caution - Toro

NOTE: Most of the seat suspension components can
be serviced with the seat suspension base mounted to
the frame platform. If the air spring assembly (item 6) requires
removal, the seat suspension base will have to be
removed from the seat platform.
2
1
Disassembly (Fig. 9)
1. Remove operator seat from seat suspension (see
Operator Seat Removal in this section).
2. If the air spring assembly (item 6) or base plate (item
37) requires removal, remove seat suspension from
seat platform (see Operator Seat Removal in this section).
3. Remove seat suspension components as needed
using Figure 9 as a guide.
Assembly (Fig. 9)
3
1. Operator seat
2. Seat switch connector
Figure 10
3. Suspension connector
1. Install all removed seat suspension components using
Figure 9 as a guide.
2. Install seat suspension if it was removed from seat
platform (see Operator Seat Installation in this section):
3. Install operator seat to seat suspension (see Operator
Seat Installation in this section).
4. Make sure that seat electrical connectors are secured
to machine wire harness (Fig. 10).
Chassis
Groundsmaster 4100--D Page 7 - 11 Chassis