EcoLogic Waterborne Gloss - Cloverdale Paint
EcoLogic Waterborne Gloss - Cloverdale Paint
EcoLogic Waterborne Gloss - Cloverdale Paint
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Formulated &<br />
Manufactured<br />
in Surrey, BC<br />
COMPLIANCE INDICATORS<br />
At July 18, 2013<br />
MPI 154, 164 & 114, 119<br />
Environment Canada VOC<br />
Meets LEED® Credit 4.2<br />
Canadian Food<br />
Inspection Agency<br />
PAINT & PRIMER<br />
DESCRIPTION<br />
<strong>EcoLogic</strong> ® Ultra Low VOC Interior/Exterior <strong>Waterborne</strong> <strong>Gloss</strong> finish is<br />
one of the finishes in the near zero VOC High Performance coatings<br />
specifically formulated to replace alkyd base products in hospitals,<br />
schools, heavy duty institutional and light industrial areas.<br />
<strong>EcoLogic</strong> ® <strong>Gloss</strong> finish is self-priming on most interior or exterior<br />
surfaces including previously painted surfaces, drywall, concrete<br />
block, masonry, composite siding materials and wood*. <strong>EcoLogic</strong> ®<br />
finishes are formulated for repainting areas that require a tough,<br />
durable, non-yellowing, scrubbable, low odour finish. This product is<br />
lead free and resists mildew, moisture and dirt.<br />
<strong>EcoLogic</strong> ® <strong>Waterborne</strong> <strong>Gloss</strong> coating meets Environment Canada’s<br />
VOC limits for Architectural and Industrial Maintenance Coatings.<br />
Approved by the Master <strong>Paint</strong>ers Institute under category # 114, #<br />
119, # 154, & # 164. <strong>Gloss</strong> level 6.<br />
*See surface preparation.<br />
FEATURES<br />
• Self-priming to most non-porous surfaces<br />
• Formulated for repainting areas that require a tough, durable,<br />
scrubbable finish<br />
• Non-yellowing<br />
• Low odour<br />
• Soap and Water clean-up<br />
• Excellent application properties<br />
• Environmentally friendly - Near zero VOC<br />
• Interior / Exterior performance<br />
✔<br />
✔<br />
d1,d3<br />
RECOMMENDED USES<br />
• Designed to replace and/or repaint surfaces previously painted<br />
with alkyd paints<br />
• Application on interior or exterior walls, woodwork, trim,<br />
moulding, cupboards<br />
• Ideal for applications where extremely low fumes and emissions<br />
are required<br />
I N<br />
O N E<br />
High Performance<br />
Ultra Low VOC Interior/Exterior<br />
<strong>Waterborne</strong> <strong>Gloss</strong><br />
7060 Series<br />
TECHNICAL CHARACTERISTICS<br />
Colours<br />
VOC (g/L)*<br />
White Base (70603) < 2<br />
Deep Base (70601) < 2<br />
Clear Base (70604) < 2<br />
*Before tinting<br />
Finish<br />
<strong>Gloss</strong><br />
Sheen: <strong>Gloss</strong> Level 6. 75 units at 60°<br />
Solids & Density<br />
Volume: 36%<br />
Weight: 48%<br />
Film Thickness (Per Coat)<br />
Wet: 4.2 - 5.6 mils (107 - 143 microns)<br />
Dry: 1.5 - 2.0 mils (38 - 50 microns)<br />
Coverage (Per Coat):<br />
288 - 385 ft² / gallon (7.1 - 9.4 m²/L)<br />
Viscosity<br />
98 - 102 KU<br />
Application Equipment<br />
Brush: Use a polyester brush<br />
Roller: Use a 10 - 20mm nap synthetic cover<br />
H.V.L.P Spray: 10 psi cap pressure. 1.3 tip<br />
Airless Spray: Pressure 2000 psi, Tip .015” - .019”<br />
Drying Time at 20°C 50% Relative Humidity<br />
Tack Free: 30 minutes<br />
Re-Coat: 12 hours<br />
Thinner<br />
Not normally recommended.<br />
Clean Up<br />
Warm, soapy water<br />
Storage Temperature<br />
4°C (40°F) - 32°C (90°F)<br />
Keep from freezing<br />
Flash Point<br />
N/A<br />
Shelf Life<br />
3 year maximum - unopened<br />
<strong>Cloverdale</strong> <strong>Paint</strong> Inc. 6950 King George Blvd. Surrey, BC V3W 4Z1 Canada Tel: 604.596.6261 Fax: 604.596.6261<br />
www.cloverdalepaint.com<br />
Page 1 of 2<br />
Version: 07/18/2013
Ultra Low VOC Interior/Exterior<br />
<strong>Waterborne</strong> <strong>Gloss</strong><br />
7060 Series<br />
Formulated and Manufactured<br />
in Surrey, British Columbia<br />
SURFACE PREPARATION<br />
All Surfaces<br />
Surfaces to be painted must be smooth, clean, dry free of mildew,<br />
grease or soap films, sanding dust or other contaminants that<br />
might interfere with adhesion. If mildew is present, wash with a<br />
chlorine bleach solution consisting of 1 part bleach with 4 parts<br />
water and a squirt of liquid dish detergent. Rinse well. Let dry. Degloss<br />
existing glossy paints and clear coatings by scuff sanding<br />
with medium grit sandpaper. Do not use steel wool with waterbased<br />
coatings. Remove all loosely adhering and flaking paint by<br />
sanding or wire brushing. Ensure that any remaining old paint is<br />
tightly bonding. Patch all holes and imperfections with a suitable<br />
patching, filler or spackling compound. Sand smooth after drying.<br />
Seal all woods such as cedar and redwood that are prone to tannin<br />
staining (extractive bleeding) with 05130 water-based or 15910V<br />
solvent-based stain blocking primers. It is strongly recommended<br />
that when painting over factory-primed mdf or finger-joint millwork<br />
that a field coat of a sealing-type primer such as 05130 or<br />
15910V be applied first to ensure bubble-free consistent results.<br />
Do not apply when air or surface temperature is below 10°C. or<br />
higher than 35°C, or are forecast to do so during the complete<br />
drying period. Keep product from freezing.<br />
WARNING! If you scrape, sand or remove old lead paint from any<br />
surface you may release lead dust. LEAD IS TOXIC. EXPOSURE<br />
TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS<br />
BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT<br />
WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH<br />
approved respirator to control lead exposure. Carefully clean<br />
up with a wet mop or HEPAvacuum. For additional information,<br />
Canadian customers contact the Product Safety division of Health<br />
Canada at 1-800-O-CANADA, US customers contact the U.S. EPA/<br />
Lead Information Hotline at 1-800-424-LEAD (5323).<br />
RECOMMENDED PRIMER<br />
Pre-<strong>Paint</strong>ed Surfaces<br />
De-gloss by sanding and must be soundly adhering prior to<br />
repainting.<br />
SAFETY PRECAUTIONS<br />
For detailed information please refer to MSDS<br />
Warning<br />
Keep from freezing. USE WITH ADEQUATE VENTILATION. Close<br />
container after EACH use. Keep out of reach of children.<br />
Do not take internally.<br />
First Aid<br />
In case of eye contact, flush immediately with plenty of water for at<br />
least 15 minutes. Wash contaminated skin with soap and water. If<br />
ingested, call physician or the Poison Control Centre immediately.<br />
RECENT AMENDMENTS<br />
Check for recent amendments to this data sheet at<br />
www.cloverdalepaint.com<br />
LIMITATION OF LIABILITY<br />
To the best of our knowledge, the technical data contained herein<br />
ar true and accurate at the time of issueance but are subject to<br />
change without prior notice. We guarantee our product to conform<br />
to the specifications contained herein.<br />
WARRANTY DISCLAIMER<br />
<strong>Cloverdale</strong> <strong>Paint</strong> manufactures quality products. In the event that<br />
this product is defective or in any way unsuitable for the application<br />
for which it is sold, <strong>Cloverdale</strong> <strong>Paint</strong> Inc. will replace the product<br />
free of charge. The warranty provided by this data sheet is the only<br />
warranty or guarantee of quality made in respect of this product<br />
by <strong>Cloverdale</strong> <strong>Paint</strong> Inc. By purchasing this product the customer<br />
accepts this warranty in lieu of all others, and waives all claims to<br />
any other remedy arising from any warranty or guarantee of quality,<br />
whether such warranty or guarantee of quality was made expressly<br />
to the customer or implied by any applicable law.<br />
Wood<br />
Self priming or 05130 Interior/Exterior Latex Stain Blocking Primer<br />
or 15910V Exterior Alkyd Stain Blocking Primer<br />
Drywall<br />
Self priming or 05250 Hi-Hide Latex Drywall Sealer<br />
Masonry<br />
Self-priming<br />
Steel<br />
70323 <strong>EcoLogic</strong> Rustex Primer<br />
Non-Ferrous Metals<br />
Self priming or 70323 <strong>EcoLogic</strong> Rustex Primer<br />
Read Label and Material Safety Data Sheet Prior to Use. Catalogue: 20-0030<br />
<strong>Cloverdale</strong> <strong>Paint</strong> Inc. 6950 King George Blvd. Surrey, BC V3W 4Z1 Canada Tel: 604.596.6261 Fax: 604.596.6261 www.cloverdalepaint.com<br />
Page 2 of 2<br />
Revision Date: July 18, 2013
Change language