Multi Pro 5700 - Toro
Multi Pro 5700 - Toro
Multi Pro 5700 - Toro
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Turret Bodies<br />
6<br />
7<br />
3<br />
8<br />
3<br />
4<br />
5<br />
2<br />
9<br />
3<br />
LEFT<br />
BOOM<br />
SUPPLY<br />
CENTER<br />
BOOM<br />
SUPPLY<br />
RIGHT<br />
BOOM<br />
SUPPLY<br />
1<br />
5 4 4<br />
4<br />
5<br />
4<br />
1<br />
4<br />
4<br />
4<br />
5<br />
1. Turret body (w/90 o elbow)<br />
2. 90 o elbow (1 used)<br />
3. Screw<br />
Figure 35<br />
4. Turret body (w/double hose barb)<br />
5. Turret body (w/single hose barb)<br />
6. Single hose barb (3 used)<br />
7. Double hose barb(7 used)<br />
8. Turret body clamp<br />
9. Hose barb (for 90 o elbow)<br />
Removal (Fig. 35)<br />
IMPORTANT: Make sure to remove and neutralize<br />
chemicals from spray components before disassembly.<br />
Wear protective clothing, chemical resistant<br />
gloves, and eye protection during repair.<br />
1. Park machine on a level surface, stop engine, engage<br />
parking brake, and remove key from the ignition<br />
switch.<br />
2. Loosen hose clamps and remove supply hose(s)<br />
from turret body.<br />
Installation (Fig. 35)<br />
NOTE: The type of hose barb on turret body determines<br />
turret location on spray boom. Refer to Figure 35<br />
for turret position on booms.<br />
1. Position turret body clamp halves to spray boom and<br />
turret body. Slide clamp halves together. Position turret<br />
so that spray nozzle and nozzle fan slot are parallel to<br />
ground. Tighten clamp screw to secure turret body.<br />
2. Install supply hose(s) to turret body. Tighten hose<br />
clamp(s).<br />
3. Remove screw that secures turret body clamp to<br />
spray boom. Separate clamp halves and remove turret<br />
body from machine.<br />
Spray System<br />
Page 6 – 36<br />
<strong>Multi</strong> <strong>Pro</strong> <strong>5700</strong>–D
Change language