Buyers Guide - The Branford Group

AUCTION CATALOGUE 

MAJOR SALE BY AUCTION 

By Order of Jabil Vienna 

State of the Art CNC Automated 

Rapid Mould CNC Machining Facility 

TO BE SOLD IN LOTS AT: 

Vienna, Austria 

ON: Wednesday 20 th June 2007 

AT: 10.00 am. Prompt 

ON VIEW: Tuesday 19 th June 2007 from 9:00am to 4.00pm 

and from 8.00am on the day of sale. 

In conjunction with Lewis & Clark

CONDITIONS OF SALE 

1. These Conditions together with those set out in the Notice to Purchasers appearing in this catalogue are 

the only terms and conditions subject to which The Branford Group & Hilco Industrial Europe (”the 

Auctioneer”) as agent for the Vendor will sell goods to a purchaser (“the Bidder”) and all other conditions, 

whether express, or implied at common law or by statute as are capable of lawful exclusion are hereby 

excluded. "The auctioneer conducts the public auction according to § 158 Austrian Trade Act 

(Gewerbeordnung) within its legal framework with subject to mobile items, whose purchase is granted by 

law. According to Austrian Law, Bidders under the legal age of 18 are barred from taking part at the 

auction. No bidder will be preferred with respect to other bidders. 

Every assistant involved with the auction comports evenhandedly to all Bidders." 

2. The Auctioneer may at its discretion or upon the instruction of the Vendor: 

(a) Alter or withdraw all or any lots referred to in this auction catalogue up to the moment at which the 

hammer falls in relation to such lot(s). 

(b) Where a reserve has been placed on any lot, withdraw that lot in the event that the highest bid price 

does not meet the reserve. 

(c) Where two or more consecutive lots are similar in quantity and description offer a choice on any 

subsequent lots to the bidder at the same price. 

(d) Bid for any lot or lots offered for sale at the Auction. 

3. Each lot shall be sold to the highest bidder and in the event of any dispute arising between bidders such 

dispute shall be dealt with in such manner as the Auctioneer may in its absolute discretion determine. 

4. Bidding shall be regulated by the Auctioneer in such manner as it may think fit and, without prejudice to 

the generality of the foregoing the Auctioneer may without ascribing any reason therefore, refuse to 

accept any bid or may itself bid for the lot in question on behalf of any third party. 

5. The Bidder will pay to the Auctioneer a premium of 15% on the ”Hammer Price” to which will be added 

Value Added Tax (“VAT”) at the current rate. The premium is not negotiable and is payable by all 

purchasers. The Auctioneer, when acting as agent for the Vendor, may also receive commission from 

the Vendor. 

6. (a) Immediately following the fall of the hammer the Bidder may be required to pay the Auctioneer in 

cash or in whatever form the Auctioneer may agree 25 per cent of the price of each lot which it has 

purchased and will supply the Auctioneer with whatever information the latter may require concerning 

the identity and place of abode/incorporation/centre of main business interest of the Bidder. Deposits 

paid hereunder shall be held by the Auctioneer as general deposit for all lots purchased by the Bidder at 

the sale; 

(b) The balance of purchase monies due will be paid to the Auctioneer on or before the date specified in 

the Notice to Purchasers. 

(c) All lots will be cleared by the Bidder from the premises at which they are sold (subject to the 

conditions set out in Paragraph 7 hereof) not later than the time and date specified in the Notice to 

Purchasers and this condition shall be of the essence of the contract. 

(d) Should the Bidder fail to comply with any of the foregoing requirements the lot or lots which have 

been knocked down to him or any part thereof may be re-offered for sale, destroyed or otherwise 

disposed of by the Auctioneer in any manner as it shall in its absolute discretion deem fit, and any 

deposits paid shall be forfeit; 

(e) Without prejudice to any claims that the Auctioneer and/or the Vendor may have against the Bidder 

for breach of contract or otherwise the Bidder will become liable from the expiration of the time referred 

to in Paragraph 6(c) hereof for all storage, security and administration expenses and the cost of and 

incidental to re-selling and/or otherwise disposing of uncleared items. 

7. (a) The Bidder will only remove lots from the Vendor’s premises by previous arrangement with, and 

subject to the supervision of, the Auctioneer or its appointed representative(s); 

(b) The Bidder will not be permitted to remove any lots it has purchased from the Vendor’s premises 

until all sums due in respect thereof have been paid; 

(c) If, in the Auctioneer’s opinion, removal of any lot or part thereof will be likely to cause serious 

damage to the Vendor’s premises, or any other damage which the Bidder is either unable or unwilling to 

rectify, the Auctioneer may by notice to the Bidder rescind the sale of such lot or permit the removal 

thereof from the premises to proceed subject to such conditions as it may think fit to impose pursuant to 

Paragraph 8 hereof; 

(d) Should any party claim possession of or title to all or part of a lot prior to its removal from the 

Vendor’s premises, the Auctioneer reserves the right to rescind the sale thereof or to permit the removal 

thereof from the Vendor’s premises subject to such conditions as it may see fit to impose. 

- 2 -

8. The Bidder will be responsible for all damage that it, its carriers or its agents may do to the property of 

any third party (and in particular, to the Vendor’s premises) in removing the lot(s) it has purchased. 

Should the Auctioneer consider such damage likely to occur, it may require the Bidder to deposit such 

sum of money with the Auctioneer, by way of security for the costs of reinstating that part of the 

premises likely to be damaged by the removal of a lot, as the Auctioneer may require. Should the 

Bidder refuse to deposit such monies, the Auctioneer may refuse the Bidder access to the Vendor’s 

premises for the purpose of collecting all or any of the lots it has purchased, or rescind the sale of such 

lot pursuant to Clause 7(c) above. 

9. (a) The Bidder is on risk once the hammer falls and is strongly advised to effect insurance at once. 

Upon the fall of the hammer the Bidder shall assume all risks in and relating to such lots. The Bidder is 

advised to effect in respect of all such risks arising thereafter any insurance it may consider necessary. 

The duty of the Auctioneer and/or the Vendor to deliver lots shall be deemed performed upon the fall of 

the hammer even if a lot is subsequently damaged and/or part thereof has been lost. 

(b) Property in each lot shall not pass to the Bidder until (i) full payment therefore has been made or 

(where payment or part payment is made by cheque) until the cheque(s) in question have been cleared 

and (ii) each such lot has been removed from the premises in its entirety. 

10. The Vendor and the Auctioneer shall not be liable in respect of any claim whether in contract or in tort 

(other than claims in respect of injury to persons arising out of the negligence of the Vendor or 

Auctioneer) by the Bidder arising out of or in, any way in connection with the sale or purported sale of all 

or any of the goods for any sum exceeding the amount of the deposit or purchase price (as the case 

may be) paid by the Bidder in respect of the goods which are the subject of the claim. 

11. All goods are sold with all faults and imperfections and errors of description. Illustrations in catalogues 

are for identification only. The Auctioneer has used its reasonable endeavours to ensure that the 

description of each lot(s) appearing in this catalogue is accurate, but the Bidder relies upon such 

description at its own risk. Bidders should satisfy themselves prior to the sale as to the condition of the 

lot and should exercise and rely on their judgment as to whether the lot accords with its description. No 

lots sold in this catalogue are sold as new. Subject to the obligations accepted by the Auctioneer under 

these conditions of sale neither the Vendor, the Auctioneer or its servants or agents is responsible for 

errors of description or for the genuineness or authenticity of any lot and no warranty whatever is given 

by the Auctioneer, its servants or agents or the Vendor to the Bidder in respect of any lot and any 

express or implied conditions or warranties are hereby excluded. 

12. The price at which the Bidder purchases each lot will be exclusive of the premium (payable under 

clause 5) and VAT. Where the Bidder intends any lot to be exported outside AUSTRIA, a refund of VAT 

will (subject to what-ever regulations made from time to time may be in force) be available upon the 

production by the Bidder of such proof of the export as the Auctioneer may require. 

13. The Vendor and the Auctioneer hereby severally exclude liability for any accident or injury, howsoever 

arising, sustained by any person or persons who may attend at the premises for the purpose of the 

auction, inspection, purchase, collection or any other business. 

14. Delivery of lot(s) purchased by the Bidder (which shall be at the sole expense of the Bidder) may not be 

required by him outside normal business hours and is to be made within a reasonable time following 

payment in full. In determining what is a reasonable time just allowance shall be made for all relevant 

contingencies which may arise otherwise than by the negligence of the Vendor or the Auctioneer, and in 

particular, but without prejudice to the generality of the foregoing, for any suspension or failure of 

material services, civil commotion, strike or other industrial action, or other impediment to normal 

delivery outside the control of the Vendor or the Auctioneer. Neither the Vendor nor the Auctioneer shall 

be required to incur any expense towards overcoming such impediment unless indemnified there from 

and put in funds to meet such expense by the Bidder. The Auctioneer shall not be obliged to take any 

legal proceedings for the removal of any such aforesaid impediment to delivery of lot(s) which might in 

its own judgement exacerbate the matter or be detrimental to its own reputation or goodwill. 

15. (a) Depending on the size of the removal programme, it may be that certain projects will come under the 

Health & Safety Executive, set forth in the Austrian Employee Protection Act 

(Arbeitnehmerschutzgesetz) assuming the role of the client under Construction, Design, and 

Management Regulations. This will be where walls, roofs, or major structural movement may take 

place. Any plant movement involving more than a “Lift & Shift” situation needs to be referred to The 

Branford Group/ Hilco Industrial Europe Health & Safety Officer before a “Permit to Work” is issued. 

(b) Clearance of all Lots must be undertaken in accordance with current Health and Safety at Work 

Regulations and, where necessary, Construction, Design, & Management Regulations. You may have 

to provide a “Work Method Statement” and “Risk Assessment” approved by a The Branford Group/ 

- 3 -

Hilco Industrial Europe Health and Safety Officer via the site supervisor, prior to the removal of any 

Lots. The Branford Group/ Hilco Industrial Europe reserve the right to halt clearance if they feel in their 

opinion; it is being carried out in an unsafe manner or without an approved “Method statement” and 

“Risk assessment”, as stated. 

(c) Disconnection/ Oil / Liquid Removal Electrical disconnections from the MAINS supply are the 

responsibility of the purchaser, unless stated otherwise, and MUST be carried out by an Approved 

Electrician. Any fluids remaining in the machine at the time of purchase are the responsibility of the 

purchaser, unless stated otherwise, and MUST be removed from site to conform with the Austrian and 

as well as the EU environmental legislation regulations. 

16. It is expressly brought to the Bidder’s attention that, at the time of sale, any item of plant, machinery or 

equipment contained in the lot(s) may not necessarily comply with the Austrian Health and Safety Laws 

there under governing the use of that plant, machinery or equipment in a working environment. 

Successful Bidders for any such plant, machinery or equipment are hereby required to ensure that the 

use of any such plant and equipment at a place of work within Austria does not contravene such 

relevant laws there under applicable thereto. 

17. It is expressly brought to the Bidder’s attentions that certain types of plant or main service installations 

could contain blue or white asbestos, dangerous chemicals, etc. which if not handled correctly during 

their removal from the site could be in breach of the applicable Austrian Health and Safety Laws or any 

other current legislations covering the use of such substances in a working environment. 

18. The Bidder must comply with all current legislations and regulations in relation to the removal/disposal 

of waste including hazardous waste and may be required to satisfy the Auctioneer in relation to their 

disposal/removal procedures. Where waste materials are removed all work must be undertaken by an 

approved and licensed contractor. 

19. Where the Bidder loads any item of plant, machinery or equipment contained in a lot or lots to remove it 

from the site, the Auctioneer shall be under no liability whatsoever to the Bidder or any third party for 

any damage however so caused by the removal and the Bidder shall be responsible for and indemnify 

the Auctioneer against any damage or loss which the Auctioneer may suffer or incur in respect of loss, 

damage or injury suffered by the Bidder’s employees or any third party arising from the removal of the 

plant, machinery or equipment. The Bidder shall indemnify the Auctioneer against any loss damage 

suffered by the Auctioneer which directly or indirectly is attributable to the nature of the plant, equipment 

or machinery acquired by the Bidder whether through breakage rust decay, desiccation, leakage 

wastage, inherent or latent defect or vice or nature deterioration. 

20. The Bidder acknowledges that any software or intellectual property rights attaching to a lot or lots may 

not be the property of the Vendor or capable of transfer by the Vendor and that neither the Vendor nor 

the Auctioneer is in any way authorising the use by the Bidder of such software or intellectual property 

rights and that according any use of such software or exploitation of such intellectual property rights 

shall be at the Bidder’s sole risk. 

21. These Terms shall be governed by and construed in accordance with the laws of Austria 

(Rechtswahlklausel) and any disputes will be decided only by the Austrian courts 

(Gerichtsstandvereinbarung). 

- 4 -

NOTICE TO PURCHASERS – Wednesday 20 th June 2007 

1. Useful Tel. No’s Auctioneer’s Site Manager: Richard Bradbury, Mob: +44(0)7917361111 

Auction Accounts: Tel. +1 203-488-7020 Fax. +1 203-488-4577 

or contact Mark Wilson at +44(0) 20 76147711 

2. Directions: From the East: 

• Take the motorway A4 at the junction of Wien Prater. 

• Join A23 in the direction of Graz/Linz until the exit 

Favoriten. 

• Follow signs for Wienerberg city and look for the auction sign boards directing 

you to the site 

From the west: 

• Take motorway A1 at junction of Steinhausl. 

• Exit at A23 and follow as above. 

3. Viewing: Tuesday 19 th June 9:00am to 4.00pm and from 

8.00am on the day of sale. 

4. Refreshments Light refreshments will be available at the sale. 

5. Sale Procedure: All Attendees must register giving their full address and telephone number. All 

attendees will be asked for secondary forms of identification i.e. Driver’s 

License, Passport, Bank Reference, etc. Following the completion of 

registration procedures a bid card will be issued under which purchases will be 

made. You are responsible for all bids made under this number. 

IMPORTANT – Once a bid number is issued you will have signed to 

acknowledge the conditions under which your bid is accepted. If in doubt, 

these conditions are available in the catalogue, on the sale site or at any of 

The Branford Group/ Hilco Industrial Europe Offices. 

6. Buyers Premium: The Buyer will pay to the Auctioneer a premium of 15% on the “Hammer 

Price” to which will be added Value Added Tax at the current rate. The 

Premium is not negotiable and is payable by all purchasers. The Auctioneer, 

when acting as Agent for the Seller, may also receive Commission from the 

seller. 

7. Terms: ALL MONIES DUE MUST BE PAID ON OR BEFORE 5:00PM MONDAY 

25TH JUNE 2007 (ON SITE OR THROUGH FRIDAY JUNE 22 AT A 

BRANFORD GROUP/ HILCO INDUSTRIAL EUROPE OFFICE). LOTS MAY 

ONLY BE COLLECTED UPON RECEIPT OF FUNDS: 

Cash, Telegraphic Transfer - lots may only be collected upon receipt of funds: 

Bank details for telegraphic wire transfer: 

Beneficiary Bank Name: Bank of America Domestic Deposits 5687 

Beneficiary Bank Swift Code: BOFAUS6SFCD 

IBAN NUMBER 

GB89BOFA16505095687029 

Beneficiary Name: 

BRANFORD AUCTIONS LLC 

Beneficiary Account Number: 11769018 

Intermediary Bank Name: Bank of America NA London 

Intermediary Bank Swift Code: BOFAGB22 

Intermediary Bank Sort Code: 16-50-50 

Please reference Branford Auctions/Jabil4/Buyer # 

- 5 -

If your bank does not have the ability to include the intermediary bank 

information (it is important to include it if you can – this way may take longer to 

post – please email bank confirmation to kgardner@thebranfordgroup.com ) 

Please wire with these instructions if you can’t use the intermediary: 

Beneficiary Bank Name: 

Bank of America London 

Beneficiary Bank Swift Code: BOFAGB22 

Beneficiary Name: Bank of America Domestic Deposits 5687 

Beneficiary Account Number: GB89BOFA16505095687029 

Ref: For further credit to Branford Auctions LLC a/c 11769018 (Buyer#) 

Bankers Draft, Building Society cheque - lots may be collected upon receipt of 

funds which will be subject to verification. 

Cheques – cheques not accompanied by a letter from your bank stating the 

amount to which your cheque will Not be honoured. Lots will only be released 

upon receipt of cleared funds. 

Credit Cards – Not accepted for payment, for registration purposes only. 

8. Deposits: In accordance with The Auction Conditions of Sale the Auctioneer reserves 

the right to request a deposit to be paid. See Notice No. 21 on Motor 

Vehicles. 

9. Buying Order: For the convenience of buyers who may wish to make purchases, but who do 

not wish to attend the sale, the auctioneer will arrange to bid on their behalf. 

Please complete the form at the rear of this catalogue. The Auctioneer shall 

not be liable for any neglect, default or failure in executing bids. There is a 

minimum bid of €50 per lot and viewing is strongly recommended. 

10. Risk: The Bidder is on risk once the hammer falls and is strongly advised to effect 

insurance at once. 

11. Clearance: All lots to be cleared without fail by Thursday 12 th July 2007. Any lots not 

cleared Thursday 12 th July 2007 will be subject to progress chasing. You 

should ensure that any haulier holds sufficient insurance cover for ‘Public 

Liability and Goods in Transit.’ Copies of the insurance cover should be made 

available to The Branford Group/ Hilco Industrial Europe Site Supervisor 

before removal of goods from site. 

Note certain Lots may be available for clearance during the auction at the 

discretion of the Site Manager upon receipt of funds. 

The premises will be open 8.30am to 4.00pm Monday to Friday only. 

Health & Safety 

Clearance of all Lots must be undertaken in accordance with current Health 

and Safety at Work Regulations and, where necessary, Construction, Design, 

& Management Regulations. You may have to provide a “Work Method 

Statement” and “Risk Assessment” approved by a The Branford Group/ Hilco 

Industrial Europe Health and Safety Officer via the site supervisor, prior to the 

removal of any Lots. The Branford Group/ Hilco Industrial Europe reserve the 

right to halt clearance if they feel in their opinion; it is being carried out in an 

unsafe manner or without an approved “Method statement” and “Risk 

assessment”, as stated. 

Disconnection/ Oil / Liquid Removal 

Electrical disconnections from the MAINS supply are the responsibility of the 

purchaser, unless stated otherwise, and MUST be carried out by an Approved 

Electrician. 

- 6 -

Any fluids remaining in the machine at the time of purchase are the 

responsibility of the purchaser, unless stated otherwise, and MUST be 

removed from site to conform with current Substances Hazardous to Health 

regulations. 

12. Buyers Choice Where similar lots are indicated in the catalogue the Auctioneer may offer 

Buyers Choice. This allows the successful bidder to choose which (or all) lots 

in a given run they would like on a per lot basis taken either in or out of 

sequence. 

13. Transfer of Lots The Auctioneer will only accept payment from and permit removal of lots 

purchased by the Purchaser successfully bidding at the sale or its agent acting 

for the purchaser. 

14. Value Added Tax Purchasers will be charged Value Added Tax at the current rates on the 

amount of their purchases and the buyers premium. 

15. Recording Please note this sale is recorded and we reserve the right to use the 

recordings to assist with resolving disputes or legal issues as appropriate. 

16. Conditions of sale The attention of Purchasers is drawn to the Conditions of Sale included in this 

Catalogue. 

17. Purchase of Goods through a Finance Company 

The Auctioneers draw to the attention of buyers contemplating purchasing 

goods through a finance company that arrangements should be made well in 

advance of the Finance of the sale so they may make payment in accordance 

with the Conditions of Sale. 

18. Indivisible Loads Successful Purchasers must obtain the necessary permission (i.e. Police, 

Ministry of Transport, Local Authority) to transport off site loads (long/wide 

loads) within sufficient time prior to the commencement of clearance of those 

items, in order to comply with the clearance period as stated in the Notice to 

Purchasers. 

19. Overseas 

Purchasers 

Overseas Purchasers must register showing or providing details of: 

1) Their passport(s) or national identity card(s). 

2) One other method confirming their identity, i.e. drivers licence, name, 

address, telephone and fax numbers. 

3) Full details of their National Bank 

4) Details from their bank confirming method of payment etc. 

Please also ensure that: 

5) Your country, or the country to which the items are destined, holds no 

import restrictions on the goods that you wish to purchase. 

6) The country has no import licence restrictions or a restriction on currency 

allocation. 

7) The country has no prolonged inspection procedure which might cause 

excessive delay in allowing your goods to be imported. 

8) You receive a fully-descriptive invoice in order that you may arrange 

payment as soon as possible with our bank. Please forward wire confirmation 

to Kgardner@thebranfordgroup.com 

9) You employ a reputable freight forwarding organisation. Please note that 

many of the machinery removal companies in this country are not necessarily 

freight forwarders. We will be pleased to advise accordingly. 

10) You have read the Conditions of Sale 

- 7 -

20. Please Note: a) We cannot allow removal of any Lot from the Auction Site until our 

Accounts Department has received notification from our bankers a) that your 

payment has been properly cleared in full. Monies must be transferred to 

ourselves within the time stated in the “Notice to a) Purchasers” on the 

preceding page. 

b) If there are any special arrangements that you wish to make with us, you 

must contact us at least three days before the Sale date. 

21. VAT PAYMENT AND RETURNS 

Non EEC Purchasers (Non EU): 

All non EEC Purchasers will be charged 20 % VAT, the current rate on each 

Lot purchased. This will be refunded to you as soon as we receive a copy of 

the bill of lading as proof of export. 

EEC Registered Companies (EU): 

Non Austrian based companies registered in the European Economic 

Community are exempt from VAT, subject to receipt of the following 

information: 

i.. Company name and address. 

ii. Telephone / Fax Number 

iii. Contact Name / Position 

iv. VAT Number 

v. The number allocated to you for intra-EC trade (where applicable) 

vi. A letter of assurance from a freight forwarder confirming that they will 

provide satisfactory documentation proving export. 

The above information must be supplied, we have attached a form to fill out: 

VAT for EU Members: Please email to kgardner@thebranfordgroup.com or 

fax to 203-488-4577 for the attention of Kristin Gardner on your official 

Company notepaper and signed by the contact name quoted. 

FAILURE TO CONFORM TO ALL OF THE ABOVE WILL RESULT IN VAT 

BEING LEVIED AND REFUNDS ONLY BEING MADE UPON RECEIPT OF 

SATISFACTORY EXPORT DOCUMENTATION. 

If you intend to export your purchases using your own transport (either by Sea 

or Air) then VAT will be levied and refunded upon receipt of satisfactory 

documentation. 

The Branford Group/ Hilco Industrial Europe reserve the right to refuse to 

accept the bid of any attendee should they or are they unable to conform 

on any of the above. 

- 8 -

WEBCAST BIDDING 

REGISTRATION 

1. Go to www.TheBranfordGroup.com You will see the Jabil #6 sale listed on the 

home page. 

2. Click the link for Jabil #6 sale and you will be transferred to the Sale Page. 

3. Select the ‘’Register Now’’ option and then complete the registration form. If you 

have never registered with The Branford Group, you will be prompted for a 

Username and Password. If you do not have a Username and Password, you 

must register and create an account on The Branford Group’s web site before you 

can register for the sale. Please ensure that you read and accept the Terms and 

Conditions of sale. You will be prompted for your Credit Card information as there 

is a $20.00 (USD) registration fee. 

4. Upon approval you will receive an email confirming your registration which will 

include your Bidder Number and bidding instructions. Please be sure to review 

the bidding instructions. 

PROXY BIDS/ABSENTEE BIDS 

Once you have registered for the sale and have received a Bidder Number you will have 

the opportunity to place proxy bids. To do this, please follow these instructions: 

1. On the Jabil #6 sale page at www.TheBranfordGroup.com click the link for 

Absentee (Proxy) Bidder Form located under Documents. 

2. Complete the form and fax it to 1-203-488-4577 (please note time difference) or 

email to kgardner@thebranfordgroup.com 

ON THE DAY OF SALE 

1. Review the Bidding Instructions included in the email that was sent to you after 

successful registration. There is a two step process: 

A. Call the conference call where you place your bids 

B. Go to the web site where you can view the live SlideShow. 

2. If you do not have the registration email or did not receive the email, go to 

www.TheBranfordGroup.com and click on My Sales in the top right-hand corner of 

the web site. You may be prompted to login if you are not already. This will take 

you to a page that will list all the sales you are registered for. Locate the Jabil #6 

sale and below the sale you will see a link to View Bidding Instructions. This will 

take you to a page that will include your Bidder Number and the Auction 

Instructions. 

AFTER THE SALE 

You will receive your invoice confirming your purchases by email on the day of the sale. If 

you have not received it, please check your junk email as it may show up as spam. 

IMPORTANT NOTE:- 

The Internet is not foolproof and a number of factors such as the speed of your 

modem, the amount of traffic being carried by your service provider and even the 

integrity of the telephone connection can affect how you are able to view the sale. 

Whilst all efforts have been made to ensure fast data transfer from the site neither 

The Branford Group nor Hilco Industrial Europe can NOT accept responsibility for 

equipment failure or loss of connection from the site which is beyond our control. 

For all other technical enquiries relating to Internet bidding contact: 

The Branford Group Tel +1 203-488-7020 or AJ’s Mobile phone +1 203-815-2547 

Payment Enquiries: Tel +1 203-488-7020 or email 

kgardner@thebranfordgroup.com 

- 9 -

VAT FOR EU MEMBERS 

ZERO-RATING FOR EU VAT REGISTERED BUYERS WHERE LOTS ARE BEING SHIPPED 

OUT OF THE AUSTRIA 

Exemption / Application for Reverse Charge Mechanism 

(CANCELLATION OF VAT CHARGED ON HAMMER PRICE AND BUYERS PEMIUM – LOTS) 

(NOT APPLICABLE TO AUSTRIA VAT REGISTERED PURCHASERS) 

The removal of customs barriers within the European Union has made it difficult for purchasers to 

obtain the necessary evidence required for The Branford Group to process refunds of VAT 

charged on the goods and buyer’s premium. 

In order to improve the service offered to our customers, The Branford Group would be grateful if 

you can complete the following declaration in full. 

The following buyer who purchased lot(s) in the Jabil Vienna Webcast auction is intended to carry 

the goods out of the AU to a destination within the European Union. 

Buyer’s Name: .................................................................................................................……………… 

Address: .................................................................................................................……………… 

.................................................................................................................……………… 

.................................................................................................................……………… 

Buyers’ VAT registration number: ...................................................................................……………… 

Shippers Name:................................................................................................................……………… 

Address: .................................................................................................................……………… 

.................................................................................................................……………… 

.................................................................................................................……………… 

Delivery Address (if different) 

...................................................................................................................…………….. 

...................................................................................................................…………….. 

...................................................................................................................…………….. 

Method of Transport: 

Ferry route and Company: 

....................................................................................................……………. 

Flight from: ............................................……… to: ..................................................…….. 

Carrier: 

............................................……… 

flight no: .................................................……... 

We certify that the above details are an accurate record of our intentions for leaving the AU with 

the purchase. 

I agree to provide The Branford Group with the shipping documents and/or export documents 

proving the purchase was carried out of the AU. 

I will inform The Branford Group of any change to the above arrangements. 

We are aware that The Branford Group are obliged to provide the above information to Austrian 

VAT Authorities at their request. 

Signed: 

..............................................................................................................…………… 

Name in Capitals: ..............................................................................................................…………… 

Position in business: ...............................................................…………… 

Date:.................................... 

Please fax to +1 203-488-4577 or email to Kgardner@TheBranfordGroup.com 

- 10 -

SPECIAL NOTICE TO PURCHASERS 

1. CHILDREN UNDER THE AGE OF 16 OR PETS WILL NOT BE 

ADMITTED TO SITE AT ANY TIME. 

CATALOGUE 

This catalogue is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, 

authenticity, description, weight, count or measure of any of the lots specified herein. 

1 Tesa 0.001mm Dial Gauge, Tesa 0.002mm Dial Gauge, Fisso Magnetic Gauge Stand 










11 Tesa 0.001mm Dial Gauge, Tesa 0.002mm Dial Gauge, Magnetic Gauge Stand 




15 0.001mm Dial Gauge, 0.002mm Dial Gauge, Magnetic Gauge Stand 

16 0.001mm Dial Gauge, 0.002mm Dial Gauge, Magnetic Gauge Stand 

17 0.002mm Dial Gauge, two Magnetic Gauge Stands 

18 Tesa Digico 10 Digital Comparator With Depth Gauging Adaptor 

19 Two Tesa Digico 10 Digital Comparators With Depth Gauging Adaptor 

20 Tesa Tesamaster 0-25mm x 0.001mm Outside Micrometer 







27 Four Tesa Tesamaster 0-25mm x 0.001mm Outside Micrometers 





32 Three Mitutoyo 0-25mm x 0.01mm Outside Micrometers 

(Two Micrometers) - Tesa Tesamaster 50-75mm x 0.001mm Outside Micrometer, Tesa Tesamaster 0-25mm 

33 x 0.001mm Outside Micrometer 

(Three Micrometers) - Tesa Tesamaster 50-75mm x 0.001mm Outside Micrometer, Tesa Tesamaster 25- 

34 50mm x 0.001mm Outside Micrometer Tesa Tesamaster 0-25mm x 0.001mm Outside Micrometer 

- 11 -

(Four Micrometers) - Tesa Tesamaster 75-100mmmm x 0.001mm Outside MicrometerTesa Tesamaster 50- 

75mm x 0.001mm Outside Micrometer, Tesa Tesamaster 25-50mm x 0.001mm Outside Micrometer Tesa 

35 Tesamaster 0-25mm x 0.001mm Outside Micrometer 

(Four Micrometers) - Tesa Tesamaster 75-100mmmm x 0.001mm Outside MicrometerTesa Tesamaster 50- 

75mm x 0.001mm Outside Micrometer, Tesa Tesamaster 25-50mm x 0.001mm Outside Micrometer Tesa 

36 Tesamaster 0-25mm x 0.001mm Outside Micrometer 

37 HHW DIGI-MET 600mm x 0.01mm Digital Caliper Gauge 

















54 Tesa 300mm x 0.02mm Caliper Dial Gauge 

55 Hahn & Kolb 1mm x 0.001mm Dial Gauge 

56 Four Magnetic gauge stands 









65 Four Tesa 100mm x 0.02mm Caliper Dial Gauges 






71 Tesa 0-100mm Depth micrometer 

72 Tesa 0-100mm Depth micrometer 

73 HHW Bevel Protractor 

74 Two Hommel Vernier Depth Gauges, 0-100mm x 0.05, 0-150mm x 0.05 

75 Two Engineers Square & Flatness Gauge Sets 








- 12 -


84 Two Various Engineers Square & Flatness Gauges 

85 Ten 1000 W x 400mmD x 1500mm H Bays of Adjustable Steel Shelved Storage Racks 

86 Two Lista 700mm W x 700mm D x 1100mm H Heavy Duty Multi-Drawer Tool Cabinets with 1440mm Worktop 

87 Three Lista 700mm W x 700mm x 1100mm H Heavy Duty Multi-Drawer Tool Cabinets with 2150mm Worktop 

88 Blank Lot 

89 Blank Lot 

90 Blank Lot 

2005 Emcomat Model EM-17D Precision Lathe, 700 mm Between Centres, Centre height 170 mm, 

Spindle bore 50 mm Dia. 4 spindle speeds from 40~3000 rpm, 4.0/5.3 kW drive. 3 Axis DRO. s/n D3F- 

91 T15-02 

2005 Emco Model FB-6 Universal Milling Machine, 900mm x 500mm Table. 5.5kW Spindle, 18 Spindle 

Speeds 63 - 3,150RPM X Axis 700mm, Y Axis 500mm, Z Axis 500mm, 110mm Swivel Machine Vice, 

92 Heidenhain ND-750 3 Axis DRO s/n F4UT3401 

93 Hilma NC125 125mm Machine Vice 

94 Blank Lot 

95 Lista 1430mm W x 770mm D x 1110mm H Heavy Duty Multidrawer Tool Cabinet 

96 2005 Deckel SOE Tool & Cutter Grinder, s/n 05-9125 

2005 IEPCO AG Micropeen Peenmatic Twin Arm Shot Blast Cabinet, Model Micro 620S w/ Micropeen 250 

97 

Feeder s/no.2005/620-398 

2006 IEPCO AG Micropeen Peenmatic Twin Arm Shot Blast Cabinet, Model Micro 620S w/ Micropeen 250 

Feeder s/no.2005/620-397 

98 

99 Stubinger Micronorm 4 Hopper Grit Dispenser with 5 Bags of Grit 

100 1200mm x 1000mm x 800mm Fettling Booth 

101 Three Kaiser+ Kraft 1200mm x 800mm Band Units 

102 Two EuroKraft 1000mm x 600mm Banded Trollies 

103 Flux IP55 Electric Drum Pump (230V) 



106 Box of Mixed Hand Tools Including Circlip & Long Nose Pliers, Screwdrivers 

107 Blank Lot 

108 Box of Mixed Hand Tools Including Circlip & Long Nose Pliers, Screwdrivers 

109 Box of Mixed Hand Tools Including Pliers, Screwdrivers, Hacksaws, Hammers & Files 






115 Blank Lot 



118 Box of Hexagonal Keys 

119 Box of Assorted Hammers 

120 Blank Lot 

121 Box of Assorted T Handled Drivers 

122 Box of Assorted Steel & Diamond Files & Finishing Stones 




126 Box of Assorted Oil Cans & Funnels 

127 Set of Pre-Set Parallels, 14-50mm 

128 Two Set of Pre-Set Parallels, 14-50mm & 6-24mm 

129 Grattec Hand Deburring Tool 

- 13 -

130 Two NWT Spring Balances, 600N & 100N 

131 Blank Lot 

132 Two Stocks & Selection of Taps (As Lotted) 





137 Gedore Torcofix-K 4550-55 20mm / 3/4" Drive Torque Wrench, 100-550N.m / 75-400lb.ft. 

138 Gedore Torcofix-K 4550-10 1/2" Drive Torque Wrench, 10-100N.m / 10-75lb.ft. With Hex Drive Adaptor 

139 Gedore Torcofix-SE 4550-55 18mm Flat Drive Torque Wrench, 5-50N.m. 

140 Facom Hex Drive Torque Socket Set, 2-10N.m / 3.2mm-10mm (Unused) 

141 Facom Hex Drive Torque Socket Set, 2-10N.m / 3.2mm-10mm 



144 Facom Hex Drive Torque Screwdriver Set, 2-10N.m 

145 Facom Hex Drive Torque Screwdriver Set, 2-10N.m 

146 Reca Hex Drive Socket Set to 14mm, Open Ended Spanners to 30mm & Hexagonal Keys 

147 Reca Hex Drive Socket Set to 14mm, Open Ended Spanners to 30mm & Hexagonal Keys 

148 Holex Socket Set to 32mm, Spanners & Hexagonal Keys (As Lotted) 

149 Gedore Socket Set to 32mm, Spanners & Hexagonal Keys (As Lotted) 

150 Blank Lot 

151 Blank Lot 

152 Open & Ring Spanners Up 27mm & Hexagonal Keys (As Lotted) 



155 Blank Lot 


157 Blank Lot 

158 Two HSS Drill Sets UpTo 10mm with Countersinks & Punch Set 





163 Blank Lot 




167 Two Pryor Size 5 Hand Stamping Sets 

[Total 130] Wedco Steel Milling Cutters including: (20) SGK050 01502 FL10 1,5mm Dia. Ball Nose End 

(Kugel), (20) SGK060 01502 FL16 1,5mm Dia. Ball Nose End (Kugel), (20) SGM040 00302 FL3 0.3mm Dia. 

Ball Nose End (Kugel), (19) SGM040 00402 FL2 0.4mm Dia. Ball Nose End (Kugel), (20) SGM040 00402 

FL3 0.4mm Dia. Ball Nose End (Kugel), (20) SGM040 00502 FL8 0.5mm Dia. Ball Nose End (Kugel), (4) 

SOL070 03004 FL30 3mm Dia. Shaft End (Schaft), & (7) SGM040 00802 FL10 0.8mm Dia. Ball Nose End 

168 (Kugel) 

[Total 130] Wedco Steel Milling Cutters including: (3) SGM040 00802 FL10 0.8mm Dia. Ball Nose End 

(Kugel), (41) SGM040 00802 FL6 0.8mm Dia. Ball Nose End (Kugel), (25) SGM040 00802 FL4 0.8mm Dia. 

Ball Nose End (Kugel), (40) SGM040 00802 FL8 0.8mm Dia. Ball Nose End (Kugel), (4) SRX050 00501 FL4 

0.5mm Dia. Torus / Corner Radius End (Eckenradius), & (17) SGM070 02002 FL10 2mm Dia. Ball Nose End 

169 (Kugel) 

- 14 -

170 

171 

172 

173 

174 

175 

176 

177 

178 

179 

[Total 130] Wedco Steel Milling Cutters including: (7) SGM070 02002 FL10 2mm Dia. Ball Nose End (Kugel), 

(11) SGM070 03002 FL35 3mm Dia. Ball Nose End (Kugel), (20) SGM070 04002 FL16 4mm Dia. Ball Nose 

End (Kugel), (10) SGM070 04002 FL25 4mm Dia. Ball Nose End (Kugel), (39) SGM070 04002 FL35 4mm 

Dia. Ball Nose End (Kugel), (4) SGM080 06002 FL40 6mm Dia. Ball Nose End (Kugel), (8) SOK040 01001 

FL8 1mm Dia. Shaft End (Schaft), (4) SRK050 00501 FL4 0.5mm Dia Torus / Corner Radius End 

(Eckenradius), & (27) SGM040 01004 FL6 1mm Dia. Ball Nose End (Kugel) 

[Total 130] Wedco Steel Milling Cutters including: (3) SOK040 01004 FL6 1mm Dia. Shaft End (Schaft), (18) 

SOK040 01004 FL8 1mm Dia. Shaft End (Schaft), (7) SOK050 03004 FL12 3mm Dia. Shaft End (Schaft), (3) 

SOK050 03004 FL20 3mm Dia. Shaft End (Schaft), (9) SOK070 10004 FL35 10mm Dia. Shaft End (Schaft), 

(30) SOL070 03004 FL30 3mm Dia. Shaft End (Schaft), (18) SRK060 01002 FL4 1mm Dia. Torus / Corner 

Radius End (Eckenradius), (7) SRK060 01502 FL4 1.5mm Dia. Torus / Corner Radius End (Eckenradius), 

(15) SRK060 02002 FL16 2mm Dia. Torus / Corner Radius End (Eckenradius), (4) SRK050 00502 FL4 

0.5mm Dia. Torus / Corner Radius End (Eckenradius), & (16) SRK060 04002 FL20 4mm Dia. Torus / Corner 

Radius End (Eckenradius) 

[Total 130] Wedco Steel Milling Cutters including: (5) SRK060 04002 FL20 4mm Dia. Torus / Corner Radius 

End (Eckenradius), (10) SRK060 04002 FL20 4mm Dia. Torus / Corner Radius End (Eckenradius), (22) 

SRK070 10005 FL35 10mm Dia. Torus / Corner Radius End (Eckenradius), (21) SRX050 00801 FL8 0.8mm 

Dia. Torus / Corner Radius End (Eckenradius), (15) SFPK070 06004 FL30 6mm Dia. Shaft End (Schaft), (20) 

SGL070 03002 FL35 3mm Dia. Ball Nose End (Kugel), (19) SGM040 00302 FL1 0.3mm Dia. Ball Nose End 

(Kugel), (4) SRX050 00501 FL4 0.5mm Dia. Torus / Corner Radius End (Eckenradius), & (14) SGM040 

00302 FL2 0.3mm Dia. Ball Nose End (Kugel) 

[Total 130] Wedco Copper Milling Cutters including: (5) SGM040 00302 FL2 0.3mm Dia. Ball Nose End 

(Kugel), (13) SGM040 00402 FL1 0.4mm Dia. Ball Nose End (Kugel), (5) SGM070 01002 FL10 1mm Dia. 

Ball Nose End (Kugel), (15) SGM070 01002 FL4 1mm Dia. Ball Nose End (Kugel), (23) SGM070 01002 FL5 

1mm Dia. Ball Nose End (Kugel), (5) SGM070 01002 FL6 1mm Dia. Ball Nose End (Kugel), (10) SGM070 

01502 FL8 1.5mm Dia. Ball Nose End (Kugel), (6) SGM070 02002 FL16 2mm Dia. Ball Nose End (Kugel), 

(10) SGM070 03002 FL20 3mm Dia. Ball Nose End (Kugel), (2) SGM080 06002 FL20 6mm Dia. Ball Nose 

End (Kugel), (6) SGM080 06002 FL40 6mm Dia. Ball Nose End (Kugel), (4) SRX050 00501 FL4 0.5mm Dia. 

Torus / Corner Radius End (Eckenradius), & (26) SGX050 00502 FL2 0.5mm Dia. Ball Nose End (Kugel) 

[Total 130] Wedco Copper Milling Cutters including: (24) SGM050 00502 FL2 0.5mm Dia. Ball Nose End 

(Kugel), (30) SOK050 03004 FL12 0.5mm Dia. Shaft End (Schaft), (20) SOL060 01004 FL10 3mm Dia. Shaft 

End (Schaft), (19) SOL060 01004 FL14 1mm Dia. Shaft End (Schaft), (20) SRX060 01002 FL6 1mm Dia. 

Torus / Corner Radius End (Eckenradius), (4) SRX050 00501 FL6 0.5mm Dia. Torus / Corner Radius End 

(Eckenradius), (13) SRK060 01002 FL8 1mm Dia. Torus / Corner Radius End (Eckenradius), & (6) SRK060 

01002 FL8 1mm Dia. Torus / Corner Radius End (Eckenradius) 

[Total 130] Wedco Copper Milling Cutters including: (30) SRK060 01502 FL4 1.5mm Dia. Torus / Corner 

Radius End (Eckenradius), (50) SRX050 00501 FL4 0.5mm Dia. Torus / Corner Radius End (Eckenradius), 

(24) SRX050 00501 FL6 0.5mm Dia. Torus / Corner Radius End (Eckenradius), & (20) SRX050 00802 FL4 

1mm Dia. Torus / Corner Radius End (Eckenradius) 

[Total 130] Wedco Steel Milling Cutters including: (10) SRX050 00801 FL4 0.85mm Dia. Torus / Corner 

Radius End (Eckenradius), (30) SRX050 00801 FL6 0.8mm Dia. Torus / Corner Radius End (Eckenradius), 

(18) SRX050 00801 FL8 0.8mm Dia. Torus / Corner Radius End (Eckenradius), (20) SRK060 01502 FL8 

1.5mm Dia. Torus / Corner Radius End (Eckenradius), (20) SRK060 01002 FL10 1mm Dia. Torus / Corner 

Radius End (Eckenradius), (2) SRX050 00501 FL6 0.5mm Dia. Torus / Corner Radius End (Eckenradius), (2) 

SRX050 00501 FL4 0.5mm Dia. Torus / Corner Radius End (Eckenradius), & (10) SGK060 01002 FL12 1mm 

Dia. Torus / Corner Radius End (Eckenradius) 

[Total 130] Wedco Steel Milling Cutters including: (10) SGK060 01002 FL12 1mm Dia. Ball Nose End (Kugel), 

(20) SGK060 01502 FL12 1.5mm Dia. Ball Nose End (Kugel), (30) SGK080 06002 FL40 6mm Dia. Ball Nose 

End (Kugel), (10) SGL070 03002 FL35 3mm Dia. Ball Nose End (Kugel), (28) SGL070 04002 FL35 4mm Dia. 

Ball Nose End (Kugel), (11) SGM040 00302 FL1 0.3mm Dia. Ball Nose End (Kugel), (4) SRX050 00801 FL4 

0.8mm Dia. Torus / Corner Radius End (Eckenradius), & (17) SGM040 00502 FL4 0.5mm Dia. Ball Nose End 

(Kugel) 

[Total 130] Wedco Steel Milling Cutters including: (20) SGM040 00502 FL6 0.5mm Dia. Ball Nose End 

(Kugel), (30) SGM040 00802 FL10 0.8mm Dia. Ball Nose End (Kugel), (15) SGM040 00802 FL4 0.8mm Dia. 

Ball Nose End (Kugel), (40) SGM070 01502 FL10 1.5mm Dia. Ball Nose End (Kugel), (10) SGM070 01502 

FL12 1.5m Dia. Ball Nose End (Kugel), (9) SOK040 01004 FL6 1mm Dia. Shaft End (Schaft), (4) SRX050 

00801 FL4 0.8mm Dia. Torus / Corner Radius End (Eckenradius), & (2) SOK050 03004 FL12 3mm Dia. Shaft 

End (Schaft) 


SOK060 03004 FL20 3mm Dia. Shaft End (Schaft), (6) SOL060 02004 FL16 2mm Dia. Shaft End (Schaft), 

(20) SRK060 01502 FL12 1.5mm Dia. Torus / Corner Radius End (Eckenradius), (20) SRK060 01502 FL15 

1.5mm Dia. Torus / Corner Radius End (Eckenradius), (9) SRK060 04002 FL20 4mm Dia. Torus / Corner 

Radius End (Eckenradius), (20) SGK080 06002 FL40 6mm Dia. Ball Nose End (Schaft), (4) SRX050 00801 

FL6 0.8mm Dia. Torus / Corner Radius End (Eckenradius), & (3) SGL070 03002 FL35 3mm Dia. Ball Nose 

End (Kugel) 

- 15 -

[Total 130] Wedco Steel Milling Cutters including: (7) SGL070 03002 FL35 3mm Dia. Ball Nose End (Kugel), 

(42) SGM040 00502 FL2 05mm Dia. Ball Nose End (Kugel), (14) SGM040 00802 FL10 0.8mm Dia. Ball 

Nose End (Kugel), (13) SGM040 00802 FL6 0.8mm Dia. Ball Nose End (Kugel), (15) SGM040 00802 FL8 

0.8m Dia. Ball Nose End (Kugel), (20) SOK040 01004 FL6 1mm Dia. Shaft End (Schaft), (4) SRX050 00801 

FL6 0.8mm Dia. Torus / Corner Radius End (Eckenradius), & (15) SOL070 03004 FL30 3mm Dia. Shaft End 

180 (Schaft) 

181 NSK Espert 500 high Speed Hand Deburring & Grinding Tool (230V) 



184 NSK Espert 500 high Speed Hand Deburring & Grinding Tool (230V) (Boxed/Unused) 

185 NSK Espert 500 high Speed Hand Deburring & Grinding Tool (230V) (Boxed/Unused) 

186 NSK Sheenus Ultrasonic Polisher (230V) 

187 Desoutter ESP 7 Programmable Electronic Screwdriver (230V) 

188 Profiline YPL151 150mm DE bench Grinder (230V) 

189 Einhell WSG960/125 125mm Angle Grinder with Bench Adapter (230V) 

190 Selter 70.01.001 Portable Demagnetiser (230V) 

191 Wagner 211-15/40 Bench Top Demagnetiser (230V) 

192 Blank Lot 

193 Blank Lot 

194 Blank Lot 

195 Blank Lot 

196 Blank Lot 

197 Blank Lot 

198 Blank Lot 

199 Blank Lot 

200 Euromex XTL-600 Binocular Microscope s/n.A06036051 With EK-1 Ring Illuminator 

201 Euromex XTL-600 Binocular Microscope s/n.A06036058 With EK-1 Ring Illuminator 

202 Blank Lot 

203 Blank Lot 

204 Blank Lot 

205 Mitutoyo 377-966E Binocular Microscope s/n 000013 With SW Mini-Lamp Ring Illuminator 



208 SW Mini-Lamp Ring Illuminator 

209 Scholly Flexilux 2000 Fiberoptic Illuminator 

210 Motic Moticam 2000 Microscope Camera 

211 Cast Iron Surface Plate 400 x 300mm 

212 Atorn Granite Surface Table DIN 876/0 1000 x 630mm 

213 Tesa micro-hite plus M600 Digital Height Gauge s/n.1V 0006 01 

2005 Erowa Preset 3D CNC Model ARES Erowa 775 Mot, Coordinate Measuring Machine X Axis 

214 700mm, Y Axis 750mm, Z Axis 700mm, s/n 2018 2059 


215 700mm, Y Axis 750mm, Z Axis 700mm, s/n 2032 2062. Renishaw MH20i Probe, Dell PC 


700mm, Y Axis 750mm, Z Axis 700mm, s/n 2034 2084. Renishaw MH20i Probe, Dell PC & HP Deskjet 

216 5740 Printer 










- 16 -

220 2005. Erowa Lift 2, Pallet Lifter, s/n 318935 001, 400 Volt, 240 kg, Pendant Control 

221 2005. Erowa Lift 2, Pallet Lifter, s/n 323491 001, 400 Volt, 240 kg, Push Button Control 



224 2005. Erowa Lift 2, Pallet Lifter, s/n 030087, 400 Volt, 240 kg, Pendant Control 

225 2006. Erowa Lift 2, Pallet Lifter, s/n AA1726 01, 400 Volt, 240 kg, Pendant Control (Boxed/Unused) 

2003 Makino Model EDNC 43, CNC Sink Erosion Machine with Integrated C Axis, MGH 20-60A 60 Amp 

Generator, 700 x 500mm 'T' Slotted Worktable, X Axis 450mm, Y Axis 350mm, Z Axis 350mm, Work 

Tank W850mm x D650mm x H400mm, Max Fluid Height 350mm, Erowa Model 5-110XL Rotary 

Magazine 20 Workpiece & 120 Electrode Handling System, Kanto Seiki MPDD-05-N-CE Chiller, Makino 

MGH CNC Control, 400V/ 50Hz. Power Hours 15,303, Working Hours 1,878 s/n 80-4055-0105 (Machine 

226 Commissioned 'Unused' 2005) 


2005 Agie Model Agiecut Challenge 2, CNC Wire Erosion Machine w/ Agie Vision CNC Control, Erowa 

Automation Easychange PSW-L 4 Station Rotary Pallet Feed with teach Pendant, X Axis 350mm, Y 

Axis 250mm, Z Axis 256mm, U/V + - 70mm, PSW NRT Spec. Clamping Base, Agie IPG Generator, 

Agieconic Plus, Agiecut Size 2 Automation, Robot Command, Host Control, 1mm Wire Thread Nozzle 

228 For 0.1 - 0.25mm Wires, 400V/50Hz, Power Hours 10,496 Working Hours 3,405. s/n 433 

2005 Roeders Model RFM 600 DSP CNC Electrode Milling Machine, 400mm Dia. Turn & Swivel table, X 

Axis 405mm, Y Axis 405mm, Z Axis 300mm (Table Horizontal) X Axis 300mm, Y Axis 405mm, Z Axis 

300mm (Table Vertical). Erowa Automation Combined Workholder / Toolchange System including 85 x 

HSK40 Tool Stations, 45 x 72mm Dia. Workholder Stations, 12 x 148mm Dia Workholder Stations & 4 

x 280mm x 280mm Workholder Stations. w/Chip Conveyor, Extor 3500-3S-MP Exhaust System, 

Regloplas TAE 015 3.2kWChiller. 400 Volt/50Hz/44KVA. Power Hours 8,500, Working Hours 1,487. s/n 

229 11461-25 

2005 Makino Model V22-A60, CNC Vertical Machining Centre, X Axis 320mm, Y Axis 280mm, Z axis 

300mm, 400 - 40,000 RPM 8.4kW Spindle, 60-Position Automatic Tool Changer, Erowa Automation 

Combined Workholder / Toolchanger System, Makino Professional 5 CNC Controls, 2 x Kanto Seiki 

MRCC-07-H-N-CE Oil Matic Temperature Regulators, SMC IDF6E Air Dryer, Bristol Oil Mist Separator, 

230 Ismet DAWN-G 24.5 Transformer, 400V/50Hz Power Hours 733, Working Hours 557 s/n 80.4047.0006 


2003 Heun Model APOS 600, CNC High-Speed Precision Electrical Discharge Pilot Hole Drilling 

Machine, Clamping Area 600 x 480 x 350mm, Axis Travel X=600mm, Y=400mm, W (Eroding Axis) 

=300mm 60-Position Tool Changer, 400V/50 Hz/5kVA. Power Hours 15,543, Working Hours 238 s/n 

232 6004000209113 

2005 Jung Model JE 630P, CNC Horizontal Surface Grinder, 500 x 250mm Magnetic Chuck w/ Siemens 

Simatic 3-Axis Touchscreen Control, Erba Kalte E61 2/1 KTC-ST Chiller Unit, Airtech MFE 20-SP 

233 Exhaust Air Filtration System, DGS SBF100 Coolant Clarifier. Power Hours 4,298, s/n 1420 

234 Spindle 630 10KW 1:10, Part No. '51JF625NR.1 For Jung JE 630P Grinder 

235 Feed modul 1-Achse 28/56A, Part No. '6SN1123-1AA00-0DA1 For Jung JE 630P Grinder 

236 Control unit 2-Achsen High Standard, Part No. '6SN1118-0DM31-0AA0 For Jung JE 630P Grinder 

237 Control unit 2-Achsen High Standard direct, Part No. '6SN1118-0DM33-0AA0 For Jung JE 630P Grinder 

238 Feed motor, Part No. '1FT6 062-6AC71-4AB 0 For Jung JE 630P Grinder 

239 Feed motor, Part No. '1FT6 062-6AC71-4AB 0 For Jung JE 630P Grinder 

240 Miscellaneous Spares For Jung JE 630P Grinder. 

241 Forty-Two Grinding Wheels For Jung JE 630P Grinder, T1-300 x 10 x 76.2 - T1-300 x 32 x 76.2 

242 Twenty-Eight Grinding Wheels For Jung JE 630P Grinder, T1-300 x 16 x 76.2 - T1-300 x 32 x 76.2 

2005 Jung Model C740D CNC Profile Grinder, Magnetic Chuck, 200MM Diameter Wheel, Siemens 

Sinumerik CNC Controls, Hoffman 1000mm web Paper Filtration Unit, Hyfra VWK 30-1-LS 3.3kW 

243 Chiller, Hoffman D20/200 Exhaust Air Filtration System, Power Hours 2,847, s/n 8204 

244 Control unit 2-axis High Standard, Part No. '6SN1118-0DM31-0AA0 For Jung C 740 D Grinder 

245 Control unit 2-axis High Standard direct, Part No. '6SN1118-0DM33-0AA0 For Jung C 740 D Grinder 

246 Feed motor, Part No. '1FT6 061-6AF71-3AG 1 For Jung C 740 D Grinder 

247 Feed motor, Part No. '1FT6 082-8AC71-1AB 0 For Jung C 740 D Grinder 

248 Feed motor AC, Part No. '1FT6 086-1AF71-1AG 1 For Jung C 740 D Grinder 

249 Main spindle modul, Part No. '6SN1123-1AA01-0FA1 For Jung C 740 D Grinder 

250 Feed modul 2-axis 2x18/36A, Part No. '6SN1123-1AB00-0CA1 For Jung C 740 D Grinder 

251 Grinding spindle 27kw , Part No. '51F740NR. 8-2 For Jung C 740 D Grinder 

- 17 -

252 Miscellaneous Spares For Jung C 740 D Grinder 

253 Six Grinding Wheel Arbors For Jung C 740 D Grinder (Boxed/Unused) 

254 Twenty Grinding Wheels For Jung C 740D Grinder, T1-400 x 16 x 127 - T1-400 x 100 x 127 

255 Twenty-Six Grinding Wheels For Jung C 740D Grinder, T1-400 x 20 x 127 - T1-400 x 63 x 127 

256 Seventeen Grinding Wheels For Jung C 740D Grinder, Up To T1-400 x 80 x 127 

257 Twelve Grinding Wheels For Jung C 740D Grinder, Up To T1-400 x 100 x 127 

258 Six Grinding Wheels For Jung C 740D Grinder 

259 Four Grinding Wheels For Jung C 740D Grinder 

2005 Magerle Model MFP-125-50, CNC Profile Grinder, Siemens Sinumerik CNC Control, Polo 

1000mm Web Paper Filtration Unit, Hyfra TRK 180-EF-W-S 6.5kW Chiller, Sara UC 2 SD Serie 2 

260 Exhaust Air Filtration System, Power Hours 239, s/n 100871 

261 2005. Erowa Lift 2, Pallet Lifter, s/n 314862 003, 400 Volt, 240 kg, Push Button Control 

Bearing set grinding support HSS, Part No. '800-04703-01 For Magerle Model MFP-125-50, CNC Profile 

262 Grinder. 

263 Remote control M500B-komp., Part No. 'F21364 For Magerle Model MFP-125-50, CNC Profile Grinder. 

Wuchtkopf/Empfänger , Part No. 'F21629 For Magerle Model MFP-125-50, CNC Profile Grinder. For Magerle 

264 Model MFP-125-50, CNC Profile Grinder. 

Power modul 120A HSA, Part No. '6SN1123-1AA00-0JA1 For Magerle Model MFP-125-50, CNC Profile 

265 Grinder. 

266 Feed motor digital, Part No. '1FT6082-1AF71-4EH1 For Magerle Model MFP-125-50, CNC Profile Grinder. 

267 Feed motor digital, Part No. '1FK7042-5AF71-4EG1 For Magerle Model MFP-125-50, CNC Profile Grinder. 

268 Feed motor digital, Part No. '1FT6062-1AF71-4EG1 For Magerle Model MFP-125-50, CNC Profile Grinder. 

Hohlwellen-Servomotor, Part No. 'HSDPI-0718.06800.81 For Magerle Model MFP-125-50, CNC Profile 

269 Grinder. 

270 Syncron cardan shaft, Part No. '06.111.15.00.0390 For Magerle Model MFP-125-50, CNC Profile Grinder. 

271 Miscellaneous Spares For Magerle Model MFP-125-50, CNC Profile Grinder. 

272 Two Tyrolit 500 x 200 x 203.2 Grinding Wheels For Magerle Model MFP-125-50, CNC Profile Grinder 

273 Four 500 x 200 x 203.2 Grinding Wheels For Magerle Model MFP-125-50, CNC Profile Grinder 

June 2006 Acsys Lasertechnik Model Shark Muti LKT Laser Engraving Machine, 600 x 600mm Table, ULT 

274 Model LAS500VP Exhaust Air Filtration Unit, Haffner VWK 220/1-S 11.8kW Chiller. s/n AC50262306 

275 Ten Twist Drills 8.6 - 9.1mm 

276 Fifty (Approx) Twist Drills Up to 6.9mm 

277 Thirty (Approx) Twist Drills Up to 10.2mm 

278 Twenty-Five (Approx) Twist Drills Up to 9.1mm 

279 Twenty-Five (Approx) Twist Drills Up to 9.1mm 

280 Thirty (Approx) Twist Drills Up to 8.6mm 

281 Thirty (Approx) Special Twist Drills Up to 5mm (Approx) 

282 Eight (Approx) Special Twist Drills Up to 30mm (Approx) 

283 Thirty (Approx) Special Twist Drills Up to 8mm (Approx) 

284 Six Long Series Special Twist Drills Up to 8mm (Approx) 

285 Thirty Reca Spiralbohrer Special Twist Drills 16.5mm - 19.5mm 

286 Fifty Reca Spiralbohrer Special Twist Drills 10.2mm - 15.5mm 

287 Twenty-Five Botek 8.0 x 310 K15/B 10/05 Drills 

288 Eighteen Botek 8.0 x 285 H15/B 20/06 Drills 

289 Fifty (Approx) Emuge Machine Taps Up to G3/8-X ISO228 

290 Mould Assembly Components on a Pallet, Including Ejectors, Alignment Pins & Bushes 

291 Blank Lot 




295 Hex Screws on a Pallet M5 - M20 

296 Hex Screws on a 3 Pallets M4 - M16 

2005, Georg Render Aqueous Cleaner Model W92WKA, s/n.05/80/DAANSPOAZ w/ (2) 900 x 950mm 

297 Stainless Steel Carts 

- 18 -

298 Elma Transonic TI-H-55 Ultrasonic Cleaner,s/n.7096,D355 450 x 250 x 150mm Basket, 3.9kW, 400V 3ph 

COMPLETE MACHINING CELL LOTS 300 - 307 INCLUDING (6) 2005 MAKINO MODEL V22-A60, CNC 

VERTICAL MACHINING CENTRES, 2005 FANUC ROBOT MODEL R-2000IA/165F ROBOT & EROWA 

299 AUTOMATION. FOOTPRINT 18.4M X 10M. 


300mm, 400 - 40,000 RPM 8.4kW Spindle, 60-Position Automatic Tool Changer, Makino Professional 5 

CNC Control, Buscher Compri HX Chilled water Circulation Pump, Kanto Seiki Oil Matic Temperature 

Regulator, Bristol Oil Mist Separator, SMC IDF6E Air Dryer, Ismet DAWN-G 24.5 Transformer, 

300 400V/50Hz. Power Hours 509, Working Hours 350 s/n 80.4047.0021 


























2005 Fanuc Robot Model R-2000iA 165F, 6-Axis w/ Fanuc R-200iA Controller, s/no.D126 E05408632 w/ 

306 7th Axis, w/ Teach Pendant 

2005 Erowa Automation System Including (3) Tooling Magazine Carousels, Cage, Shelving, (2) Erowa 

307 Lift 2, Control Cabinet & Wiring 

308 Clamping Unit FKD-T-03-002 (HSK-E32SPC), Part No.'Z248D0019000 For Makino Model V22-A60 

309 Cover ; Bellows (X-Axis/Right), Part No.'Z296C0100504 For Makino Model V22-A60 

310 Cover ; Bellows (X-Axis/Left), Part No.'Z296C0100604 For Makino Model V22-A60 

311 (2) 'Ball Screws, Part No.'Z211A3605646 For Makino Model V22-A60 

312 Blank Lot 

313 Servomotor , Z-Axis, Part No.'Z612L0540100 For Makino Model V22-A60 

314 Ball Screw, Part No.'Z211A3605648 For Makino Model V22-A60 

315 Motor A06B-0243-B100, Part No.'Z612L0510100 For Makino Model V22-A60 

316 Cover Telescopic Y-Axis V22, Part No.,'ZHAT208A For Makino Model V22-A60 

317 Pump Motor (Oil feed), Part No.'Y000Y4090026 For Makino Model V22-A60 

318 Trochoid Pumpe, Part No. 2,5MY-750-P4-2520ME For Makino Model V22-A60 

319 Lubrication, Part No.'ZSHW13 For Makino Model V22-A60 

320 Hydraulic Booster, Part No.'CQ2LH160-20-DCI9145I For Makino Model V22-A60 

321 Scale Unit FMC (V22-X), Part No.'ZFTB002A For Makino Model V22-A60 

322 Scale Unit FMC (V22-Y), Part No.'ZFTB003A For Makino Model V22-A60 

323 Scale Unit FMC (V22-Z), Part No.'ZFTB004A For Makino Model V22-A60 

324 Sensor and Set, Part No.'Z623Z2601040 For Makino Model V22-A60 

325 Sensor and Set, Part No.'Z623Z2601040 For Makino Model V22-A60 

326 Liner Gauge, Part No.'Z623Z3101020 For Makino Model V22-A60 

327 Amplifier, Part No.'Z664D0010010 For Makino Model V22-A60 

328 Air Dryer IDF6E-20-X139, Part No.'IDF6E-20-X139 For Makino Model V22-A60 

- 19 -

329 Miscellaneous Spares For Makino Model V22-A60 

330 (46), Diebold Thermogrip HSK 32E 4x50 Toolholders For Makino V22-A60. 








338 (48), Diebold ThermogripHSK 32E 6x50 Toolholders For Makino V22-A60. 





(5) HSK 32E 12x55, (5) HSK 32x4x65, (5) HSK 32x8x70, (6) HSK 32x10x70 Diebold ThermogripToolholders 

343 For Makino V22-A60. 

344 Blank Lot 

[Total 95] Copper Electrodes including: (2) 40x30x50, (3) 40x30x60, (4) 40x30x80, (4) 40x30x100, (5) 

40x30x120, (5) 40x30x140, (5) 40x40x60, (5) 40x40x70, (5) 40x40x80, (5) 40x40x100, (5) 40x40x120, 

(5) 40x40x140, (2) 50x40x50, (5) 50x40x60, (5) 50x40x80, (5) 50x40x100, (5) 50x40x120, (5) 60x40x80, (5) 

345 60x40x100, (5) 60x40x120, (5) 60x40x140, 

346 (100) Special Twist Drills Up to 12mm (Approx) in one Box 

347 Blank Lot 

COMPLETE MACHINING CELL LOTS 349 - 353 INCLUDING (3) X 2005 TOYODA MITSUI SEIKI MODEL 

HU40A, CNC HORIZONTAL MACHINING CENTRES, 2005 FANUC ROBOT MODEL R-2000IA/165F & 

348 EROWA AUTOMATION. FOOTPRINT 19.9M X 11.8M. 

2005 Toyoda Mitsui Seiki Model HU40A, CNC Horizontal Machining Centre, 2APC 2 x 400 x 400mm 

Pallet Changer, 210-Position ATC, w/ Fanuc Series 16i-M 4 Axis CNC Control, X Axis 560mm, Y Axis 

560mm, Z Axis 560mm, Infinite B Axis Option, Swarf Conveyor, Hyfra TRK50-OF-S Chiller, Knoll 

PF70/800 Coolant Clarifier, 120 - 12,000RPM Spindle BT-40 Modification to BIG-PLUS. Power Breaker, 

Cleaning Gun, ATLS Broken Tool Detection, Free Tool Assignment, Expired Tool Resetting, Fanuc 

349 Tool Life Management, Working Hours 567. s/no. 568. 






350 Tool Life Management, Working Hours 1,621. s/no. 566. 






351 Tool Life Management, Working Hours 1,000. s/no. 569. 

2005 Fanuc Robot Model R-2000iA 165F, 6-Axis w/ Fanuc R-200iA Controller, s/no.D126 E05408632 w/ 

352 7th Axis, w/ Teach Pendant 

Erowa Automation System Including (1) Magazine Carousel, Shelves, Cage, Erowa Lift 2, Controls 

353 Cabinet & Wiring 

354 Spare Spindle For Toyoda Mitsui Seiki Model HU40A 

Miscellaneous Spares For Toyoda Mitsui Seiki Model HU40A including 'O' Rings, Oil Seals & Electrical 

355 Sandries 

356 (5) Big Daishowa 20D-75 Collet Chucks For Toyoda Mitsui Seiki Model HU40A With Collets (As Lotted) 

357 (3) Big Daishowa ISL 20-75 Collet Chucks With Collets (As Lotted) 

358 (6) Big Daishowa 16N-6016N-60 Collet Chucks With Collets (As Lotted) 

359 (1) Big Daishowa 13 N-60 Collet Chuck With Collets (As Lotted) 




- 20 -













375 (1) Big Daishowa 13 E-75 Collet Chuck With Collets (As Lotted) 










385 (12) Big Daishowa 13 E-75 Collet Chucks With Collets (As Lotted) 









394 (100) Big Daishowa Collets (As Lotted) 

395 (2300 kg) Various unmachined Steel Blocks on 3 Pallets (Orvar and Hotvar) 

396 (70) Various pre machined Steel Blocks on 4 Paletts (Orvar and Hotvar) 



399 Blank Lot 

400 Blank Lot 

[Total 121] Wedco Steel Milling Cutters including: (50) SGX050 00502 FL4, 0.5mm Dia.Ball Nose End 

(Kugel), (50) SGHK070 08002 FL30,8mm Dia.Ball Nose End (Kugel) & (21) SRK050 01002 FL6 1mm Dia. 

401 Torus / Corner Radius End (Eckenradius) 

[Total 121] Wedco Steel Milling Cutters including: (50) SGHK050 01502 FL8 1.5mm Dia. Ball Nose End 

(Kugel), (50) SRK070 12010 FL40 12mm Dia. Torus / Corner Radius End (Eckenradius) & (21) SRK050 

402 01002 FL6 1mm Dia. Torus / Corner Radius End (Eckenradius) 

[Total 121] Wedco Steel Milling Cutters including: (5) SGX050 00502 FL4 .5mm Dia. Ball Nose End (Kugel), 

(21) SGX050 00502 FL6 .5mm Dia. Ball Nose End (Kugel), (47) SGHK050 01502 FL8 1.5mm Dia. Ball Nose 

403 End (Kugel) & (48) SRK064 04002 FL25 4mm Dia. Torus / Corner Radius End (Eckenradius) 


(50) SGHK050 01502 FL12 1.5mm Dia. Ball Nose End (Kugel) & (50) SRK060 01502 FL8 1.5mm Dia. 

404 Torus / Corner Radius End (Eckenradius) 

- 21 -

405 

406 

407 

408 

409 

410 

411 

412 

413 

414 

415 

416 

417 

418 

419 

[Total 121] Wedco Steel Milling Cutters including: (50) SGHK050 02002 FL8 2mm Dia. Ball Nose End 

(Kugel), (48) SVH064 04002 FL12 4mm Dia. Ball Nose End (Kugel), (2) SRK070 08010 FL35 8mm Dia. 

Torus / Corner Radius End (Eckenradius), (2) SOL080 01004 FL10 1mm Dia. Shaft End (Schaft), (2) SOK050 

03004 FL20 3mm Dia. Shaft End (Schaft), (4) SRK070 12010 FL40 12mm Dia. Torus / Corner Radius End 

(Eckenradius), (2) SRK070 08010 FL25 8mm Dia. Torus / Corner Radius End (Eckenradius), (3) SGHK070 

08002 FL30 8mm Dia. Ball Nose End (Kugel), (4) SGHK070 10007 FL30 10mm Dia. Ball Nose End (Kugel), 

(3) SGHK050 01502 FL12 1.5mm Dia. Ball Nose End (Kugel), & (1) SOL080 01004 FL30 1mm Dia. Shaft 

End (Schaft) 

[Total 121] Wedco Steel Milling Cutters including: (50) SOK040 01004 FL8 1mm Dia. Shaft End (Schaft), 

(50) SRK070 12010 FL40 12mm Dia. Torus / Corner Radius End (Eckenradius), (1) SOL080 01004 FL20 

1mm Dia. Shaft End (Schaft), (1) SOK040 01004 FL8 1mm Dia. Shaft End (Schaft), (5) SRK070 06010 FL30 

6mm Dia. Torus / Corner Radius End (Eckenradius), (4) SRK050 08010 FL20 8mm Dia. Torus / Corner 

Radius End (Eckenradius), (4) SVH064 03002 FL20 3mm Dia. Ball nose end (Kugel), & (2) SGHK050 02002 

FL8 2mm Dia. Ball nose end (Kugel), 


(Kugel), (21) SGHK070 06002 FL30 6mm Dia. Ball Nose End (Kugel) & (50) SOK080 10004 FL40 10mm 

Dia.Shaft End (Schaft) 


(Kugel), (21) SGHK070 06002 FL30 6mm Dia. Ball Nose End (Kugel) & (50) SRK070 12010 FL40 12mm 



(Kugel), (21) SGHK060 02002 FL16 2mm Dia. Ball Nose End (Kugel) & (48) SOK080 10004 FL40 10mm 

Dia. Shaft End (Schaft) 

[Total 121] Wedco Steel Milling Cutters including: (50) SGHL060 01002 FL8 1mm Dia. Ball Nose End (Kugel), 

(21) SGHK060 02002 FL16 2mm Dia. Ball Nose End (Kugel) & (50) SRK070 12010 FL40 12mm Dia. Torus / 

Corner Radius End (Eckenradius) 


(Kugel), (49) SGX040 00502 FL4 0.5mm Dia. Ball Nose End (Kugel), (10) SGHK050 02002 FL12 2mm Dia. 

Ball Nose End (Kugel), & (50) SRK070 10010 FL35 10mm Dia. Torus / Corner Radius End (Eckenradius) 


(Kugel), (50) SVH064 03002 FL10 3mm Dia. Ball Nose End (Kugel) & (50) SRK070 10010 FL35 10mm Dia. 

Torus / Corner Radius End (Eckenradius) 


(Kugel), (50) SRK080 08020 FL56 8mm Dia. Torus / Corner Radius End (Eckenradius), (3) SGHK070 06002 

FL16 6mm Dia. Ball Nose End (Kugel), (6) SGHK040 01002 FL6 1mm Dia. Ball Nose End (Kugel), (4) 

SGHK060 02002 FL16 2mm Dia. Ball Nose End (Kugel), (4) SGHK070 01002 FL7 1mm Dia. Ball Nose End 

(Kugel), & (4) SOK040 01002 FL10 1mm Dia. Shaft End (Schaft) 


(50) SRK080 08020 FL56 8mm Dia. Torus / Corner Radius End (Eckenradius), (9) SGM070 01002 FL10 

1mm Dia. Ball nose end (Kugel), (6) SGHK060 04002 FL15 4mm Dia. Ball nose end (Kugel), & (6) SVH070 

04002 FL10 4mm Dia. Ball nose end (Kugel) 


(45) SRK070 10010 FL35 10mm Dia.Torus / Corner Radius End (Eckenradius), (25) SOK060 03004 FL30 

3mm Dia. Shaft End (Schaft), (25) SRK050 01502 FL8 1.5mm Dia.Torus / Corner Radius End (Eckenradius), 

(4) SRK064 04002 FL20 45mm Dia.Torus / Corner Radius End (Eckenradius), & (1) SGHK070 06002 FL16 

6mm Dia.Ball Nose End (Kugel) 


(Kugel), (6) SGHK070 08002 FL30 8mm Dia. Ball Nose End (Kugel), (47) SRK080 08020 FL56 8mm Dia. 

Torus / Corner Radius End (Eckenradius), (2) SGHK050 01002 FL4 1mm Dia. Ball Nose End (Kugel), (8) 

SRK060 04010 FL28 4mm Dia. Torus / Corner Radius End (Eckenradius), & (8) SRK060 04010 FL20 4mm 



(Kugel), (21) SGHK070 08002 FL20 8mm Dia.Ball Nose End (Kugel) & (50) SOK050 03002 FL12 3mm Dia. 

Shaft end (Schaft) 

[Total 121] Wedco Steel Milling Cutters including: (21) SGHL060 01002 FL8 1mm Dia. Ball Nose End 

(Kugel), (53) SGHK060 02002 FL16 2mm Dia. Ball Nose End (Kugel), (7) SOK070 10004 FL30 10mm Dia. 

Shaft end (Schaft), (18) SRK060 06010 FL20 6mm Dia. Torus / Corner Radius End (Eckenradius), (10) 

SGX050 00502 FL2 0.5mm Dia. Ball Nose End (Kugel), (3) SGHK050 02002 FL12 2mm Dia. Ball Nose End 

(Kugel), & (9) SFPL085 06004 FL42 6mm Dia. Shaft end (Schaft) 

[Total 121] Wedco Steel Milling Cutters including: (50) SVH064 04002 FL25 4mm Dia. Ball Nose End 

(Kugel), (50) SOK050 01004 FL20 1mm Dia. Shaft End (Schaft), (1) SGHK050 01502 FL8 1.5mm Dia. Ball 

Nose End (Kugel), (19) SOK070 06004 FL30 6mm Dia. Shaft End (Schaft), & (1) SGHK050 01002 FL4 1mm 

Dia. Ball Nose End (Kugel) 

- 22 -

420 

421 

422 

423 

424 

425 

426 

427 

428 

429 

430 

431 

432 

433 

434 

435 

436 

[Total 121] Wedco Steel Milling Cutters including: (50) SVH064 04002 FL16 4mm Dia. Ball Nose End 

(Kugel), (50) SOK040 01004 FL6 1mm Dia. Shaft End (Schaft) & (21) SGHK050 02002 FL12 2mm Dia. Ball 

Nose End (Kugel) 


(Kugel), (50) SOK040 02004 FL12 2mm Dia. Shaft End (Schaft), & (25) SOK050 01004 FL20 1mm Dia. 

Shaft end (Schaft) 


(Kugel), (50) SGH060 02002 FL16 2mm Dia. Ball Nose End (Kugel) & (50) SOL080 08004 FL40 8mm Dia. 

Shaft End (Schaft) 


(21) SRK060 01502 FL12 1.5mm Dia. Torus / Corner Radius End (Eckenradius), (1) SRK050 01002 FL8 

1mm Dia. Torus / Corner Radius End (Eckenradius), (25) SRK064 03002 FL12 3mm Dia. Torus / Corner 

Radius End (Eckenradius), (4) SRK070 12010 FL40 12mm Dia. Torus / Corner Radius End (Eckenradius), (5) 

SVH064 04002 FL25 45mm Dia. Ball nose end (Kugel), (7) SOL080 02504 FL10 2.5mm Dia. Shaft end 

(Schaft), (7) SOL080 08004 FL40 8mm Dia. Shaft end (Schaft), & (1) SSGHK050 01502 FL12 1.5mm Dia. 

Ball nose end (Kugel) 



1.5mm Dia. Torus / Corner Radius End (Eckenradius), & (25) SRK060 06010 F20 6mm Dia. Torus / Corner 



(Kugel), (21) SOL080 01004 FL30 1mm Dia. Schaft, (28) SOL080 08004 FL40 8mm Dia. Shaft End (Schaft), 

(26) SGHK070 08002 FL20 8mm Dia. Ball Nose End (Kugel), (20) SOK070 06004 FL30 6mm Dia. Shaft end 

(Schaft), & (4) SRK050 01002 FL8 1 Dia. Torus / Corner Radius End (Eckenradius) 


(Kugel), (50) SGHK050 02002 FL12 2mm Dia. Ball Nose End (Kugel), (42) 10mm Dia. Torus / Corner 

Radius End (Eckenradius) & (8) SRK070 12010 FL40 12mm Dia. Torus / Corner Radius End (Eckenradius) 

[Total 121] Wedco Steel Milling Cutters including: (21) SFPL085 06004 FL42 6mm Dia. Shaft End (Schaft), 

(50) SRK050 02002 FL8 2mm Dia. Torus / Corner Radius End (Eckenradius) & (50) SRK060 04010 FL12 

4mm Dia. Torus / Corner Radius End (Eckenradius) 

[Total 121] (50) SOK040 01004 FL6 1mm Dia. Shaft End (Schaft), (25) SOK050 03004 FL20 3mm Dia. 

Shaft End (Schaft), (1) SRK070 08010 FL40 8mm Dia. Torus / Corner Radius End (Eckenradius), (10) 

SOK070 06004 FL30 6mm Dia. Shaft End (Schaft), (28) SRK050 01002 FL8 1mm Dia. Torus / Corner 

Radius End (Eckenradius), & (1) SRK050 01002 FL6 1mm Dia. Torus / Corner Radius End (Eckenradius), 


(Kugel), (21) SRK050 02002 FL12 2mm Dia. Torus / Corner Radius End (Eckenradius) & (50) SRK080 08020 

FL56 8mm Dia. Torus / Corner Radius End (Eckenradius) 


End (Eckenradius), (50) SRK050 02002 FL8 2mm Dia. Torus / Corner Radius End (Eckenradius) & (50) 

SRK060 04010 FL12 4mm Dia. Torus / Corner Radius End (Eckenradius) 


(Kugel), (50) SRK060 04010 FL12 4mm Dia. Torus / Corner Radius End (Eckenradius) & (21) SRK064 



(Kugel), (50) SRK070 08010 FL25 8mm Dia. Torus / Corner Radius End (Eckenradius), (25) SVH064 03002 

FL20 3mm Dia. Ball Nose End (Kugel), (15) SOK040 02002 FL8 2mm Dia. Shaft end (Schaft), & (10) 

SOK070 08004 FL20 8mm Dia. Shaft end (Schaft) 


(21) SFPK070 06004 FL30 6mm Dia. Shaft End (Schaft) & (50) SRK060 04010 FL28 4mm Dia. Torus / 


[Total 121] Wedco Steel Milling Cutters including: (50) SGX050 00502 FL2 .5mm Dia. Ball Nose End 

(Kugel), (21) SFPK070 08006 FL30 8mm Dia. Shaft End (Schaft), (40) SRK060 04010 FL28 4mm Dia. Torus 

/ Corner Radius End (Eckenradius), & (10) SOL085 01004 FL55 1mm Dia. Shaft end (Schaft) 


(21) SRK070 08010 FL40 8mm Dia. Torus / Corner Radius End (Eckenradius), (20) SGX050 00502 FL4 

0.5mm Dia. Ball nose end (Kugel), (10) SVH070 04002 FL16 4mm Dia. Ball nose end (Kugel), & (20) 

SOK070 06004 FL20 6mm Dia. Shaft end (Schaft) 


(21) SRK050 01002 FL8 1mm Dia. Torus / Corner Radius End (Eckenradius), (3) SRK070 12010 FL40 12mm 

Dia. Torus / Corner Radius End (Eckenradius), (40) SRK060 04010 FL12 4mm Dia. Torus / Corner Radius 

End (Eckenradius), & (7) SGX050 00502 FL6 0.5mm Dia. Ball nose end (Kugel) 

- 23 -

437 

438 

439 

440 

441 

442 

443 

444 

445 

446 

447 

448 

449 

450 

451 

452 

453 



12mm Dia. Torus / Corner Radius End (Eckenradius), (16) SGHK050 01002 FL4 1mm Dia. Ball nose end 

(Kugel), (2) SGHL070 01002 FL8 1mm Dia. Ball nose end (Kugel), (10) SVH070 04002 FL25 4mm Dia. Ball 

nose end (Kugel), (25) SRK050 01002 FL6 1mm Dia. Torus / Corner Radius End (Eckenradius), & (11) 

SGHK050 01502 FL12 1.5mm Dia. Ball nose end (Kugel) 


(21) SGHK050 02002 FL8 2mm Dia. Ball nose end (Kugel) & (30) SRK070 08010 FL40 8mm Dia. Torus / 



SRK070 08010 FL25 8mm Dia. Torus / Corner Radius End (Eckenradius), (25) SGX050 00502 FL6 0.5mm 

Dia. Ball nose end (Kugel), (25) SGHK050 02002 FL10 2mm Dia. Ball nose end (Kugel), & (19) SGX050 

00502 FL4 1mm Dia. Ball nose end (Kugel) 


(Kugel), (50) SOK070 06004 FL20 6mm Dia. Shaft End (Schaft), (1) SGHK040 02002 FL10 2mm Dia. Ball 

nose end (Kugel, & SRK060 01502 FL12 1.5mm Dia. Torus / Corner Radius End (Eckenradius) 


(Kugel), (50) SOK040 02004 FL8 2mm Dia. Shaft End (Schaft), (1) SOK070 10004 FL30 10mm Dia. Shaft 

End (Schaft) & (20) SRK050 01002 FL4 1mm Dia. Torus / Corner Radius End (Eckenradius) 


SOK080 10004 FL40 10mm Dia. Shaft End (Schaft), (6) SRK050 01002 FL4 1mm Dia. Torus / Corner Radius 

End (Eckenradius), (12) SRK060 02002 FL16 2mm Dia. Torus / Corner Radius End (Eckenradius), (6) 

SRK070 08010 FL40 8mm Dia. Torus / Corner Radius End (Eckenradius), (5) SVH064 03002 FL20 3mm Dia. 

Ball nose end (Kugel), (30) SVH064 03002 FL10 4mm Dia. Ball nose end (Kugel), & (9) SRK060 01502 FL12 

1.5mm Dia. Torus / Corner Radius End (Eckenradius) 


(52) SFPK070 08006 FL30 8mm Dia. Shaft End (Schaft), (19) SFPK070 08006 FL40 8mm Dia. Shaft End 

(Schaft) & (55) SRK070 03002 FL16 3mm Dia. Torus / Corner Radius End (Eckenradius) 


(3) SFPK070 06004 FL30 6mm Dia. Shaft End (Schaft), (20) SVH064 03002 FL10 3mm Dia. Ball Nose End 

(Kugel), (15) SGHK070 06002 FL30 6mm Dia. Ball Nose End (Kugel), (35) SOK040 01004 FL8 1mm Dia. 

Shaft End (Schaft), & (3) SRK050 01002 FL4 1mm Dia. Torus / Corner Radius End (Eckenradius) 

[Total 121] Wedco Steel Milling Cutters including: (18) SGK070 06002 FL30 6mm Dia. Ball Nose End (Kugel), 

(3) SOK040 01004 FL6 1mm Dia. Shaft End (Schaft), (26) SOK070 08004 FL30 8mm Dia. Shaft End 

(Schaft), (24) SOL080 08004 FL40 8mm Dia. Shaft End (Schaft) & (50) SRK050 02002 FL12 2mm Dia. 


[Total 121] Wedco Steel Milling Cutters including: 918) SGHK050 01502 FL8 1.5mm Dia. Ball Nose End 

(Kugel), (50) SOK040 01004 FL10 1mm Dia. Shaft End (Schaft), (50) SOK060 03004 FL30 3mm Dia. Shaft 

End (Schaft) & (3) SRK060 04010 FL12 4mm Dia. Torus / Corner Radius End (Eckenradius) 


(50) SVH064 04002 FL10 4mm Dia. Ball Nose End (Kugel), (3) SRK070 06010 FL15 6mm Dia. Torus / 

Corner Radius End (Eckenradius), (16) SGHL060 01002 FL8 1mm Dia. Ball Nose End (Kugel), & (2) 

SGHK070 08002 FL20 8mm Dia. Ball Nose End (Kugel) 


(50) SGHK050 01002 FL4 1mm Dia. Ball Nose End (Kugel), (5) SGHK040 01002 FL4 1mm Dia. Ball Nose 

End (Kugel) & (50) SGHK070 06002 FL30 6mm Dia. Ball Nose End (Kugel) 


(18) SGX040 00502 FL4 .5mm Dia. Ball Nose End (Kugel), (50) SGHK070 06002 FL30 6mm Dia. Ball Nose 

End (Kugel) & (3) SGHK070 08002 FL30 8mm Dia. Ball Nose End (Kugel) 


(Kugel), (16) SVH064 04002 FL16 4mm Dia. Ball Nose End (Kugel),(5) SGK070 08004 FL20 8mm Dia. Ball 

Nose End (Kugel), (50) SRK070 06010 FL30 6mm Dia. Torus / Corner Radius End (Eckenradius) 


(Kugel), (16) SGHK070 08002 FL20 8mm Dia. Ball Nose End (Kugel), (5) SRK064 04002 FL20 4mm Dia. 

Torus / Corner Radius End (Eckenradius) & (55) SRK070 06010 FL30 6mm Dia. Torus / Corner Radius End 

(Eckenradius) 

[Total 121] Wedco Steel Milling Cutters including: (15) SGHL060 01002 FL8 1mm Dia. Ball Nose End (Kugel), 

(50) SGHK050 02002 FL12 2mm Dia. Ball Nose End (Kugel), (6) SRK050 02002 FL8 2mm Dia.Torus / 

Corner Radius End (Eckenradius) & (50) SRK060 06010 FL20 6mm Dia. Torus / Corner Radius End 

(Eckenradius) 


(Kugel), (8) SVH064 04002 FL10 4mm Dia. Ball Nose End (Kugel), (50) SOK060 03004 FL30 3mm Dia. 

Shaft End (Schaft) & (13) SRK064 03002 FL12 3mm Dia. Torus / Corner Radius End (Eckenradius) 

- 24 -


(Kugel), (15) SVH064 03002 FL20 3mm Dia. Ball Nose End (Kugel), (50) SGHK070 06002 FL30 6mm Dia. 

454 Ball Nose End (Kugel) & (6) SGHK070 06002 FL30 6mm Dia. Ball Nose End (Kugel) 


(Kugel), (51) SVH064 04002 FL16 4mm Dia. Ball Nose End (Kugel), (8) SFPK070 10007 FL30 10mm Dia. 

Shaft End (Schaft), (1) SRK070 08010 FL40 8mm Dia. Torus / Corner Radius End (Eckenradius), (11) 

SGHK050 01002 FL4 1mm Dia. Ball Nose End (Kugel), & (2) SOL080 01004 FL30 1mm Dia. Shaft End 

455 (Schaft) 

[Total 121] Wedco Steel Milling Cutters including: (9) SGHK050 01002 FL6 1mm Dia. Ball Nose End (Kugel), 

(50) SGHK050 02002 FL8 2mm Dia. Ball Nose End (Kugel), (50) SOK070 06004 FL30 6mm Dia. Shaft End 

456 (Schaft) & (12) SOK070 08004 FL30 8mm Dia. Shaft End (Schaft) 


End (Eckenradius), (33) SGX050 00502 FL6 0.5mm Dia. Ball Nose End (Kugel), (10) SFPL085 08006 FL40 

8mm Dia. Shaft End (Schaft), (9) SOL070 10004 FL40 10mm Dia. Shaft End (Schaft), (12) SRK070 10010 

FL30 10mm Dia. Torus / Corner Radius End (Eckenradius), SGL060 01002 FL8 1mm Dia. Ball Nose End 

457 (Kugel), & (3) SGHK050 01502 FL8 1.5mm Dia. Ball Nose End (Kugel) 

458 Blank Lot 

459 Blank Lot 

460 Blank Lot 

461 Blank Lot 

462 Blank Lot 

463 Blank Lot 

464 Blank Lot 

465 Blank Lot 

466 Blank Lot 

467 Blank Lot 

468 Blank Lot 

469 Blank Lot 

470 Blank Lot 

471 Blank Lot 

472 Blank Lot 

COMPLETE CELL LOTS 474 - 483 INCLUDING (7) 2005 ROEDERS TEC MODEL RXP500, CNC 

GRAPHITE ELECTRODE MILLING MACHINES, 2005 FANUC ROBOT MODEL R-2000IA/165F WITH 7TH 

AXIS HORIZONTAL TRANSFER, BUSCHER WW-8080 PROCESS WATER HEAT EXCHANGER AND 

473 PIPEWORK MANIFOLD TO CELL. FOOTPRINT 23.4M X 10.4M. 

2005 Roeders TEC Model RXP500, CNC Graphite Electrode Milling Machine, 200-Position ATC, 

Roders TEC CNC Control, X Axis 500mm, Y Axis 400mm, Z Axis 240mm, 3,000 - 42,000RPM HSK 40 

Spindle, Extor 3500-3S MP exhaust Air Filter, Power Hours 11,941, Working Hours 3,339 s/no. 11404- 

474 33 




475 34 




476 35 

2005 D392, CNC Graphite Electrode Milling Machine, 200-Position ATC, Roders TEC CNC Control, X 

Axis 500mm, Y Axis 400mm, Z Axis 240mm, 3,000 - 42,000RPM HSK 40 Spindle, Extor 3500-3S MP 

exhaust Air Filter, Interlit IKF 380/2785 Chip Conveyor, Interlit SPB 1/600 Paper Filtration Unit, s/no. 

477 11403-32 




478 38 




479 37 

- 25 -




480 36 

2005 Fanuc Model R-2000iA/165 Robot, Fanuc Model R-J3iB Controller, s/n E05406459, w/ Teach 

481 Pendant & 7th. Axis Horizontal Transfer 

482 Erowa Automation System Including (3) Magazine Carousels, Shelving, Cage, Controls, Wiring 

483 Buscher WW-8080 Process Water Heat Exchanger and Pipework Manifold to Cell 

484 Spares For Roeders TEC Model RXP500 

485 Ten Extor Filters 

486 2006, Isi-Industrie-Produkte GMBH TEB/BV2 Exhaust Air Filter Unit s/n.50683/1 

487 Blank Lot 

[Total 133] Diebold Thermogrip Toolholders including: (3) HSK 40x4x65, (1) HSK 40x6x80, (3) HSK 

40x12x90, (40) HSK 40 D_4, (40) HSK 40 D_6, (40) HSK 40 D_8 & (6) HSK 40 D_10 For Roeders TEC 

488 Model RXP500. 


489 40x10x80, (1) HSK 40x12x70, (40) HSK 40 D_4 , (40) HSK 40 D_6 & (40) HSK 40 D_8 

[Total 125] Diebold Thermogrip Toolholders including: (2) HSK 40x8x80, (3) HSK 40x10x80, (40) HSK 40 

490 D_4, (40) HSK 40 D_6 & (40) HSK 40 D_8 


491 40x12x90, (40) HSK 40 D_4, (40) HSK 40 D_6 & (40) HSK 40 D_8 

492 [Total 115] Diebold Thermogrip HSK 40 D_6 Toolholders 




496 Blank Lot 

497 Blank Lot 





502 Blank Lot 

503 Blank Lot 

504 [Total 124] Diebold Thermogrip (65) HSK 40 D_6 and (59) HSK 40 D_4 Toolholders 

(One Box) Nikken Tool Clamper HSK32 and HSK40, Wrench and Toolholders (3) SK6-3, (3) SK6-4, (7) 

505 SK10-3, (2) SK10-4, (2) SK10-6A, (1) SK10-8, & (1) SK10-10 

(One Box) Nikken Tool Clamper HSK32 and HSK40, Wrench and Toolholders (4) SK6-3, (2) SK6-4, (1) SK6- 

506 6, (6) SK10-3, (1) SK10-4, (1) SK10-6A, & (3) SK10-10 

507 Blank Lot 

508 Blank Lot 

509 Blank Lot 

510 Blank Lot 

[Total 114] Wedco Diamond Milling Cutters including: (5)DSGK070 06002 FL30 6mm Dia. Ball Nose End 

(Kugel), (1)DSGK060 03002 FL20 3mm Dia. Ball Nose End (Kugel), (45) DSGL070 03002 FL35 3mm Dia. 

Ball Nose End (Kugel), (13) DSGM040 00802 FL10 .8mm Dia. Ball Nose End (Kugel), (5) DSGM040 00802 

511 FL4 .8mm Dia. Ball Nose End (Kugel), (45) DSGM040 00802 FL8 .8mm Dia. Ball Nose End (Kugel), 

[Total 114] Wedco Diamond Milling Cutters including: (14) DSG060 03002 FL20 3mm Dia. Ball Nose End 

(Kugel), (36) DSGL070 03002 FL35 3mm Dia. Ball Nose End (Kugel), (14) DSGM040 00802 FL10 .8mm 

512 Dia. Ball Nose End (Kugel), (50) DSGM040 mm Dia. Ball Nose End (Kugel), 

[Total 114] Wedco Diamond Milling Cutters including: (41) DSGK060 03002 FL10 3mm Dia. Ball Nose End 

(Kugel), (9) DSGL070 03002 FL35 3mm Dia. Ball Nose End (Kugel), (14) DSGM040 00802 FL10 .8mm Dia. 

513 Ball Nose End (Kugel) & (50) DSGM040 00802 FL4 .8mm Dia. Ball Nose End (Kugel) 

[Total 114] Wedco Diamond Milling Cutters including: (50) DSGK060 03002 FL10 .8mm Dia. Ball Nose End 

(Kugel), (1) DSGM040 00802 FL10 .8mm Dia. Ball Nose End (Kugel), (50) DSGM040 00802 FL4 .8mm Dia. 

514 Ball Nose End (Kugel) & (13) DSRK060 01002 FL4 1mm Dia. Torus / Corner Radius End (Eckenradius) 

[Total 114] Wedco Diamond Milling Cutters including:(50) DSGK060 03002 FL10 3mm Dia. Ball Nose End 


515 Ball Nose End (Kugel) & (13) DSRK060 01002 FL4 1mm Dia. Torus / Corner Radius End (Eckenradius) 

- 26 -

516 

517 

518 

519 

520 

521 

522 

523 

524 

525 

526 

527 

528 

529 

530 

531 

532 

[Total 114] Wedco Diamond Milling Cutters including:(50) DSGK060 03002 FL10 3mm Dia. Ball Nose End 


Ball Nose End (Kugel) & (13) DSRK060 01002 FL4 1mm Dia. Torus / Corner Radius End (Eckenradius) 



Ball Nose End (Kugel), (13) DSOK060 03004 FL20 3mm Dia.Shaft End (Schaft), (1) DSRX050 00801 FL4 

.4mm Dia. Torus / Corner Radius End (Eckenradius) 


(Kugel), (46) DSGL070 03002 FL35 3mm Dia. Ball Nose End (Kugel), (50) DSGM040 00802 FL10 .8mm 

Dia. Ball Nose End (Kugel), (13) DSOL070 03004 FL30 3mm Dia.Shaft End (Schaft), (1) DSRX050 00801 

FL4 .8mm Dia. Torus / Corner Radius End (Eckenradius) 

[Total 114] Wedco Diamond Milling Cutters including: (50) DSGL070 03002 FL35 3mm Dia. Ball Nose End 

(Kugel), (50) DSGK060 02002 FL16 2mm Dia. Ball Nose End (Kugel), (13) DSOL070 03004 FL30 3mm 

Dia.Shaft End (Schaft), (1) DSRX050 00801 FL4 .8mm Dia. Torus / Corner Radius End (Eckenradius) 

[Total 114] Wedco Diamond Milling Cutters including: (50)DSGK060 03002 FL10 3mm Dia. Ball Nose End 


Dia.Shaft End (Schaft), (1) DSRX050 00801 FL4 .8mm Dia. Torus / Corner Radius End (Eckenradius) 


(Kugel), (13) DSGK060 01502 FL16 1.5mm Dia. Ball Nose End (Kugel), (1) DSRX050 00801 FL4 .8mm Dia. 

Torus / Corner Radius End (Eckenradius), (50) DSRX050 00501 FL3 .5mm Dia. Torus / Corner Radius End 

(Eckenradius) 


(Kugel), (50) DSGL070 03002 FL35 3mm Dia. Ball Nose End (Kugel), (51) DSRX050 00801 FL4 .8mm Dia. 



(Kugel), (50) DSGL070 03002 FL35 3mm Dia. Ball Nose End (Kugel), (1) DSRX050 00801 FL4 .8mm Dia. 


(Eckenradius) 


(Kugel), (13) DSRK060 01502 FL12 1.5mm Dia. Torus / Corner Radius End (Eckenradius), (1) DSRX050 

00801 FL4 .8mm Dia. Torus / Corner Radius End (Eckenradius), (50) DSRX050 00501 FL6 .5mm Dia. Torus 

/ Corner Radius End (Eckenradius) 







00801 FL4 .8mm Dia. Torus / Corner Radius End (Eckenradius), (47) DSRK050 00505 FL3 .5mm Dia. Torus 


[Total 114] Wedco Diamond Milling Cutters including: (50) DSGM040 00402 FL3 .4mm Dia. Ball Nose End 





(Kugel), (13) DSRK060 01502 FL15 1.5mm Dia. Torus / Corner Radius End (Eckenradius), (1) DSRK060 

01002 FL10 1mm Dia. Torus / Corner Radius End (Eckenradius), (50) DSRX050 00505 FL3 .5mm Dia. 



(Kugel), (13) DSRK060 01502 FL15 1.5mm Dia. Torus / Corner Radius End (Eckenradius), (1) DSRK060 




(Kugel), (45) DSGK060 00402 FL16 .4mm Dia. Ball Nose End (Kugel), (1) DSRK060 01002 FL10 1mm Dia. 

Torus / Corner Radius End (Eckenradius), (12) DSRX050 00801 FL8 .8mm Dia. Torus / Corner Radius 

End (Eckenradius), (43) DSRX050 00505 FL3 .5mm Dia. Torus / Corner Radius End (Eckenradius) 


(Kugel), (50) DSRM060 06005 FL20 .6mm Dia. Torus / Corner Radius End (Eckenradius), (13) DSRK060 

01502 FL4 1.5mm Dia. Torus / Corner Radius End (Eckenradius), (1) DSRK060 01002 FL10 1mm Dia. 



(Kugel), (50) DSRM060 06005 FL20 6mm Dia. Torus / Corner Radius End (Eckenradius), (13) DSRK060 

01502 FL4 1.5mm Dia. Torus / Corner Radius End (Eckenradius), (1) DSRK060 01002 FL10 1mm Dia. 


- 27 -

533 

534 

535 

536 

537 

538 

539 

540 

541 

542 

543 

544 

545 

546 

547 

548 

549 


(Kugel), (50) DSRM060 06005 FL20 6mm Dia. Torus / Corner Radius End (Eckenradius), (13) DSRX060 

0215 FL20 2mm Dia. Torus / Corner Radius End (Eckenradius), (1) DSRK060 01002 FL10 1mm Dia. Torus / 



(Kugel), (13) DSGL070 04002 FL35 4mm Dia. Ball Nose End (Kugel), (50) DSRM060 06005 FL20 6mm Dia. 

Torus / Corner Radius End (Eckenradius), (1) DSRK060 01002 FL10 1mm Dia. Torus / Corner Radius End 

(Eckenradius) 


(Kugel), (13) DSGK050 02002 FL6 2mm Dia. Ball Nose End (Kugel), (50) DSRK060 02002 FL8 2mm Dia. 


(Eckenradius) 


(Kugel), (13) DSGK050 02002 FL6 2mm Dia. Ball Nose End (Kugel), (50) DSRK060 02002 FL20 2mm Dia. 


(Eckenradius) 


(Kugel), (50) DSRK060 02002 FL12 2mm Dia. Torus / Corner Radius End (Eckenradius), (1) DSRK060 



(Kugel), (13) DSGK050 02002 FL6 2mm Dia. Ball Nose End (Kugel), (50) DSGK060 01002 FL10 1mm Dia. 

Ball Nose End (Kugel), (5) DSGM040 00402 FL3 .4mm Dia. Ball Nose End (Kugel), (1) DSRK060 01002 



(Kugel), (13) DSOL060 02004 FL16 2mm Dia.Shaft End (Schaft), (1) DSRK060 03002 FL12 2mm Dia. 


(Eckenradius), (30) DSRK060 02002 FL12 2mm Dia. Torus / Corner Radius End (Eckenradius) 



Dia.Shaft End (Schaft), (1) DSRK060 03002 FL12 3mm Dia. Torus / Corner Radius End (Eckenradius) 


(Kugel), (50) DSGK060 01002 FL10 1mm Dia. Ball Nose End (Kugel), (13) DSOK040 02004 FL12 2mm 

Dia.Shaft End (Schaft), (1) DSRK060 03002 FL12 3mm Dia. Torus / Corner Radius End (Eckenradius) 

[Total 114] Wedco Diamond Milling Cutters including: (13) DSOK040 02004 FL12 2mm Dia.Shaft End 

(Schaft), (50) DSRM060 06005 FL20 6mm Dia. Torus / Corner Radius End (Eckenradius), (1) DSRK060 


[Total 114] Wedco Diamond Milling Cutters including: (13) DSGM040 00502 FL2 5mm Dia. Ball Nose End 

(Kugel), (50) DSGK060 01002 FL10 1mm Dia. Ball Nose End (Kugel), (50) DSRM070 08005 FL35 8mm 

Dia. Torus / Corner Radius End (Eckenradius), (1) DSRK060 03002 FL12 3mm Dia. Torus / Corner Radius 

End (Eckenradius) 

[Total 114] Wedco Diamond Milling Cutters including: (13) DSGM040 00502 FL2 5mm Dia. Ball Nose End 

(Kugel), (10) 4mm Dia. Ball Nose End (Kugel), (40) DSGK060 04002 FL25 4mm Dia. Ball Nose End (Kugel), 

(50) DSGK060 01002 FL10 1mm Dia. Ball Nose End (Kugel), (1) DSRK060 03002 FL12 3mm Dia. Torus / 


[Total 114] Wedco Diamond Milling Cutters including: (13) DSRM070 06005 FL40 6mm Dia. Torus / Corner 

Radius End (Eckenradius), (50) DSRK060 04002 FL20 4mm Dia. Torus / Corner Radius End (Eckenradius), 

(1) DSRK060 03002 FL12 3mm Dia. Torus / Corner Radius End (Eckenradius), (50) DSRX050 00501 FL4 


[Total 114] Wedco Diamond Milling Cutters including: (50) DSGK060 01502 FL12 1.5mm Dia. Ball Nose End 

(Kugel), (50) DSRM090 08005 FL55 8mm Dia. Torus / Corner Radius End (Eckenradius), (13) DSRM070 

06005 FL40 6mm Dia. Torus / Corner Radius End (Eckenradius), (1) DSRK060 03002 FL12 3mm Dia. Torus 







(Kugel), (50) DSGK060 01502 FL12 1.5mm Dia. Ball Nose End (Kugel), (50) DSRM090 08005 FL55 8mm 







- 28 -

550 

551 

552 

553 

554 

555 

556 

557 

558 

559 

560 

561 

562 

563 

564 

565 






(Kugel), (13) DSOK040 02004 FL12 2mm Dia.Shaft End (Schaft), (50) DSRK070 04002 FL30 4mm Dia. 


(Eckenradius) 










(Kugel), (13) DSOL060 02004 FL16 2mm Dia.Shaft End (Schaft), (50) DSRK060 03002 FL16 3mm Dia. 


(Eckenradius) 


(Kugel), (50) DSGK060 01502 FL12 1.5mm Dia. Ball Nose End (Kugel), (50) DSRK060 03005 FL8 3mm 



[Total 114] Wedco Diamond Milling Cutters including: (50) DSGK060 01502 FL12O 1.5mm Dia. Ball Nose 

End (Kugel), (13) DSOK040 02004 FL8 2mm Dia.Shaft End (Schaft), (45) DSRK060 03005 FL8 3mm Dia. 




(Kugel), (13) DSOK040 02004 FL8 2mm Dia.Shaft End (Schaft), (50) DSRK060 03005 FL8 3mm Dia. Torus 

/ Corner Radius End (Eckenradius), (1) DSRK060 03002 FL16 3mm Dia. Torus / Corner Radius End 

(Eckenradius) 


(Kugel), (13) DSOK040 02004 FL8 2mm Dia.Shaft End (Schaft), (11) DSRK060 03002 FL6 3mm Dia. Torus 

/ Corner Radius End (Eckenradius), (39) DSRK060 03005 FL8 3mm Dia. Torus / Corner Radius End 




03002 FL16 3mm Dia. Torus / Corner Radius End (Eckenradius), (13) DSRK060 02002 FL12 2mm Dia. 







(Kugel), (50) DSOK050 03004 FL12 3mm Dia.Shaft End (Schaft), (1) DSRK060 03002 FL16 3mm Dia. 


(Eckenradius) 



02002 FL16 2mm Dia. Torus / Corner Radius End (Eckenradius), (1) DSRK060 01502 FL15 1.5mm Dia. 













/ Corner Radius End (Eckenradius), (1) DSRK060 01502 FL15 1.5mm Dia. Torus / Corner Radius End 

(Eckenradius) 

- 29 -

566 

567 

568 

569 

570 

571 

572 

573 

574 

575 

576 

577 

578 

579 

580 



03002 FL20 3mm Dia. Torus / Corner Radius End (Eckenradius), (1) DSRK060 01502 FL151.5mm Dia. 





Torus / Corner Radius End (Eckenradius), (1) DSRK060 01502 FL15 1.5mm Dia. Torus / Corner Radius End 

(Eckenradius) 


(Kugel), (50) DSGM040 00402 FL1 .4mm Dia. Ball Nose End (Kugel), (13) DSOL060 02004 FL20 2mm 

Dia.Shaft End (Schaft), (1) DSRK060 01502 FL15 1.5mm Dia. Torus / Corner Radius End (Eckenradius) 


(Kugel), (14) DSGL070 04002 FL35 4mm Dia. Ball Nose End (Kugel), (55) DSGM040 00402 FL1 .4mm Dia. 

Ball Nose End (Kugel), (13) DSOL060 02004 FL20 2mm Dia.Shaft End (Schaft), (1) DSRK060 01502 FL15 






(Eckenradius) 


(Kugel), (50) DSGM040 00402 FL1 .4mm Dia. Ball Nose End (Kugel), (13) DSRM090 10005 FL55 10mm 

Dia. Torus / Corner Radius End (Eckenradius), (14) DSRM070 08005 FL35 8mm Dia. Torus / Corner Radius 

End (Eckenradius), (1) DSRK060 01502 FL15 1.5mm Dia. Torus / Corner Radius End (Eckenradius) 


(Kugel), (49) DSGM040 00402 FL1 .4mm Dia. Ball Nose End (Kugel), (14) DSOL070 03004 FL30 3mm 

Dia.Shaft End (Schaft), (13) DSRM090 10005 FL55 10mm Dia. Torus / Corner Radius End (Eckenradius), 

(1) DSRK060 02002 FL12 2mm Dia. Torus / Corner Radius End (Eckenradius) 


(Kugel), (5) DSOK050 03004 FL12 3mm Dia.Shaft End (Schaft), (13) DSRM090 10005 FL55 10mm Dia. 

Torus / Corner Radius End (Eckenradius), (4) DSRM070 06005 FL40 6mm Dia. Torus / Corner Radius End 

(Eckenradius), (4) DSRM060 06005 FL20 6mm Dia. Torus / Corner Radius End (Eckenradius), (37) 

DSRK060 04005 FL10 4mm Dia. Torus / Corner Radius End (Eckenradius), (1) DSRK060 02002 FL12 2mm 


[Total 114] Wedco Diamond Milling Cutters including: (28) DSGK070 06002 FL206mm Dia. Ball Nose End 

(Kugel), (60) DSGM040 00302 FL3 .3mm Dia. Ball Nose End (Kugel), (2) DSRM090 08005 FL55 8mm Dia. 


(Eckenradius), (4) DSRK070 04002 FL30 4mm Dia. Torus / Corner Radius End (Eckenradius), (1) DSRK060 

02002 FL12 2mm Dia. Torus / Corner Radius End (Eckenradius), (13) DSRM090 08005 FL55 .8mm Dia. 



(Kugel), (14) DSGM040 00402 FL1 .4mm Dia. Ball Nose End (Kugel), (16) DSOK070 10004 FL35 10mm 

Dia.Shaft End (Schaft), (32) DSRK060 04005 FL10 4mm Dia. Torus / Corner Radius End (Eckenradius), (1) 

DSRK060 02002 FL12 2mm Dia. Torus / Corner Radius End (Eckenradius), (13) DSRM090 08005 FL55 



(Kugel), (9) DSOL090 10004 FL55 10mm Dia.Shaft End (Schaft), (42) DSRM090 10005 FL55 10mm Dia. 


(Eckenradius), (2) DSRM060 06005 FL20 6mm Dia. Torus / Corner Radius End (Eckenradius), (1) 




(Kugel), (50) DSGM040 00502 FL2 .5mm Dia. Ball Nose End (Kugel), (13) DGSM040 00402 FL1 .4mm Dia. 

Ball Nose End (Kugel), (1) DSRK060 02002 FL12 2mm Dia. Torus / Corner Radius End (Eckenradius) 



Ball Nose End (Kugel), (13) DGSM040 00402 FL1 .4mm Dia. Ball Nose End (Kugel), (1) DSRK060 02002 



(Kugel), (50) DSGM040 00502 FL4 .5mm Dia. Ball Nose End (Kugel), (13) dsgm040 00402 fl3 .4mm Dia. 


[Total 114] Wedco Diamond Milling Cutters including: (13) dsgk060 03002 fl10 3mm Dia. Ball Nose End 

(Kugel), (50) DSGK060 02002 FL10 2mm Dia. Ball Nose End (Kugel), (50) DSGM040 00502 FL4 .5mm Dia. 


- 30 -

581 

582 

583 

584 

585 

586 

587 

588 

589 

590 

591 

592 

593 

594 

595 

596 

597 

[Total 114] Wedco Diamond Milling Cutters including: (13) dsgk060 03002 fl10 3mm Dia. Ball Nose End 

(Kugel), (50) DSGK060 02002 FL10 2mm Dia. Ball Nose End (Kugel), (50) DSGM040 00302 FL1 .3mm 

Dia. Ball Nose End (Kugel), (1) DSRK060 02002 FL12 2mm Dia. Torus / Corner Radius End (Eckenradius) 



Ball Nose End (Kugel), (1) DSRM090 10005 FL55 10mm Dia. Torus / Corner Radius End (Eckenradius), 

(13) DSRX050 00501 FL3 .5mm Dia. Torus / Corner Radius End (Eckenradius) 




(Eckenradius) 




(Eckenradius) 












(Eckenradius) 











03002 FL12 3mm Dia. Torus / Corner Radius End (Eckenradius), (50) DSRK060 02015 FL20 DSRK060 










(Kugel), (50) DSGM040 00402 FL2 .4mm Dia. Ball Nose End (Kugel), (13) DSRK060 03002 FL16 3mm Dia. 


(Eckenradius) 


(Kugel), (50) DSGM040 00402 FL2 .4mm Dia. Ball Nose End (Kugel), (13) DSRK060 03002 FL16 3mm Dia. 


(Eckenradius) 







Ball Nose End (Kugel), (50) DSGM040 00502 FL2 .5mm Dia. Ball Nose End (Kugel) 



Ball Nose End (Kugel), (6) DSGK060 01502 FL20 1.5mm Dia. Ball Nose End (Kugel), (49) DSGM040 00402 

FL3 .4mm Dia. Ball Nose End (Kugel) 

- 31 -

598 

599 

600 

601 

602 

603 

604 

605 

606 

607 

608 

609 

610 


(Kugel), (1) DSGK060 02002 FL20 2mm Dia. Ball Nose End (Kugel), (50) 1.5mm Dia. Ball Nose End 

(Kugel), (13) DSGM040 00502 FL2 DSGK060 01502 FL8 .5mm Dia. Ball Nose End (Kugel), (27) DSGM040 

00402 FL2 .4mm Dia. Ball Nose End (Kugel), (9) DSRK060 02015 FL20 2mm Dia. Torus / Corner Radius 

End (Eckenradius), (1) DSRX050 00501 FL4 .5mm Dia. Torus / Corner Radius End (Eckenradius) 



Ball Nose End (Kugel), (20) DSOK040 02004 FL8 2mm Dia.Shaft End (Schaft), (30) DSOK040 02004 FL12 

2mm Dia.Shaft End (Schaft) 


(Kugel), (1) DSGK060 02002 FL20 2mm Dia. Ball Nose End (Kugel), (50) DSGK060 01502 FL8 1.5mm Dia. 

Ball Nose End (Kugel), (50) DSGM040 00502 FL6 .5mm Dia. Ball Nose End (Kugel), 


(Kugel), (1) DSGK060 02002 FL20 2mm Dia. Ball Nose End (Kugel), (50) DSGK060 01502 FL8 1.5mm Dia. 

Ball Nose End (Kugel), (50) DSGM040 00502 FL6 .5mm Dia. Ball Nose End (Kugel) 


(Kugel), (50) DSGK060 01502 FL8 1.5mm Dia. Ball Nose End (Kugel), (12) DSGK060 01502 FL16 1.5mm 

Dia. Ball Nose End (Kugel), (50) DSGM040 00502 FL6 .5mm Dia. Ball Nose End (Kugel), (1) DSRM090 

08005 FL55 .8mm Dia. Torus / Corner Radius End (Eckenradius) 




FL2 .4mm Dia. Ball Nose End (Kugel), (2) DSGM040 00402 FL1 .4mm Dia. Ball Nose End (Kugel), (11) 

DSOL070 03004 FL30 3mm Dia.Shaft End (Schaft), (1) DSRK060 02002 FL20 2mm Dia. Torus / Corner 

Radius End (Eckenradius), (2) DSRK060 01502 FL8 1.5mm Dia. Torus / Corner Radius End (Eckenradius), 

(1) DSRM090 08005 FL55 .8mm Dia. Torus / Corner Radius End (Eckenradius) 


(Kugel), (2) dsgk060 03002 fl10 3mm Dia. Ball Nose End (Kugel), (50) DSGK060 01502 FL8 1.5mm Dia. 

Ball Nose End (Kugel), (50) DSGM040 00302 FL2 .3mm Dia. Ball Nose End (Kugel), (1) DSRM090 08005 



(Kugel), (2) dsgm040 00402 fl3 .4mm Dia. Ball Nose End (Kugel), (16) DSOK040 02004 FL8 2mm 

Dia.Shaft End (Schaft), (34) DSOL060 02004 FL20 2mm Dia.Shaft End (Schaft), (11) DSRK060 01502 FL12 

1.5mm Dia. Torus / Corner Radius End (Eckenradius), (1) DSRM090 08005 FL55 .8mm Dia. Torus / Corner 








(Kugel), (50) DSGK060 01502 FL8 1.5mm Dia. Ball Nose End (Kugel), (6) DSGM040 00502 FL6 .5mm Dia. 


FL2 .4mm Dia. Ball Nose End (Kugel), (11) DSOK040 02004 FL8 2mm Dia.Shaft End (Schaft), (36) 

DSRX050 05005 FL3 5mm Dia. Torus / Corner Radius End (Eckenradius), (1) DSRM090 08005 FL55 .8mm 




Ball Nose End (Kugel), (42) DSGM040 00802 FL8 .8mm Dia. Ball Nose End (Kugel), (4) DSOL060 02004 

FL16 2mm Dia.Shaft End (Schaft), (32) DSRK060 02015 FL20 2mm Dia. Torus / Corner Radius End 

(Eckenradius), (2) DSRK060 02002 FL16 2mm Dia. Torus / Corner Radius End (Eckenradius), (2) DSRK060 


Torus / Corner Radius End (Eckenradius), (1) DSRM090 08005 FL55 .8mm Dia. Torus / Corner Radius End 

(Eckenradius) 



Dia. Ball Nose End (Kugel), (50) DSGM040 00402 FL1 .4mm Dia. Ball Nose End (Kugel), (3) DSRM040 

00802 FL6 8.8mm Dia. Torus / Corner Radius End (Eckenradius), (1) DSRM090 08005 FL55 .8mm Dia. 




Dia. Ball Nose End (Kugel), (27) DSGM040 00802 FL8 .8mm Dia. Ball Nose End (Kugel), (3) dsrm090 

08005 fl50 8mm Dia. Torus / Corner Radius End (Eckenradius), (1) DSRM090 08005 FL55 .8mm Dia. Torus 


- 32 -

611 

612 

613 

614 

615 

616 

617 

618 

619 

620 

621 

[Total 114] Wedco Diamond Milling Cutters including: (10) DSOK040 02004 FL12 2mm Dia. Ball Nose End 

(Kugel), (50) DSGK060 01502 FL6 1.5mm Dia. Ball Nose End (Kugel), (10) DSGL064 01002 FL4 1mm Dia. 


FL2 .5mm Dia. Ball Nose End (Kugel) 


(Kugel), (72) DSGK060 01502 FL8 1.5mm Dia. Ball Nose End (Kugel), (10) DSGM040 00802 FL8 .8mm 

Dia. Ball Nose End (Kugel), (2) DOSK040 02004 FL8 2mm Dia.Shaft End (Schaft), (4) DSOK040 02004 

FL12 2mm Dia.Shaft End (Schaft), (13) DSRK060 01502 FL8 1.5mm Dia. Torus / Corner Radius End 

(Eckenradius), (8) DSRX050 00801 FL6 .8mm Dia. Torus / Corner Radius End (Eckenradius) 



Ball Nose End (Kugel), (15) DSGM040 00402 FL2 .4mm Dia. Ball Nose End (Kugel), (18) DSRX050 00801 




Dia. Ball Nose End (Kugel), (50) DSGM040 00802 FL4 .8mm Dia. Ball Nose End (Kugel), (11) DSOK060 

03004 FL20 3mm Dia.Shaft End (Schaft) 


(Kugel), (7) DSGK060 01502 FL16 1.5mm Dia. Ball Nose End (Kugel), (16) DSGK060 01002 FL12 1mm 

Dia. Ball Nose End (Kugel), (24) DSGM040 00802 FL4 .8mm Dia. Ball Nose End (Kugel), (18) DSGM040 

00802 FL8 .8mm Dia. Ball Nose End (Kugel), (10) DSGM040 00302 FL2 .3mm Dia. Ball Nose End (Kugel), 

(2) DSGM040 00302 FL2 .3mm Dia. Ball Nose End (Kugel), (2) DSRK060 02002 FL6 2mm Dia. Torus / 

Corner Radius End (Eckenradius), (14) DSRK060 01502 FL12 1.5mm Dia. Torus / Corner Radius End 

(Eckenradius), (9) DSRX050 00801 FL8 .8mm Dia. Torus / Corner Radius End (Eckenradius) 



Dia. Ball Nose End (Kugel), (13) DSGK050 01002 FL4 1mm Dia. Ball Nose End (Kugel), (1) DSGK060 

01002 FL10 1mm Dia. Ball Nose End (Kugel), DSGM040 00802 FL8 .8mm Dia. Ball Nose End (Kugel), (6) 

DSGM040 00502 FL2 .5mm Dia. Ball Nose End (Kugel), (2) DSGM040 00502 FL6 .5mm Dia. Ball Nose End 



FL20 4mm Dia. Torus / Corner Radius End (Eckenradius), (2) DSRM080 04005 FL15 4mm Dia. Torus / 

Corner Radius End (Eckenradius), (22) DSRK060 02015 FL20 2mm Dia. Torus / Corner Radius End 

(Eckenradius), (1) DSRX050 00801 FL4 .8mm Dia. Torus / Corner Radius End (Eckenradius), (2) DSRX050 

00501 FL3 .5mm Dia. Torus / Corner Radius End (Eckenradius) 



Ball Nose End (Kugel), (1) dsgm040 00402 fl2 .4mm Dia. Ball Nose End (Kugel), (5) DSGM040 00302 FL2 

.3mm Dia. Ball Nose End (Kugel), (5) DSRM090 08002 FL35 8mm Dia. Torus / Corner Radius End 

(Eckenradius), (6) DSRK070 04002 FL30 4mm Dia. Torus / Corner Radius End (Eckenradius), (15) 

DSRK060 02015 FL20 2mm Dia. Torus / Corner Radius End (Eckenradius), (8) DSRX060 0215 FL20 2mm 




Ball Nose End (Kugel), (28) DSGK050 01002 FL4 1mm Dia. Ball Nose End (Kugel), (15) DSRK060 03002 

FL6 3mm Dia. Torus / Corner Radius End (Eckenradius), (50) DSRK060 02002 FL6 2mm Dia. Torus / 





DSRX050 00505 FL4 .5mm Dia. Torus / Corner Radius End (Eckenradius) 


(Kugel), (1) dsgm040 00402 fl2 .4mm Dia. Ball Nose End (Kugel), (2) dsgm040 00402 fl2 .4mm Dia. Ball 

Nose End (Kugel), (8) DSOL060 02004 FL16 2mm Dia.Shaft End (Schaft), (50) DSOK040 01004 FL8 1mm 

Dia.Shaft End (Schaft), (5) DSRX050 00501 FL4 .5mm Dia. Torus / Corner Radius End (Eckenradius), (40) 

DSRX050 00501 FL6 .5mm Dia. Torus / Corner Radius End (Eckenradius) 



Ball Nose End (Kugel), (20) DSGM040 00302 FL1 .3mm Dia. Ball Nose End (Kugel), (36) DSRX050 00801 

FL4 .8mm Dia. Torus / Corner Radius End (Eckenradius), (5) DSRX050 00501 FL3 .5mm Dia. Torus / 


- 33 -

622 

623 

624 

625 

626 

627 


(Kugel), (8) dsgk060 03002 fl20 3mm Dia. Ball Nose End (Kugel), (49) DSOK070 10004 FL35 1mm 

Dia.Shaft End (Schaft), (8) DSGM040 00502 FL6 .5mm Dia. Ball Nose End (Kugel), (8) DSRK060 03002 

FL20 3mm Dia. Torus / Corner Radius End (Eckenradius), (5) DSRK060 01502 FL4 1.5mm Dia. Torus / 

Corner Radius End (Eckenradius), (23) DSOL060 01004 FL10 1mm Dia.Shaft End (Schaft) 


(Kugel), (5) DSGML050 00502 FL3 .5mm Dia. Ball Nose End (Kugel), (30) DSGM040 00302 FL3 .3mm Dia. 

Ball Nose End (Kugel), (32) DSOL060 01004 FL10 1mm Dia.Shaft End (Schaft), (39) DSOL060 01004 FL14 

1mm Dia.Shaft End (Schaft) 



Ball Nose End (Kugel), (16) DSOL060 01004 FL14 1mm Dia.Shaft End (Schaft), (47) DSOL090 01004 FL55 

1mm Dia.Shaft End (Schaft), (25) DSRK060 01002 FL10 1mm Dia. Torus / Corner Radius End 

(Eckenradius) 

[Total 114] Wedco Diamond Milling Cutters including: (6) dsgm040 00502 fl4 .5mm Dia. Ball Nose End 

(Kugel), (44) DSOK050 03004 FL12 3mm Dia.Shaft End (Schaft), (64) DSRM070 10005 FL35 10mm Dia. 


[Total 114] Wedco Diamond Milling Cutters including: (6) DSOK040 02004 FL12 2mm Dia.Shaft End (Schaft), 

(50) DSRK060 01002 FL8 1mm Dia. Torus / Corner Radius End (Eckenradius), (16) DSRK060 01502 FL4 

1.5mm Dia. Torus / Corner Radius End (Eckenradius), (42) DSRK060 01002 FL6 1mm Dia. Torus / Corner 




Ball Nose End (Kugel), (5) DSGL090 01502 FL20 1.5mm Dia. Ball Nose End (Kugel), (4) DSGK060 01502 

FL10 1.5mm Dia. Ball Nose End (Kugel), (2) DSGK060 01502 FL12 1.5mm Dia. Ball Nose End (Kugel), (7) 

DSGK060 01502 FL16 1.5mm Dia. Ball N (8) DSGK050 01502 FL10 1.5mm Dia. Ball Nose End (Kugel), (6) 

dsgm040 00402 fl1 .4mm Dia. Ball Nose End (Kugel), (1) DSOK040 02004 FL12 2mm Dia.Shaft End 

(Schaft), (10) DSRM060 06005 FL20 6mm Dia. Torus / Corner Radius End (Eckenradius), (2) DSRK060 



(Eckenradius), (35) DSRX050 00801 FL6 .8mm Dia. Torus / Corner Radius End (Eckenradius), (7) 

DSRX050 00801 FL8 .8mm Dia. Torus / Corner Radius End (Eckenradius)ose End (Kugel), 



Ball Nose End (Kugel), (25) DSGK050 01502 FL10 1.5mm Dia. Ball Nose End (Kugel), (7) DSGK060 01502 

FL16 1.5mm Dia. Ball Nose End (Kugel), (4) DSGM040 00502 FL2 .5mm Dia. Ball Nose End (Kugel), (5) 

DSGM040 00402 FL2 .4mm Dia. Ball Nose End (Kugel), (17) DSOK060 03004 FL20 3mm Dia.Shaft End 

(Schaft), (3) DSOL060 02004 FL20 2mm Dia.Shaft End (Schaft), (3) DSOL060 02004 FL16 2mm Dia.Shaft 

End (Schaft), (4) DSRM070 06005 FL40 6mm Dia. Torus / Corner Radius End (Eckenradius), (16) 

DSRK060 04002 FL20 4mm Dia. Torus / Corner Radius End (Eckenradius), (10) DSRK060 01502 FL8 


628 

629 Blank Lot 

2005 Diebold Thermogrip Toolsetting System with ISG2200.01 Induction Heating Unit and FKS 03 Release 

630 Unit 

631 Diebold SK40 Test Arbor & Torque Meter – Toyoda 

632 Diebold SK40 Test Arbor & Torque Meter – Roeders 

633 Diebold HSK32 Test Arbor & Torque Meter – Makino 

634 2005 Zoller Model Venturion 4002-00580, s/n EN-61010-1 Tool Presetter 

635 Blank Lot 

636 Blank Lot 

637 Blank Lot 

638 Blank Lot 

639 [Total 750] Graphite Electrodes including: (150) R025/2565, (150) R025/2585 & (450) F025/2585 

640 [Total 800] Graphite Electrodes including: (300) F040/4065 & (500) R040/4065 

641 [Total 900] F040/4065 Graphite Electrodes 

642 [Total 850] F040/4085 Graphite Electrodes 

643 [Total 650] R040/4085 Graphite Electrodes 

[Total [890] Graphite Electrodes including: (102) F050/3070, (95) R050/3070, (251) F050/3040, (200) 

644 F050/5040 & (242) R050/5040 


- 34 -

[Total [788] Graphite Electrodes including: (368) F060/3040, (121) R060/3040, (100) F060/3050, (54) 

646 R060/3050, (48) F060/3060, (29) R060/3060 & (68) R060/4040 

647 [Total [757] Graphite Electrodes including: (484) F060/4040 & (273) R060/4040 

648 [Total [735] Graphite Electrodes including: (52) R060/4050, (210) R060/5040 & (473) F060/5040 

[Total 844] Graphite Electrodes including: (80) F060/5060, (50) R060/5060, (78) F060/3050, (54) R060/3050, 

649 (145) R065/2525, (216) F065/4040 & (221) R065/4040 


[Total 892] Graphite Electrodes including: (417) F080/3040, (59) R080/3040, (230) F080/4040 & (186) 

651 R080/4040 

[Total 867] Graphite Electrodes including: (450) F080/4040, (250) R080/4040, (119) F080/3050 & (48) 

652 R080/3050 

[Total 852] Graphite Electrodes including: (434) F080/5040, (52) R080/5040, (155) R080/6040 & (211) 

653 F080/6040 

[Total 849] Graphite Electrodes including: (278) F080/6040, (224) R080/6040, (68) F080/6060, (37) 

654 R080/6060, (116) R080/8040 & (126)F080/8040 


655 R085/2525, (179) F085/4040 & (279) R085/4040 


656 R100/3040, (197) F100/4040, (101) R100/4040, (83) R100/5040, (106) F100/5040 & (163) F100/6040 

[Total 912] Graphite Electrodes including: (123) F100/8040 , (68) R100/8040, (60) F100/8060, (30) 

R100/8060, (60) F120/3050, (20) R120/3050, (68) F120/4030, (176) F120/3040, (74) R120/3040, (102) 

657 F120/4040, (55) R120/4040, (55) R120/5040 & (21) R120/6040 

[Total 764] Graphite Electrodes including: (35) F120/5060, (30) R120/5060, (28) F120/6060, (9)R120/6060, 

(24) F120/8040, (63) R120/8040, (85)F140/3040, (45) R140/3040, (60) F140/3050, (50) R140/3050, (78) 

F140/4040, (73) R140/4040, (34) F140/6040, (14) R140/6040, (16) F140/8040, (4) R140/8040, (30) 

658 F150/8060, (10) R150/8060, (30) F160/8040, (20) R160/8040, (21) F160/8060 & (5) R160/8060 

COMPLETE CELL LOTS 660- 667 INCLUDING (6) 2005 MAKINO MODEL EDNC 43-MR, CNC SINK 

EROSION MACHINES, 2005 FANUC MODEL R-2000IA/165 ROBOT, FANUC MODEL R-J3IB 

CONTROLLER & 7TH. AXIS HORIZONTAL TRANSFER & EROWA AUTOMATION. FOOTPRINT 18.4 X 

659 8.3M. 

2005 Makino Model EDNC 43-MR, CNC Sink Erosion Machine with Integrated C Axis, MGH 20-60A 60 

Amp Generator, 700 x 500mm 'T' Slotted Worktable, X Axis 450mm, Y Axis 350mm, Z Axis 350mm, 

Work Tank W850mm x D650mm x H400mm, Max Fluid Height 350mm,2003 Makino MGH III CNC 

Controls, Buscher Compri HX Heat Exchanger Power Hours 12,084, Working Hours 1,592 s/no. 

660 80.4055.0123. 




661 Controls, Buscher Compri HX Heat Exchanger s/no. 80.4055.0124. 




662 Controls, Buscher Compri HX Heat Exchanger s/no. 80.4055.0125. 




Controls, Buscher Compri HX Heat Exchanger, Power Hours 12,062, Working Hours 558 s/no. 

663 80.4055.0126. 





664 80.4055.0127. 





665 80.4055.0128. 

2005 Fanuc Model R-2000iA/165 Robot, Fanuc Model R-J3iB Controller, s/n E05406460, w/ Teach 

666 Pendant & 7th. Axis Horizontal Transfer 

2005 Erowa Automation System Including (3) Magazine Carousels, Shelves, Cage, Control Cabinet, 

667 Wiring & Erowa Lift 2 & Chilled Water Distribution Pipework Within Cell 

- 35 -

668 

669 

670 

Complete Cell Lots 669 - 674 Including (4) 2005 Makino Model EDNC 43-MR, CNC Sink Erosion 

Machines, 2005 Fanuc Model R-2000iA/165 Robot, Fanuc Model R-J3iB Controller & 7th. Axis 

Horizontal Transfer & Erowa Automation. Footprint 18.4 x 8.3m. 





80.4055.0119. 





80.4055.0120. 





671 80.4055.0121. 





672 80.4055.0122. 

673 2005 Fanuc Robot Model R-2000iA/165F w/ Fanuc Model R-J3iB Controller, s/n E05408633 

2005 Erowa Automation System Including (2) Magazine Carousels, Shelves, Cage, Control Cabinet, 

674 Wiring & Erowa Lift 2 & Chilled Water Distribution Pipework Within Cell 

675 Paper Filter DF-2, Part No. EDF-2629 For Makino Model EDNC 43-MR 

676 Drive Unit MR-J2S-60B-PY135, Part No. Z512C0110200 For Makino Model EDNC 43-MR 

677 Drive Unit MR-J2S-60B-PY135, Part No. Z512C0110200 For Makino Model EDNC 43-MR 

678 Drive Unit MR-JS-200B, Part No. Z512C0110310 For Makino Model EDNC 43-MR 

679 Drive Unit MR-J2S-40B (Z512C0110190), Part No. Y000X4060192 For Makino Model EDNC 43-MR 

680 MVB 9 Modul, Part No. 4ER140A001 For Makino Model EDNC 43-MR 

681 EHV2-EN Unit, Part No. Z551D0232067 For Makino Model EDNC 43-MR 

682 EHV2-EN Unit, Part No. Z551D0232067 For Makino Model EDNC 43-MR 

683 ELV2A Unit, Part No. 1ER104A001 For Makino Model EDNC 43-MR 

684 MR-Head with EROWA ITS incl. Motor Z, Part No. 17ED15A-SET For Makino Model EDNC 43-MR 

685 Linear Scale Y, Part No. Z313L1040019 For Makino Model EDNC 43-MR 

686 Linear Scale Z, Part No. Z313L1040022 For Makino Model EDNC 43-MR 

687 VPSA-Power supply, Part No. Z551D0033003 For Makino Model EDNC 43-MR 

688 ECC5 card, Part No. 1ER59A001 For Makino Model EDNC 43-MR 

689 Linear Scale X, Part No. Z313L1050011 For Makino Model EDNC 43-MR 

690 Miscellaneous Spares For Makino Model EDNC 43-MR 

COMPLETE CELL, LOTS 692 - 703 INCLUDING (8) AGIECUT CHALLENGE 2 CNC WIRE EROSION 

MACHINES, (2) HEUN MODEL APOS 600, CNC HIGH-SPEED PRECISION ELECTRICAL DISCHARGE 

PILOT HOLE DRILLING MACHINES, 2005 FANUC ROBOT MODEL R-2000IA/165F W/ FANUC MODEL 

R-J3IB CONTROLLER WITH 7TH AXIS HORIZONTAL TRANSFER, 2005 EROWA AUTOMATION 

SYSTEM CONSISTING OF (2) MAGAZINE CAROUSELS, SHELVES, CAGE, CONTROLS, WIRING & 

691 EROWA LIFT 2. FOOTPRINT 23.4M X 8.8M. 

2005 Agie Model Agiecut Challenge 2, CNC Wire Erosion Machine w/ Agie Vision CNC Control, X Axis 

350mm, Y Axis 250mm, Z Axis 256mm, U/V + - 70mm, PSW NRT Spec. Clamping Base, Agie IPG 

Generator, Agieconic Plus, Agiecut Size 2 Automation, Robot Command, Host Control, 1mm Wire 

692 Thread Nozzle For 0.1 - 0.25mm Wires, 400V/50Hz, Power Hours 12,326, Working Hours 2,519 s/n 440 




693 Thread Nozzle For 0.1 - 0.25mm Wires, 400V/50Hz. Power Hours 13,148, Working Hours 2,104 s/n 442 




694 Thread Nozzle For 0.1 - 0.25mm Wires, 400V/50Hz. Power Hours 13,211 Working Hours 2,524 s/n 445 

- 36 -

695 

696 

697 

698 

699 




Thread Nozzle For 0.1 - 0.25mm Wires, 400V/50Hz. Power Hours 11,602, Working Hours 2,377 s/n 449 




















700 6004000 412 129 




701 6004000 412 130 

702 2005 Fanuc Robot Model R-2000iA/165F w/ Fanuc Model R-J3iB Controller, s/n E05406461 

2005 Erowa Automation System Consisting of (2) Magazine Carousels, Shelves, Cage, Controls, 

Wiring, Erowa Lift 2 

703 

704 Blank Lot 

705 Pump M2 R AC 2/3 (PV 4.2.23 RE), Part No. 002.624, For Agie Model Agiecut Challenge 2. 

KIT Bath Level Assy AC 2/3 Badniveau-Einheit, Part No. 004.454 and Print.Circ.Board ADC-18, Part No. 

706 630.652, For Agie Model Agiecut Challenge 2. 

707 PC Comp.Board FAB586-2G Agie Config., Part No. 027.974, For Agie Model Agiecut Challenge 2. 

708 Pump M1/M4 50Hz with packing, Part No. 030.344, For Agie Model Agiecut Challenge 2. 

709 Print.Circ.Board LPS-27, Part No. 042.114, For Agie Model Agiecut Challenge 2. 

710 Elektrode cable , Part No. 166.751, For Agie Model Agiecut Challenge 2. 

711 Motor M10+M13, Part No. 243.793, For Agie Model Agiecut Challenge 2. 

712 Motor M12 complete with cables, Part No.259.883, For Agie Model Agiecut Challenge 2. 

713 Motor M12 complete with cables, Part No.259.883 , For Agie Model Agiecut Challenge 2. 

714 Motor with pinion X,Y No.262.233, For Agie Model Agiecut Challenge 2. 

715 Print.Circ.Board HPS-12, Part No. 617.620, For Agie Model Agiecut Challenge 2. 

716 Print.Circ.Board IOB-03, Part No. 624.981, For Agie Model Agiecut Challenge 2. 

717 Print.Circ.Board IMC-09, Part No. 625.241, For Agie Model Agiecut Challenge 2. 

718 Print.Circ.Board DMD-14 + PMO-17, Part No. 690.254, For Agie Model Agiecut Challenge 2. 

719 Print.Circ.Board DMD-14 + PMO-22, Part No.690.264 , For Agie Model Agiecut Challenge 2. 

720 Print.Circ.Board PSC-04, Part No. 690.644, For Agie Model Agiecut Challenge 2. 

721 Print.Circ.Board PEC-05, Part No. 690.824, For Agie Model Agiecut Challenge 2. 

722 Print.Circ.Board DBE-10, Part No. 695.034, For Agie Model Agiecut Challenge 2. 

723 Pneumatic Cylinder without rod, Part No. 701.277, For Agie Model Agiecut Challenge 2. 

724 Print.Circ.Board PMO-05 + AUX-88, Part No. 721.501, For Agie Model Agiecut Challenge 2. 

725 Console basic Agievision 2000, Part No. 743.522, For Agie Model Agiecut Challenge 2. 

726 Print.Circ.Board IMC-09 + PEC-08, Part No. 843.544, For Agie Model Agiecut Challenge 2. 

727 Printed plate ADC-20 + AUX-85, Part No. 698.044, For Agie Model Agiecut Challenge 2. 

728 Elektrode cable, Part No. 166.761, For Agie Model Agiecut Challenge 2. 

- 37 -

729 Divert Box, Part No. 172.652, For Agie Model Agiecut Challenge 2. 

730 Toroide, Part No. 272.613, For Agie Model Agiecut Challenge 2. 

731 Toroide, Part No. 272.613, For Agie Model Agiecut Challenge 2. 

732 Miscellaneous Spares For Agie Model Agiecut Challenge 2. 

733 Blank Lot 

734 Glass Measuring Scale X-Axis ML 620For Heun Model APOS 600. 

735 Glass Measuring Scale X-Axis ML 420 For Heun Model APOS 600. 

736 Keyboard For Heun Model APOS 600. 

737 Miscellaneous Spares For Heun Model APOS 600. 

738 Five Packs Agie Bedra 16 CCA200 Wire For Agie Model Agiecut Challenge 2. 

739 Nine Packs Agie Bedra 16 CCA250 Wire For Agie Model Agiecut Challenge 2. 

740 Approximately 200 Various Electrodes For Heun Model APOS 600. 0.5 - 3mm 

741 Blank Lot 

742 Blank Lot 

743 Blank Lot 

744 Blank Lot 

745 Erowa Automation Tooling ER-032035 



748 Erowa Automation Tooling ER-008638, ER-010562 

749 Blank Lot 

120. - (20 x 6 Packs) Erowa ER-044648 72mm Dia Uniplate, ITS Standard Electrode Holders. 2 Hole, Axial 

750 Distance 72mm (Boxed/Unused) 



































- 38 -

768 

769 

770 

771 

772 

773 

774 

775 

776 

777 

778 

779 

780 

781 

782 

783 

784 

785 

786 

787 

788 

789 

790 

791 

792 

793 

794 

795 

796 

797 

798 

799 


Distance 72mm (Boxed/Unused) 


Distance 72mm (Boxed/Unused) 


Distance 72mm (Used) 













































311 - (48 x 6 Packs) Erowa ER-044648 72mm Dia Uniplate, ITS Standard Electrode Holders. 2 Hole, Axial 


311 - (48 x 6 Packs) Erowa ER-044648 72mm Dia Uniplate, ITS Standard Electrode Holders. 2 Hole, Axial 


120. - (20 x 6 Packs) Erowa ER-044736 72mm Dia Uniplate, ITS Standard Electrode Holders, 25 x 25mm 

(Used) 


(Used) 


(Used) 


(Used) 


(Used) 

- 39 -


800 (Used) 


801 (Used) 


802 (Used) 


803 (Used) 


804 (Used) 


805 (Used) 


806 (Used) 


807 (Used) 


808 (Used) 


809 (Used) 


810 (Used) 


811 (Used) 

185. - (30 x 6 Packs + 5) Erowa ER-044736 72mm Dia Uniplate, ITS Standard Electrode Holders, 25 x 

812 25mm (Used) 


813 (Used) 


814 (Used) 

101. - (16 x 6 Packs + 5) Erowa ER-044750 72mm Dia Uniplate, ITS Standard Electrode Holders, 15 x 

815 15mm (Used) 

816 Twenty Five Erowa ER-044690 148mm Dia. ITS Standard Pallets (Unused) 














830 Forty-Nine Erowa ER-044690 148mm Dia. ITS Standard Pallets (Used) 

831 120. Erowa ER-044690 148mm Dia. ITS Standard Pallets (Used) 





Four Erowa ER-043857 148mm Dia. ITS Standard Workholder Pallets For Roeders / Makino Machines 

836 (Used) 


837 (Used) 


838 (Used) 

- 40 -


839 (Used) 


840 (Used) 

Thirty-three Erowa ER-045339 72mm Dia. ITS Standard Workholder Pallets For Roeders / Makino / Agie 

841 Machines (Used) 

Forty-five Erowa ER-045340 72mm Dia. ITS Standard Workholder Pallets For Roeders / Makino / Agie 


Fourteen Erowa ER-043860 72mm Dia. ITS Standard Workholder Pallets For Roeders / Makino / Agie 


844 Ten Erowa ER-043 320mm x 320mm Aluminium Pallets. (One Fitted Magnetic Chuck). 





























873 Twenty-five Erowa ER-043 320mm x 320mm Aluminium Pallets. (Five Fitted Magnetic Chucks). 

874 Five Erowa ER-045343 320mm x 320mm Stainless Steel EDM Pallets. 



Four Erowa ER-045342 320mm x 320mm Stainless Steel Pallets.One Erowa ER-045342 320mm x 320mm 

877 Stainless Steel Pallet 



880 Five Erowa Various 320mm x 320mm Stainless Steel EDM Pallets.D856 

881 Eight Erowa ER-043768 250mm x 290mm Makino EDM Stainless Steel Pallets. 


883 Eight Erowa ER-043755 & ER-043763 250mm x 290mm Makino EDM Stainless Steel Pallets. 



- 41 -



888 Seven Erowa ER-043784 + 2 Similar 250mm x 290mm Makino EDM Stainless Steel Pallets. 

889 Miscellaneous Erowa Spares on a Pallet 

890 Miscellaneous Erowa Spares on a Pallet 

891 Blank Lot 

892 Blank Lot 

893 Blank Lot 

894 Blank Lot 

895 Blank Lot 

896 Blank Lot 

2006 Ecolog Logistiksysteme Automated Storage & Retrieval System, 42 x 4 x 4.5m L x B x H, 3032 

Positions Each Bay 2 x 50 Kg For Use In Conjunction With SSI Schaeffer 600 x 400mm Plastic Tote 

Bins , s/n 3032 w/ TGW Automated Picker, Automated Roller Conveyor, w/ Siemens Simatic OP7 

897 Controls w/ Scanners 

898 Six Special Purpose Trolleys for SSI Schaeffer 600 x 400mm Tote Bins 



901 Lista 3000mm x 800mm Butcher Block Workbench with 3 x Multidrawer base Units & Mains + Air Module. 



























Two Lista 3000mm x 800mm Butcher Block Workbenches with 3 x Multidrawer base Units & Mains + Air 

928 Module. 

929 Lista 3000mm x 800mm Butcher Block Mobile Workbench 

930 Lista 3000mm x 800mm Butcher Block Mobile Workbench 

931 Two Lista 3000mm x 800mm Butcher Block Mobile Workbenches 

932 Blank Lot 

933 Lista 720 x 720 x 1100mm High Multidrawer Tool Cabinet 

- 42 -

934 Lista 720 x 720 x 1100mm High Multidrawer Tool Cabinet 

935 Lista 720 x 750 x 1550mm High 2 Door Tool Cabinet 

936 Lista 720 x 750 x 1550mm High 2 Door Tool Cabinet 

937 Blank Lot 

938 Lista 1000 x 700 x 1000mm High Tool Caddy 



941 Quantity of Lista Inserts & Components on 4 Pallets 

942 Fetra 1400 x 800mm 3 Tier Trolley 



945 Five 1200 x 800mm Trolleys 

946 Eleven Special Purpose Tool Caddies 

947 Ten Paper Roll Carts 

948 Blank Lot 

949 Thirteen Special Purpose Worktables 

950 Lista 570 x 730 x 700mm High Mobile Tool Cabinet 






959 Cast Iron Surface Table, 1500 x 1000mm (Unused) 




964 Six 1000 W x 400mmD x 1500mm H Bays of Adjustable Steel Shelved Storage Racks 

965 Five 1000 W x 400mmD x 1500mm H Bays of Adjustable Steel Shelved Storage Racks 

966 Five 1000 W x 400mmD x 1500mm H Bays of Adjustable Steel Shelved Storage Racks 

967 Four 1000 W x 400mmD x 1500mm H Bays of Adjustable Steel Shelved Storage Racks 



970 Quantity of 1000 W x 400mmD x 1500mm H Bays of Adjustable Steel Shelved Storage Racks (Dismantled) 

2005 Konecranes Overhead Bridge Crane w/ (2) SWL 2-Tonne Top Riding Bridges, Downshop 

975 Runway, 30' Span x 100' Runway. Radio Controlled 

976 Dexion Pallet Racking, Two 2.7m Wide Bays x 2.5M High, 3 Tier. 

977 Allclick Pallet Racking, Four 2.7m Wide Bays x 3.5M High, 3 Tier. 

978 Allclick Pallet Racking, Six 2.7m Wide Bays x 3.5M High, 3 Tier. 

979 Allclick Pallet Racking, Six 2.7m Wide Bays x 3.5M High, 3 Tier. 

980 Allclick Pallet Racking, Four 2.7m Wide Bays x 3.5M High, 3 Tier.+ 2 Bays x 1.8M wide 

- 43 -

PURCHASERS BUYING ORDER(PROXY) 

For the convenience of Buyers who may wish to make purchases, but who do not wish to attend 

the sale, the Auctioneer will arrange to bid on their behalf if the orders are sent in on the subjoined 

form. A prior inspection on the specified View Days is, however, advised. 

The Auctioneers shall not be liable for any neglect, default or failure in executing bids nor any 

liability arising thereto. 

Date .......................June 2007. 

To: Laurie or Kristin at The Branford Group lleach@thebranfordgroup.com or 

kgardner@TheBranfordGroup.com 

Fax to 203-488-4577 please be aware of 

time differences. 

Please bid on our behalf at the below-named sale for any undermentioned lots, at or under the limit 

marked against them.h 

We enclose a cheque for € ............... Euro or wired funds being 25% of the estimated amounts of 

the purchase money, and in event of you buying any lots for us we undertake to pay for, and 

remove, the goods in conformity with the Conditions of Sale and Notice to Purchasers. 

Location Town of Sale 

Vienna - Austria 

Date of Sale 

Wednesday 20 th June 2007 

Lot Description Limit of Price 

This order is given on the understanding that a 15% Buyer's Premium plus Value Added Tax will 

be levied on the "Hammer Price" and will be charged over and above the limit placed by you on 

this order. 

Name ................................................................................. 

Address ................................................................................. 

................................................................................. 

Telephone ........................................ Signature ............................................... 

Fax ……………………………… E-mail: ……………………………......…… 

A MINIMUM BID OF €50 PER LOT WILL ONLY BE ACCEPTED ON THE ABOVE FORM 

- 44 -

NOTES 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

______________________________________ 

- 45 -

Buyers Guide - The Branford Group

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?