br />
Weight: 52%<br />
Density: 11.86 lbs per gallon (container extra)<br />
Film Thickness (Per Coat)<br />
Wet: 4.5 - 6.5 mils (120 - 163 microns)<br />
Dry: 1.5 - 2.0 mils (38 - 50 microns)<br />
Coverage (Per Coat):<br />
250 - 330 ft² / gallon (6.1 - 8.0 m²/L)<br />
Viscosity<br />
90 - 95 KU #4 Ford Cup<br />
Application Equipment<br />
Brush: Use a polyester brush<br />
Roller: Use a 3/8” - 3/4” nap synthetic cover<br />
H.V.L.P Spray: 10 psi cap pressure 1.3 tip size<br />
Airless Spray: Pressure 2000 psi, Tip .013” - .015”<br />
Drying Time at 20°C 50% Relative Humidity<br />
Tack Free: 30 minutes<br />
Re-Coat: 3 hours minimum<br />
Thinner<br />
Not normally recommended. 10% clean water for spray<br />
applications.<br />
Clean Up<br />
Warm, soapy water<br />
Storage Temperature<br />
4°C (40°F) - 32°C (90°F)<br />
Keep from freezing<br />
Flash Point<br />
N/A<br />
Shelf Life<br />
2 year maximum - unopened<br />
<strong>Cloverdale</strong> <strong>Paint</strong> Inc. 6950 King George Blvd. Surrey, BC V3W 4Z1 Canada Tel: 604.596.6261 Fax: 604.596.6261<br />
Formulated and Manufactured<br />
in Surrey, British Columbia<br />
www.cloverdalepaint.com<br />
Page 1 of 2<br />
Version: 10/27/2011
<strong>ProCoat</strong> <strong>Latex</strong> <strong>Drywall</strong> <strong>Primer</strong><br />
05720<br />
Formulated and Manufactured<br />
in Surrey, British Columbia<br />
SURFACE PREPARATION<br />
All Surfaces<br />
All surfaces must be clean, dry, free of powdery materials<br />
and loose or scaling paint. <strong>Drywall</strong> joints must be thoroughly<br />
dry and free from sanding dust. A lower porosity "topping mix"<br />
is recommended as the final drywall compound coat for more<br />
uniform sheen. Sand lightly on the board areas to avoid nap<br />
raising. Use only at temperatures above 10°C (50°F).<br />
WARNING! If you scrape, sand or remove old lead paint from any<br />
surface you may release lead dust. LEAD IS TOXIC. EXPOSURE<br />
TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN<br />
DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN<br />
SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH approved<br />
respirator to control lead exposure. Carefully clean up with a<br />
wet mop or HEPAvacuum. For additional information, Canadian<br />
customers contact the Product Safety division of Health Canada<br />
at 1-800-O-CANADA, US customers contact the U.S. EPA/Lead<br />
Information Hotline at 1-800-424-LEAD (5323).<br />
RECOMMENDED TOPCOATS<br />
Pre-<strong>Paint</strong>ed Surfaces<br />
De-gloss by sanding and must be soundly adhering prior to<br />
repainting.<br />
Wood<br />
N/A<br />
Masonry<br />
Conventional solvent or waterbased architectural paints<br />
<strong>Drywall</strong><br />
Conventional solvent or waterbased architectural paints<br />
Steel<br />
N/A<br />
SAFETY PRECAUTIONS<br />
For detailed information please refer to MSDS<br />
Warning<br />
Keep from freezing. USE WITH ADEQUATE VENTILATION. Close<br />
container after EACH use. Keep out of reach of children.<br />
Do not take internally.<br />
First Aid<br />
In case of eye contact, flush immediately with plenty of water<br />
for at least 15 minutes. Wash contaminated skin with soap and<br />
water. If ingested, call physician or the Poison Control Centre<br />
immediately.<br />
RECENT AMENDMENTS<br />
Check for recent amendments to this data sheet at<br />
www.cloverdalepaint.com<br />
LIMITATION OF LIABILITY<br />
To the best of our knowledge, the technical data contained<br />
herein ar true and accurate at the time of issueance but are<br />
subject to change without prior notice. We guarantee our product<br />
to conform to the specifications contained herein.<br />
WARRANTY DISCLAIMER<br />
<strong>Cloverdale</strong> <strong>Paint</strong> manufactures quality products. In the event<br />
that this product is defective or in any way unsuitable for the<br />
application for which it is sold, <strong>Cloverdale</strong> <strong>Paint</strong> Inc. will replace<br />
the product free of charge. The warranty provided by this data<br />
sheet is the only warranty or guarantee of quality made in<br />
respect of this product by <strong>Cloverdale</strong> <strong>Paint</strong> Inc. By purchasing<br />
this product the customer accepts this warranty in lieu of all<br />
others, and waives all claims to any other remedy arising from<br />
any warranty or guarantee of quality, whether such warranty or<br />
guarantee of quality was made expressly to the customer or<br />
implied by any applicable law.<br />
Read Label and Material Safety Data Sheet Prior to Use. Catalogue: 10-0080<br />
<strong>Cloverdale</strong> <strong>Paint</strong> Inc. 6950 King George Blvd. Surrey, BC V3W 4Z1 Canada Tel: 604.596.6261 Fax: 604.596.6261 www.cloverdalepaint.com<br />
Page 2 of 2<br />
Revision Date: October 27, 2011