caution - Toro

Counterbalance Manifold Service
35 to 40 ft -lb
(47to54N-m)
2
4
35 to 40 ft -lb
(47to54N-m)
3
2
35 to 40 ft -lb
(47to54N-m)
5
3
1
UP
FRONT
1. Manifold body
2. Pilot valve
Figure 95
3. Seal kit
4. Relief valve (counterbalance)
5. Seal kit
NOTE: The ports on the manifold are marked for easy
identification of components. Example: C1 is the connection
port from the LH deck lift cylinder and CHG is the
charge circuit connection (See Hydraulic Schematic in
Chapter 9 -- Foldout Drawings to identify the function of
the hydraulic lines and cartridge valves at each port).
Counterbalance Manifold Service (Fig. 95)
For cartridge valve service procedures, see 4WD Manifold
Service in this section. Refer to Figure 95 for counterbalance
manifold cartridge valve installation torque.
Hydraulic System Page 4 - 136
Groundsmaster 4100--D