Covercoat Exterior Semi Gloss Latex - Cloverdale Paint

COMPLIANCE INDICATORS
At November 10, 2011
MPI 11
Environment Canada VOC ✔
Covercoat Exterior Semi Gloss Latex
02123
TECHNICAL CHARACTERISTICS
Colours
VOC (g/L)*
White Base (02123) < 138
Deep Base (02121) < 150
Clear Base (02124) < 150
*Before tinting
DESCRIPTION
A super premium quality 100% Acrylic Latex exterior finish for use
on stucco, masonry, primed wood, exterior metal and galvanized
surfaces where proper surface preparation and applicable primers
are required. An ideal choice for aluminum and weathered vinyl
siding (dark colours not recommended on vinyl siding as heat
absorption can cause vinyl to ripple). A super premium quality
product with excellent hiding and durability in a rich, semi gloss
finish. Approved by the Master Painter's Institute under Category #
11, Gloss Level 5. This product contains a mildewcide.
RECOMMENDED USES
• For interior or exterior stucco, masonry, primed wood, metal
or weathered vinyl or aluminum siding.
• New colours for vinyl siding must by lighter than original
colour. Apply at temperatures above 5°C (41°F).
FEATURES
• Excellent hiding and durability in a rich, semi-gloss finish.
• A premium quality 100% Acrylic Latex exterior finish for
use on stucco, masonry, primed wood, exterior metal and
galvanized surfaces.
• High dirt repelling properties.
• Contains an Environment Canada approved mildewcide.
Finish
Semi Gloss
Sheen: Gloss Level 5 - MPI Gloss 35 -70 units @ 60°
Solids & Density
Volume: 36%
Weight: 46%
Density: 10.01 lbs per gallon (container extra)
Film Thickness (Per Coat)
Wet: 4.8 - 5.6 mils (105 - 138 microns)
Dry: 1.5 - 2.0 mils (35 - 50 microns)
Coverage (Per Coat):
350 - 450 ft² / gallon (8.0 - 11.0 m²/L)
Viscosity
90 - 95 KU #4 Ford Cup
Application Equipment
Brush: Use a polyester brush
Roller: Use a 10-20 mm nap synthetic cover
H.V.L.P Spray: 10 psi cap pressure 1.3 tip size
Airless Spray: Pressure 2000 psi, Tip .013” - .017”
Drying Time at 20°C 50% Relative Humidity
Tack Free: 45 minutes
Re-Coat: 8 hours
Thinner
Not normally recommended.
Clean Up
Warm, soapy water
Storage Temperature
4°C (40°F) - 32°C (90°F)
Keep from freezing
Flash Point
N/A
Shelf Life
2 year minimum - unopened
Cloverdale Paint Inc. 6950 King George Blvd. Surrey, BC V3W 4Z1 Canada Tel: 604.596.6261 Fax: 604.596.6261
Formulated and Manufactured
in Surrey, British Columbia
www.cloverdalepaint.com
Page 1 of 2
Version: 11/10/2011

Covercoat Exterior Semi Gloss Latex
02123
Formulated and Manufactured
in Surrey, British Columbia
SURFACE PREPARATION
All Surfaces
All surfaces must be clean, dry and free of powdery materials
and loose or scaling paint. If mildew is present, surface should
be washed with a chlorine bleach solution (20% bleach, 1% liquid
detergent in water) see "Special Note". Sand all glossy surfaces
after cleaning and remove all dust. Seal stains with 05130
Exterior Acrylic Stain Blocking Primer.
WARNING! If you scrape, sand or remove old lead paint from any
surface you may release lead dust. LEAD IS TOXIC. EXPOSURE
TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN
DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN
SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH approved
respirator to control lead exposure. Carefully clean up with a
wet mop or HEPAvacuum. For additional information, Canadian
customers contact the Product Safety division of Health Canada
at 1-800-O-CANADA, US customers contact the U.S. EPA/Lead
Information Hotline at 1-800-424-LEAD (5323).
RECOMMENDED PRIMER
Pre-Painted Surfaces
De-gloss by sanding and must be soundly adhering prior to
repainting.
Wood
For new wood use 05130 Latex Stain Blocking Primer or 15130
Alkyd Stain Blocking Primer
Masonry
05700 Latex Block Filler or Self-priming with 2 coats on masonry
surfaces.
Drywall
05250 Hi-Hide Latex Drywall Sealer
Steel
70324 EcoLogic Rustex Primers
SAFETY PRECAUTIONS
For detailed information please refer to MSDS
Warning
Keep from freezing. USE WITH ADEQUATE VENTILATION. Close
container after EACH use. Keep out of reach of children.
Do not take internally.
First Aid
In case of eye contact, flush immediately with plenty of water
for at least 15 minutes. Wash contaminated skin with soap and
water. If ingested, call physician or the Poison Control Centre
immediately.
RECENT AMENDMENTS
Check for recent amendments to this data sheet at
www.cloverdalepaint.com
LIMITATION OF LIABILITY
To the best of our knowledge, the technical data contained
herein are true and accurate at the time of issueance but are
subject to change without prior notice. We guarantee our product
to conform to the specifications contained herein.
WARRANTY DISCLAIMER
Cloverdale Paint manufactures quality products. In the event
that this product is defective or in any way unsuitable for the
application for which it is sold, Cloverdale Paint Inc. will replace
the product free of charge. The warranty provided by this data
sheet is the only warranty or guarantee of quality made in
respect of this product by Cloverdale Paint Inc. By purchasing
this product the customer accepts this warranty in lieu of all
others, and waives all claims to any other remedy arising from
any warranty or guarantee of quality, whether such warranty or
guarantee of quality was made expressly to the customer or
implied by any applicable law.
Read Label and Material Safety Data Sheet Prior to Use. Catalogue: 30-0110
Cloverdale Paint Inc. 6950 King George Blvd. Surrey, BC V3W 4Z1 Canada Tel: 604.596.6261 Fax: 604.596.6261 www.cloverdalepaint.com
Page 2 of 2
Revision Date: November 10, 2011