caution - Toro

Counterbalance Manifold
12
16
15
10
13
9
5
1
14
RIGHT
2
FRONT
10
11 10 8
9
7 6
5
3
4
1. Counterbalance hydraulic manifold
2. Valve plate
3. Flat washer (2 used)
4. Cap screw (2 used)
5. Isolator (4 used)
6. Flat washer (2 used)
Figure 94
7. Lock nut (2 used)
8. Hydraulic fitting (2 used)
9. O -ring
10. O -ring
11. 90 o hydraulic fitting (4 used)
12. Cap screw (2 used)
13. 90 o hydraulic fitting
14. O -ring
15. Test nipple
16. Dust cap
NOTE: The ports on the manifold are marked for easy
identification of components. Example: C1 is the connection
port from the LH deck lift cylinder and CHG is the
charge circuit connection (See Hydraulic Schematic in
Chapter 9 -- Foldout Drawings to identify the function of
the hydraulic lines and cartridge valves at each port).
Hydraulic System Page 4 - 134
Groundsmaster 4100--D