AH-30 technical specifications, furniture kit and vent system - Amaco
AH-30 technical specifications, furniture kit and vent system - Amaco
AH-30 technical specifications, furniture kit and vent system - Amaco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>AH</strong>-<strong>30</strong>SF CERAMIC KILN SPECIFICATIONS<br />
NEMA Receptacle Plug<br />
15-50<br />
Three Phase<br />
Power Leads Required........... 6 gauge copper wire<br />
Voltage........................................ 240 Volts, Three Phase<br />
Amp Rating............................... 38.6<br />
Kilowatt Rating........................ 16<br />
Power Cord................................ 50 amp with NEMA<br />
15-50 plug<br />
Exterior Dimensions............... 45 1 /2 " W x 38 1 /2 " D x 66 1 /2 " H<br />
Exterior Dimensions<br />
(depth with door open)..... 45 1 /2 " W x 63" D x 66 1 /2 " H<br />
Firing Chamber<br />
Dimensions............................... 20" W x 20" D x 36" H<br />
Firing Chamber Capacity...... 8.33 cubic feet<br />
Firing Speed Control...........SelectFire Computer<br />
Control<br />
Maximum Temperature.....2381 º F, 1<strong>30</strong>5 º C - Cone 10<br />
Elements..................................21 Kanthal High Temp. Coils<br />
Shipping Weight...................1495 lbs.<br />
Kiln should be <strong>vent</strong>ed to the outside using the<br />
AMACO® Master KilnVent <strong>and</strong> up to 60 feet of 4"<br />
diameter duct material—galvanized furnace ducting,<br />
flexible aluminum ducting or PVC (maximum<br />
four 90 º turns).<br />
Kiln must be 18" from any wall. Do not place kiln on<br />
flammable surfaces or near flammable materials.<br />
amaco.com (800) 374-1600 Teacher Support 8am-5pm EST M-F
FK-5 Furniture Kit<br />
for the <strong>AH</strong>-25 And <strong>AH</strong>-<strong>30</strong> KILN<br />
n The <strong>furniture</strong> <strong>kit</strong> listed below consists of shelves <strong>and</strong> shelf supports specifically<br />
designed for the <strong>AH</strong>-25 <strong>and</strong> <strong>AH</strong>-<strong>30</strong>. The kiln shelves are silicon carbide <strong>and</strong> have<br />
a maximum temperature of Cone 13 (2458°F, 1348°C).<br />
n Shelves <strong>and</strong> shelf supports can be custom stacked for each firing to maximize<br />
kiln space.<br />
n Also included is a 4 lb. box of AMACO® Kiln Shelf Wash to make glaze drippings<br />
easy to remove as well as prolonging shelf life.<br />
Quantity<br />
Description<br />
8............................................................. 1" x 1" x 2" shelf supports<br />
8 ............................................................ 1" x 1" x 4" shelf supports<br />
8............................................................. 1" x 1" x 6" shelf supports<br />
8............................................................. 1" x 1" x 8" shelf supports<br />
8............................................................. 19" x 9 ½" x ½" silicon carbide shelves<br />
1............................................................. 4 lb. box of AMACO® Kiln Shelf Wash<br />
amaco.com (800) 374-1600 Teacher Support 8am-5pm EST M-F
MASTER KILNVENT SPECIFICATIONS<br />
Master KilnVent<br />
Expansion Kit<br />
n Using patented Orton Downdraft technology, the Master KilnVent safely pulls<br />
gasses out of the kiln, mixes them with room air, <strong>and</strong> exhausts them to the outside<br />
through 4" ducting. In addition to making the kiln room safer, the Master KilnVent:<br />
n Creates more uniform temperatures throughout the kiln chamber<br />
n Circulates oxygen into the kiln which helps reds, greens, golds, <strong>and</strong> yellows to<br />
be brighter <strong>and</strong> more vibrant<br />
n Optional Expansion Kit allows the Master KilnVent to <strong>vent</strong> two kilns.<br />
Technical <strong>specifications</strong><br />
Electrical......................................................115V, 60Hz, 1.1 amp<br />
CFM...............................................................72<br />
Ducting Requirements...........................Up to 60 feet of 4" duct material—galvanized<br />
furnace ducting, flexible aluminum ducting or<br />
PVC ducting (maximum four 90° turns)<br />
Shipping Weight....................................... 10 lbs.<br />
This KilnVent is designed to work with the following AMACO® kiln models:<br />
<strong>AH</strong>-10, <strong>AH</strong>-25, <strong>AH</strong>-<strong>30</strong>, EC-55, FA-44, FA-88, HF-97, HF-101, <strong>and</strong> HF-105.<br />
amaco.com (800) 374-1600 Teacher Support 8am-5pm EST M-F