BARBER POLE IDENTIFICATION GUIDE

BARBER POLE IDENTIFICATION GUIDE
MARVY 410
Glass Cylinder
Inner Cylinder
4" x 10"
3 1 /4" x 10"
Motor
Motor Mount
Type A
Type A2
MARVY 506
Glass Cylinder
Inner Cylinder
4" x 20"
3 1 /4" x 20"
Motor
Motor Mount
Type A
Type A2
MARVY 405
Glass Cylinder
Inner Cylinder
4" x 16"
3 1 /4" x 16"
Motor
Motor Mount
Type A
Type A2
MARVY 44
Glass Cylinder 6" x 16"
Inner Cylinder Full 5 1 /4" x 16"
(Without metal ends)
Non-revolving
MARVY 33, 333
Glass Cylinder 4" x 16"
Inner Cylinder 3 1 /2" x 16 1 /2"
(Without metal ends)
Non-revolving
55 TWO-LIGHT
MARVY 607
Glass Cylinder
Inner Cylinder
4" x 16"
3 1 /4" x 16"
Motor
Motor Mount
Type A
Type A2
MARVY 55 MARVY 66
Glass Cylinder
Inner Cylinder
6" x 16"
5 1 /4" x 16"
Glass Cylinder
Inner Cylinder
6" x 16"
5 1 /4" x 16"
Motor
Motor Mount
Type A
Type A
Motor
Motor Mount
Type A
Type A
Top Globe 4" x 8" Top Globe 4" x 8"
$9.99 PDFill Form Filler with Free Writer and Tools
Gold
Castings
66 TWO-LIGHT
77 TWO-LIGHT 99 TWO-LIGHT 88 TWO-LIGHT 824 TWO-LIGHT
MARVY 77
Glass Cylinder
Inner Cylinder
6" x 20"
5 1 /4" x 20"
Motor
Motor Mount
Type A
Type A
Top Globe 4" x 8"
MARVY 99
Glass Cylinder
Inner Cylinder
6" x 30"
5" x 29 1 /2"
Motor
Motor Mount
Type A
Type A
Top Globe 4" x 8"
MARVY 88
Glass Cylinder
Inner Cylinder
8" x 20"
6 3 /4" x 20"
Motor
Motor Mount
Type A
Type A
Top Globe 6" x 10"
MARVY 824
Glass Cylinder
Inner Cylinder
8" x 24"
6 3 /4" x 24"
Motor
Motor Mount
Type A
Type A
Top Globe 6" x 10"
NOTES ON MARVY BARBER POLES: Marvy Barber Poles have been manufactured since 1950 • Models 55, 66, 77 and 88 had cast aluminum
mounting brackets until the mid ‘60s when they were built with aluminum channel mounting brackets • Models 33, 333, 405, 506, 607, 44, 99 and 824
were manufactured only with aluminum channel mounting brackets • For more information call: 651-698-0726 or 800-874-2651. Have model and
serial number available, if possible. They can be found on a small metal plate located usually at the bottom of the barber pole mounting bracket.
MARVY Models 410, 405, 333, 55, 77, 88, and 824 are still being produced.

Barber Poles on this page are no longer manufactured. Illustrated for identification only.
PAIDAR 928
PAIDAR 927
PAIDAR 95 / KOCH 195, 8500 PAIDAR 96 / KOCH 196
Glass Cylinder
Inner Cylinder
N/A
4" x 14 1 /2"
Glass Cylinder
Inner Cylinder
6" x 17"
5" x 17"
Glass Cylinder
Inner Cylinder
6" x 17"
5" x 16 1 /2"
Glass Cylinder
Inner Cylinder
6" x 17"
5" x 16 1 /2"
(Without metal ends)
Motor
Type B
Motor
Type B
Motor
Motor
Call for details
Call for details
Motor Mount Type C
Motor Mount
N/A
Motor Mount { Motor Mount {
and clarification.
and clarification.
Top Globe 4" x 8"
Marvy 55 Stainless Dome and Bowl will fit. Top Globe 4" x 8"
Top Globe 4" x 8"
*
Marvy 55 Stainless Dome and Bowl will fit.
*
PAIDAR 374
PAIDAR 98
PAIDAR 99
Glass Cylinder
Inner Cylinder
8" x 22"
6 3 /4" x 22"
Glass Cylinder
Inner Cylinder
8" x 19"
6 3 /4" x 19"
Glass Cylinder
Inner Cylinder
8" x 19"
6 3 /4" x 19"
Motor
Type B Motor
Motor
Call for details
Call for details
Motor Mount Type D Motor Mount { Motor Mount {
and clarification.
and clarification.
Top Globe 4" x 10"
Top Globe 4" x 10"
Marvy 88 Stainless Dome and Bowl will fit.
Marvy 88 Stainless Dome and Bowl will fit.
* *
PAIDAR 373
PAIDAR 591
PAIDAR 595 / KOCH 917
PAIDAR 376
Glass Cylinder
Inner Cylinder
8" x 19"
6 3 /4" x 19"
Glass Cylinder
Inner Cylinder
6" x 17"
5" x 17"
Glass Cylinder
Inner Cylinder
8" x 19"
6 3 /4" x 19"
Glass Cylinder
Inner Cylinder
8" x 22"
6 3 /4" x 22"
Motor
Motor Mount
Type B
Type D
Motor
Motor Mount
Type B
Type C
Motor
Motor Mount
Type B
Type D
Motor
Motor Mount
Type B
Type D
Top Globe 4" x 10"
Top Globe 4" x 10"
$9.99 PDFill Form Filler with Free Writer and Tools

MEASUREMENT OF GLASS CYLINDER
Keep in mind that approximately 1" of the glass cylinder is concealed
within the caulking material ( 1 /2" at the top, 1 /2" at the bottom). If the cylinder
measures 18", assume that the “true length” of the cylinder is 19".
When ordering striped inner cylinder, please note that plastic cylinders have
a tendency to shrink in length. Give us code numbers on lower metal end.
KOCH 21
Glass Cylinder
Inner Cylinder
8" x 22"
6 3 /4" x 22"
Motor
Motor Mount
Type B
Type D
Top Globe 4" x 10"
KOCH 948
Glass Cylinder
Inner Cylinder
6" x 17"
5" x 17"
Motor
Motor Mount
Type B
Type C
Top Globe 4" x 8"
TYPE A
IDENTIFYING YOUR MOTOR
Paidar and Koch poles were
manufactured with either Type A or
Type B motors. (See Illustration)
All Marvy and Koken poles use
Type A motors.
TYPE B
KOCH 968
Glass Cylinder
Inner Cylinder
6" x 17"
5" x 17"
Motor
Motor Mount
Type B
Type C
KOCH 2
Glass Cylinder
Inner Cylinder
8" x 22"
6 3 /4" x 22"
Motor
Motor Mount
Type B
Type D
Top Globe 4" x 10"
$9.99 PDFill Form Filler with Free Writer and Tools
KOCH 909
Glass Cylinder
Inner Cylinder
8" x 19"
6 3 /4" x 19"
Motor
Motor Mount
Type B
Type D
Top Globe 4" x 10"
Paidar
“Little Giant”
(8505)
Koch
“Slim Jim”
PAIDAR 101 / KOCH 201
Glass Cylinder
Inner Cylinder
6" x 30"
5" x 29 1 /2"
Motor
Motor Mount
Type A
Type C
Marvy 55 Stainless Dome and Bowl will fit.
*
KOCH 6
Glass Cylinder
Inner Cylinder
8" x 19"
6 3 /4" x 19"
Motor
Motor Mount
Type B
Type D
Top Globe 4" x 10"
KOCH 18
Glass Cylinder
Inner Cylinder
6" x 17"
5" x 17"
Motor
Motor Mount
Type B
Type C
Top Globe 4" x 8"
KOCH 910
Glass Cylinder
Inner Cylinder
8" x 22"
6 3 /4" x 22"
Motor
Motor Mount
Type B
Type D
Top Globe 4" x 10"
REMEMBER–the more you tell us, the better position we will be in to send the proper replacement parts.

Barber Poles on this page are no longer manufactured. Illustrated for identification only.
KOKEN 95, 328
Glass Cylinder
Inner Cylinder
8" x 24"
6 3 /4" x 24"
Motor
Motor Mount
Type A
N/A
Top Globe 4" x 10"
KOKEN 5162
Glass Cylinder 6" x 16"
Inner Cylinder 5 1 /4" x 16"
Motor
Type A
Motor Mount
N/A
Marvy 55 Stainless Dome and Bowl will fit
*
KOKEN 277, 278
Glass Cylinder
Inner Cylinder
6" x 16"
5 1 /4" x 16"
Motor
Motor Mount
Type A
N/A
The William Marvy Company
maintains an inventory of
replacement parts for
every Marvy Barber Pole
ever made.
Replacement inner
cylinders, glass outer
cylinders and motors are
available for just about
any other barber pole
manufactured since the turn of the
century.
…While the trend these days
KOKEN 5156, 741, 742
Glass Cylinder
Inner Cylinder
6" x 16"
5 1 /4" x 16"
Motor
Motor Mount
Type A
N/A
KOKEN 9, 5150, 5163
Glass Cylinder
Inner Cylinder
8" x 20"
6 3 /4" x 20"
Motor
Motor Mount
Type A
N/A
Top Globe 6" x 10"
has been toward planned obsolescence,
we at the William
Marvy Company are
committed to our product
line and our customer
satisfaction. We are a
family owned and
operated business in our
third generation. Our
service department offers
a complete barber pole restoration
service including re-enameling
porcelain barber poles.
$9.99 PDFill Form Filler with Free Writer and Tools
KOKEN 13, 23, 5151
Glass Cylinder
Inner Cylinder
6" x 16"
5 1 /4" x 16"
Motor
Motor Mount
Type A
N/A
Top Globe 4" x 8"
KOKEN 5164, 5165, 5159
Glass Cylinder
Inner Cylinder
8" x 20"
6 3 /4" x 20"
Motor
Motor Mount
Type A
N/A
KOKEN 93, 10, 11, 5153
Glass Cylinder
Inner Cylinder
8" x 24"
6 3 /4" x 24"
Motor
Motor Mount
Type A
N/A
Top Globe 6" x 10"
5A177690AM5128837
651-698-0726
800-874-2651 (U.S. and Canada)
FAX 651-698-4048
1540 St. Clair Avenue
St.Paul, MN 55105
wmmarvyco.com
KOKEN 118
Glass Cylinder
Inner Cylinder
8" x 24"
6 3 /4" x 24"
Motor
Motor Mount
Type A
N/A
Top Globe 6" x 10"