Airless Paint Sprayer - Harbor Freight Tools
Airless Paint Sprayer - Harbor Freight Tools
Airless Paint Sprayer - Harbor Freight Tools
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
RETURNS NOT ACCEPTED & WARRANTY VOID<br />
if <strong>Sprayer</strong> is not properly cleaned immediately after every use.<br />
Clean <strong>Sprayer</strong> immediately to prevent permanent damage.<br />
<strong>Paint</strong>ing<br />
Before painting, ensure the <strong>Sprayer</strong> has been primed<br />
(see Priming and Startup steps) and verify<br />
that Nozzle Tip is aligned properly.<br />
Note: Remove or cover objects that you want<br />
to protect from overspray and paint mist.<br />
<strong>Paint</strong>ing Techniques<br />
Before painting, ensure the <strong>Sprayer</strong> has been primed<br />
(see Priming and Startup steps) and<br />
verify that Nozzle Tip is aligned properly.<br />
Keep the gun approximately 1 foot from the surface.<br />
1. Once primed, adjust nozzle to Spray setting.<br />
1. Keep gun straight and move arm across at a steady<br />
rate while staying one foot from the surface.<br />
Hi Spray Low Spray Prime/Clean Roll<br />
2. Do not fan the gun or paint will be uneven.<br />
2.<br />
Start spraying at the lowest setting on the Pressure<br />
Control Knob and increase pressure as needed by<br />
turning clockwise to create a good spray pattern.<br />
Overlap<br />
Strokes<br />
3.<br />
Overlap strokes by half, always aim<br />
stroke at bottom edge of last stroke.<br />
Page 14 For technical questions, please call 1-800-444-3353. ITEM 60600
Change language