Covercoat Exterior Semi Gloss Latex - Cloverdale Paint
Covercoat Exterior Semi Gloss Latex - Cloverdale Paint
Covercoat Exterior Semi Gloss Latex - Cloverdale Paint
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Covercoat</strong> <strong>Exterior</strong> <strong>Semi</strong> <strong>Gloss</strong> <strong>Latex</strong><br />
02123<br />
Formulated and Manufactured<br />
in Surrey, British Columbia<br />
SURFACE PREPARATION<br />
All Surfaces<br />
All surfaces must be clean, dry and free of powdery materials<br />
and loose or scaling paint. If mildew is present, surface should<br />
be washed with a chlorine bleach solution (20% bleach, 1% liquid<br />
detergent in water) see "Special Note". Sand all glossy surfaces<br />
after cleaning and remove all dust. Seal stains with 05130<br />
<strong>Exterior</strong> Acrylic Stain Blocking Primer.<br />
WARNING! If you scrape, sand or remove old lead paint from any<br />
surface you may release lead dust. LEAD IS TOXIC. EXPOSURE<br />
TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN<br />
DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN<br />
SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH approved<br />
respirator to control lead exposure. Carefully clean up with a<br />
wet mop or HEPAvacuum. For additional information, Canadian<br />
customers contact the Product Safety division of Health Canada<br />
at 1-800-O-CANADA, US customers contact the U.S. EPA/Lead<br />
Information Hotline at 1-800-424-LEAD (5323).<br />
RECOMMENDED PRIMER<br />
Pre-<strong>Paint</strong>ed Surfaces<br />
De-gloss by sanding and must be soundly adhering prior to<br />
repainting.<br />
Wood<br />
For new wood use 05130 <strong>Latex</strong> Stain Blocking Primer or 15130<br />
Alkyd Stain Blocking Primer<br />
Masonry<br />
05700 <strong>Latex</strong> Block Filler or Self-priming with 2 coats on masonry<br />
surfaces.<br />
Drywall<br />
05250 Hi-Hide <strong>Latex</strong> Drywall Sealer<br />
Steel<br />
70324 EcoLogic Rustex Primers<br />
SAFETY PRECAUTIONS<br />
For detailed information please refer to MSDS<br />
Warning<br />
Keep from freezing. USE WITH ADEQUATE VENTILATION. Close<br />
container after EACH use. Keep out of reach of children.<br />
Do not take internally.<br />
First Aid<br />
In case of eye contact, flush immediately with plenty of water<br />
for at least 15 minutes. Wash contaminated skin with soap and<br />
water. If ingested, call physician or the Poison Control Centre<br />
immediately.<br />
RECENT AMENDMENTS<br />
Check for recent amendments to this data sheet at<br />
www.cloverdalepaint.com<br />
LIMITATION OF LIABILITY<br />
To the best of our knowledge, the technical data contained<br />
herein are true and accurate at the time of issueance but are<br />
subject to change without prior notice. We guarantee our product<br />
to conform to the specifications contained herein.<br />
WARRANTY DISCLAIMER<br />
<strong>Cloverdale</strong> <strong>Paint</strong> manufactures quality products. In the event<br />
that this product is defective or in any way unsuitable for the<br />
application for which it is sold, <strong>Cloverdale</strong> <strong>Paint</strong> Inc. will replace<br />
the product free of charge. The warranty provided by this data<br />
sheet is the only warranty or guarantee of quality made in<br />
respect of this product by <strong>Cloverdale</strong> <strong>Paint</strong> Inc. By purchasing<br />
this product the customer accepts this warranty in lieu of all<br />
others, and waives all claims to any other remedy arising from<br />
any warranty or guarantee of quality, whether such warranty or<br />
guarantee of quality was made expressly to the customer or<br />
implied by any applicable law.<br />
Read Label and Material Safety Data Sheet Prior to Use. Catalogue: 30-0110<br />
<strong>Cloverdale</strong> <strong>Paint</strong> Inc. 6950 King George Blvd. Surrey, BC V3W 4Z1 Canada Tel: 604.596.6261 Fax: 604.596.6261 www.cloverdalepaint.com<br />
Page 2 of 2<br />
Revision Date: November 10, 2011