Multi Pro 5700 - Toro

Special Tools
Order these special tools from your Toro Distributor.
Some tools may also be available from a local supplier.
Multimeter
The multimeter can test electrical components and circuits
for current, resistance, or voltage.
NOTE: Toro recommends the use of a DIGITAL Volt--
Ohm--Amp multimeter when testing electrical circuits.
The high impedance (internal resistance) of a digital meter
in the voltage mode will make sure that excess current
is not allowed through the meter. This excess
current can cause damage to circuits not designed to
carry it.
Figure 1
Battery Terminal Protector
Toro Part Number: 107 -0392
Battery Terminal Protector is an aerosol spray that
should be used on battery terminals to reduce corrosion
problems. Apply terminal protector after battery cable
has been secured to battery terminal.
Electrical
System
Figure 2
Battery Hydrometer
Use the Battery Hydrometer when measuring specific
gravity of battery electrolyte. Obtain this tool locally.
Figure 3
Multi Pro 5700--D Page 5 - 3 Rev. C
Electrical System