caution - Toro

Special Tools
Order special tools from your Toro Distributor. Some
tools may also be available from a local supplier.
Multimeter
The meter can test electrical components and circuits
for current, resistance or voltage.
NOTE: Toro recommends the use of a DIGITAL Volt--
Ohm--Amp multimeter when testing electrical circuits.
The high impedance (internal resistance) of a digital meter
in the voltage mode will make sure that excess current
is not allowed through the meter. This excess
current can cause damage to circuits not designed to
carry it.
Figure 1
Skin -Over Grease
Special non--conductive grease which forms a light protective
skin to help waterproof electrical switches and
contacts.
Toro Part Number: 505 -165
Electrical
System
Figure 2
Deck Proximity Switch Adjustment Tool
The Deck Proximity Switch Adjustment Tool is designed
to assist in the adjustment of the cutting deck position
switches for cutting blade shutdown during deck lift.
Toro Part Number: TOR4095
Figure 3
Groundsmaster 4100--D Page 5 - 3 Electrical System