Footrest - Torq Distribution
Footrest - Torq Distribution
Footrest - Torq Distribution
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
constellation<br />
board footpeg replacement<br />
Add style & comfort in minutes by simply replacing your pegs with these radically designed<br />
Constellation Boards! Mount directly to your standard peg location & gain adjustments in almost any<br />
direction. Choose the correct splined adapter for your desired mounting location & ride on!<br />
• Floorboard measures 10” long by 4-1/2” wide. Extends back 4-3/4” from peg mount.<br />
• Floorboards intended to fold at mounting block, not at standard footpeg mount.<br />
• Both driver & passenger locations allow infinite adjustments within a 2” horizontal section.<br />
Floorboards rotate completely around splined adapter for optimal leg positioning.<br />
• Choose between two positions when installing floorboards in the passenger location; the lower stock<br />
peg position or raised 1-1/8 inches for those shorter-legged riders.<br />
4457 Constellation Board Footpeg Replacement (pr)<br />
Note: Requires Splined Adapter, sold separately.<br />
4358 Constellation Board with Adapter<br />
Fits: Küryakyn Male Mount Cruise Peg Applications<br />
4459 Replacement Rubber Pads for Constellation<br />
Floorboards (set)<br />
$<br />
199.99<br />
$<br />
209.99<br />
$<br />
25.99<br />
Replace Your<br />
Passenger or<br />
Driver Footpegs!<br />
Importance Notice: Adjustable shift & brake linkage is suggested<br />
for driver application. Placing these footboards on mounts intended<br />
for footpegs may prohibit them from folding up in the same manner<br />
as the stock peg. While the board may be rotated on the mount for<br />
a comfortable foot position, some angles may cause the board to<br />
contact other components on the bike before the board is folded up<br />
completely. Also, if the board is positioned so it will fold up as stock,<br />
the trailing end of the board may be in a position that could limit<br />
cornering clearance. Before ordering, be aware of components on the<br />
bike that may interfere with the placement of the floorboards.<br />
1-1/8”<br />
2”<br />
4457<br />
splined adapter mounts<br />
Küryakyn Footpegs & Floorboards for peg mounts are a 2-part system for convenience & easy<br />
installation. Simply select the Floorboards you desire & the appropriate motorcycle specific Splined<br />
Adapters for your bike. These Splined Adapters have teeth that match the footpegs or floorboards &<br />
allows the angle of the footrest to be set & locked in place. This convenient 2-part system also allows<br />
you to change your footrests without purchasing new splined adapters. Have a new bike? Simply switch<br />
your pegs or floorboards by purchasing new Splined Adapters.<br />
Cruiser Model Year Front Rear<br />
Suzuki<br />
Intruder 1500 LC/ ‘98-’09 None 8818<br />
Boulevard C90<br />
Intruder 1400/ ‘95-’08 None 8818<br />
Boulevard S83<br />
Boulevard C50 ‘05-’09 None 8818<br />
Boulevard M50 ‘05-’09 8808 8818<br />
Volusia/Marauder ‘01-’04 None 8818<br />
800<br />
M109R ‘06-‘09 8808 None<br />
M90 '09 8808 8818<br />
C109 '08-'09 None 8818<br />
Victory<br />
Cross Roads All None 8828<br />
Hammer All 8828 8828<br />
Vegas, 8-Ball,<br />
All 8828 8828<br />
Jackpot<br />
Kingpin** All None 8828<br />
* Splined Adapter for driver applications requiring P/N 8816<br />
are intended for floorboard applications only.<br />
**Only if using Accessory Peg Mounts from Victory.<br />
Note: Motorcycle specific adapters only work with stock OEM<br />
peg mounts.<br />
Cruiser Model Year Front Rear<br />
Honda<br />
VTX1800C/F ’02-’08 8815/8816* 8818<br />
VTX1800R/S/N/T ’02-’08 None 8818<br />
VTX1300R/S/T ’03-’09 None 8818<br />
VTX1300C ’03-’09 8815 8818<br />
VT1300 Sabre/<br />
'10 8815 8818<br />
Stateline<br />
VT1300 Interstate '10 None 8818<br />
Fury '09-'10 8815 8818<br />
1100 Spirit /Sabre ’00-’07 8815 8825<br />
750 Shadow<br />
’00-’10 8815 8818<br />
Ace/Aero/Spirit/<br />
Phantom/RS<br />
750 Magna ’96-’04 8815 8818<br />
600 VLX & Deluxe ’96-’07 8815 8818<br />
Valkyrie ’97-’04 None 8825<br />
Rebel 250 '96-'10 None 8818<br />
Triumph<br />
Rocket III All 8813 8808<br />
Can-Am<br />
Spyder (All RS<br />
Models only)<br />
'08-'10 8808 None<br />
Rear Splined Adapters Allow Both Folding<br />
& Rigid Mount In One!<br />
(P/N’s 8818, 8825, 8826, & 8828)<br />
$<br />
21. 99<br />
Sold in Pairs<br />
P/N 8818 priced at $24.99<br />
Cruiser Model Year Front Rear<br />
Yamaha<br />
V Star 1300/T ’07-'10 None 8825<br />
V Star 1100 ‘99-’09 8814 8818<br />
V Star 650 ‘98-’10 8814 8818<br />
V Star 950/T '09-'10 None 8818<br />
Virago 1100 All 8814 8818<br />
Virago 750 All 8814 8818<br />
Roadliner ‘06-’10 None 8825<br />
Stratoliner ‘06-’10 None 8825<br />
Road Star 1600/ ‘99-’10 None 8818<br />
1700 (ex. Warrior)<br />
Road Star Warrior ‘02-’09 8818 8825<br />
Royal Star with ‘96-’01 None 8818<br />
OEM Rear Pegs<br />
Raider ‘08-'10 8818 8825<br />
Kawasaki<br />
Vulcan 1500 A/B ‘87-’99 8813 8826<br />
Vulcan 1500/1600 ‘96-’08 8813 8826<br />
& Mean Streak<br />
Vulcan 800 Classic ‘96-’05 8813 8826<br />
Vulcan 800 Custom ‘95-’05 8813 8826<br />
Vulcan 2000 '04-’10 None 8826<br />
Vulcan 900 Custom ’07-’10 8813 8826<br />
Vulcan 900 Classic ’06-’10 None 8826<br />
Vulcan 1700<br />
Classic<br />
’09-’10 None 8826<br />
W W W . K U R Y A K Y N . C O M<br />
129<br />
F O O T R E S T S
Change language