caution - Toro
caution - Toro
caution - Toro
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Removal (Fig. 8)<br />
1. Park machine on a level surface, lower cutting deck,<br />
stop engine, apply parking brake and remove key from<br />
the ignition switch.<br />
2. Open and support hood.<br />
CAUTION<br />
Do not open radiator cap or drain coolant if the<br />
radiator or engine is hot. Pressurized, hot coolant<br />
can escape and cause burns.<br />
Ethylene -glycol antifreeze is poisonous. Dispose<br />
of coolant properly or store it in a properly<br />
labeled container away from children and pets.<br />
3. Drain radiator into a suitable container using the radiator<br />
drain. The radiator drain hose is located near the<br />
engine oil filter.<br />
4. Disconnect upper and lower radiator hoses from the<br />
radiator.<br />
5. Remove air cleaner hose (item 61).<br />
6. Disconnect reservoir hose from the vent tube near<br />
the radiator cap.<br />
7. Detach upper radiator shroud from the radiator and<br />
lower radiator shroud. Remove upper shroud from machine.<br />
8. Remove fasteners that secure lower radiator shroud<br />
to radiator.<br />
9. Remove six (6) flange head screws and flange nuts<br />
that secure fan motor bracket to radiator.<br />
10.Position lower radiator shroud and fan motor bracket<br />
assembly away from radiator.<br />
11.Remove cap screws and flange nuts securing the radiator<br />
to the support frame. Carefully pull radiator from<br />
the machine.<br />
12.Plug all radiator or hose openings to prevent contamination.<br />
Installation (Fig. 8)<br />
1. Remove all plugs placed during the removal procedure.<br />
2. Carefully position radiator to the support frame. Secure<br />
radiator to the support frame with cap screws and<br />
flange nuts.<br />
3. Position lower radiator shroud and fan motor bracket<br />
assembly to the radiator.<br />
4. Secure fan motor bracket to radiator with six (6)<br />
flange head screws and flange nuts.<br />
5. Position upper radiator shroud to lower radiator<br />
shroud to radiator. Secure shrouds with removed fasteners.<br />
6. Attach radiator shroud assembly to the radiator with<br />
cap screws and flat washers. Make sure that clearance<br />
between shroud and cooling fan is at least 0.180” (4.6<br />
mm) at all points.<br />
7. Connect reservoir hose to the vent tube near the radiator<br />
cap.<br />
8. Connect upper and lower radiator hoses to the radiator.<br />
9. Reinstall air cleaner hose (item 61).<br />
10.Make sure radiator drain is closed. Fill radiator with<br />
coolant.<br />
11.Close and secure hood.<br />
Kubota<br />
Diesel Engine<br />
Groundsmaster 4100--D Page 3 - 11 Kubota Diesel Engine
Change language