Golf Irrigation Catalog - Toro
Golf Irrigation Catalog - Toro
Golf Irrigation Catalog - Toro
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
OSMAC ® RDR<br />
Field Satellite<br />
16 to 48 stations in eight-station increments<br />
Run up to 10 stations simultaneously<br />
Hydraulic or electric models<br />
OSMAC ® RDR<br />
Specifications<br />
Electrical<br />
Input power:<br />
• 120/240 V ac, 60 Hz<br />
– 0.17 amps @ 115 V ac, 60 Hz (no load)<br />
– 0.76 amps @ 115 V ac, 60 Hz (maximum load)<br />
– 0.09 amps @ 230 V ac, 50 Hz (no load)<br />
– 0.41 amps @ 230 V ac, 50 Hz (maximum load)<br />
Station output power:<br />
• 24 V ac<br />
• 3.0 amps (72 VA) total<br />
UL and CE approved<br />
Mechanical<br />
Dimensions:<br />
• Large pedestal: 16” W x 45 1 /2 ” H x 16” D<br />
(41cm W x 115,5cm H x 41cm D)<br />
Specifying Information—Pedestal-Mount Satellite, Electric<br />
RDR-XX-P-6A-X-M4<br />
Description Configuration Cabinet Output Communication Surge Protection<br />
RDR XX P 6 X M4<br />
RDR—Field 16—16 Stations<br />
Satellite 24—24 Stations<br />
32—32 Stations<br />
40—40 Stations<br />
48—48 Stations<br />
66<br />
P—Plastic<br />
6A—24 VAC P—Wide Band M4—Full Surge<br />
Electric N—Narrow Band<br />
Example: When ordering a 40-station OSMAC RDR Electric satellite in a plastic cabinet<br />
with narrow-band communication and full surge, you would specify: RDR40P6ANM4<br />
Note: FCC license required.<br />
Specifying Information—Pedestal-Mount Satellite, Hydraulic<br />
RDR-XX-P-01-X-0<br />
Description Configuration Cabinet Output Communication Surge Protection<br />
RDR XX P 01 X 0<br />
RDR—Field 16—16 Stations<br />
Satellite 24—24 Stations<br />
32—32 Stations<br />
40—40 Stations<br />
48—48 Stations<br />
P—Plastic<br />
01—Normally Open<br />
Hydraulic<br />
P—Wide Band 0—No Surge<br />
N—Narrow Band<br />
When specifying a 32-station OSMAC RDR Hydraulic satellite in a plastic cabinet,<br />
normally open hydraulic output with narrow-band communication, you would specify:<br />
RDR32P01N0<br />
Note: FCC license required.<br />
Features<br />
• Modular solid-state design,<br />
expandable up to 48 stations in<br />
eight-station increments, is an<br />
ideal choice for upgrading existing<br />
systems—adding communication<br />
wires or altering hardware is<br />
unnecessary<br />
• Hand-held radio puts satellite<br />
control in the palm of your hand<br />
• Multi-function radio allows control<br />
and voice transmissions from the<br />
same unit<br />
• Runs up to 10 stations<br />
simultaneously (from the central or<br />
by remote control)<br />
• Programmable syringe time from<br />
30 seconds to 128 minutes in<br />
30-second intervals<br />
• Optional relay card available<br />
• Enhanced surge protection<br />
available for electric RDRs<br />
• Hydraulic or electric models<br />
available<br />
• Prewired satellite pedestal models<br />
available without the RDR control<br />
unit for upgrading existing<br />
OSMAC systems<br />
• Smart OSMAC narrow band<br />
upgrade provides the<br />
following capabilities:<br />
• Runs in stand-alone mode:<br />
- Can be used as a backup in<br />
case of central failure or can<br />
run the system prior to<br />
central installation<br />
- Runs off the hand-held radio<br />
- Sequential multi-station<br />
function available<br />
- New command codes added<br />
to the firmware<br />
- Multiple start times per<br />
program<br />
• Multiple stations per program<br />
• Up to 10 programs can<br />
run simultaneously with<br />
one station per program<br />
• Provides ability to download<br />
program from a PDA or laptop<br />
• Utilizes flex Memory for<br />
maximum programming<br />
flexibility<br />
• Create or edit programs<br />
by using a PC or PDA<br />
• Default programs<br />
factory-installed, allowing<br />
immediate operation<br />
• Factory default settings:<br />
- Eight programs<br />
- Eight stations per program<br />
• Smart OSMAC EPROMS now<br />
come factory installed<br />
• Smart OSMAC software<br />
upgrade is required to enable<br />
Smart OSMAC capabilities (see<br />
page 56 for ordering<br />
information)<br />
- Upgrade includes:<br />
• Smart OSMAC software<br />
• Serial cable<br />
• iPAQ