radio frequency reed relays

SIP Series
Reed Relay
The SIP series reed relays are available in both voltage and current driven (line sense) versions. The SIP
range requires only half the PCB area of the DIP series.
The construction of the SIP series corresponds to the creepage and clearance requirements of the new
European Standards; EN60950.
CONTACT CONTACT DIAGRAM NOMINAL COIL MUST OPERATE MUST RELEASE MAXIMUM MAXIMUM RATED
FORM TYPE VOLTAGE RESISTANCE VOLTAGE VOLTAGE VOLTAGE VOLTAGE POWER
+/-10% MAXIMUM MINIMUM 20°C 60°C
COIL VDC Ohm VDC VDC VDC VDC mW
01 5 500 3.5 0.75 23 14 50
1A 02 L/M/D/Q 12 1000 8.4 1.8 33 20 144
02
05 L/M/D/Q 15 2000 10.5 2.2 47 29 112
03L 24 2000 16.8 3.6 47 29 288
1A 02 01L M 5H 1000 3.5 0.75 33 20 25
02LM 12H 2000 8.4 1.8 47 29 72
Please note that the 5V types with contact 05 have a reduced coil resistance of 2OO.
CONTACT CONTACT DIAGRAM NOMINAL COIL MUST OPERATE MUST RELEASE MAXIMUM MAXIMUM INDUCTANCE
FORM TYPE VOLTAGE RESISTANCE VOLTAGE VOLTAGE VOLTAGE VOLTAGE AT 1KhZ
+/-10% MAXIMUM MINIMUM 20°C 60°C +/-20%
Line Sense Ohm VDC VDC VDC VDC mH
Relay
1A 11 01M 15 15 5 240 149 3,45
Other coils on request
• Designed to EN60950
• High Sensitivity Coils
up to 2,000 Ohms @
12V
CONFIGURATION
01
PART NUMBERING SYSTEM - SIP SERIES
02 03
• Line Sense Relay
Option available
• Magnetic and Diode
option available
• Insulation Voltage up
to 4.25kVdc
• Variants UL approved
S 12 - 1A 02 01 - L H
Series
Dual in line package (SIP)
Coil Voltage
5V, 12V, 24V
Contact Form
1A
Contact Type
02, 05, 11
SIP-2000UK
High Resistance Version
Options
L : without diode
M : with magnetic screen
01D : Diode on pins 3 & 5,
no magnetic screen
01Q : diode pins 3 & 5,
with magnetic screen
02D : diode pins 2 & 6,
no magnetic screen
02Q : diode pins 2 & 6,
with magnetic screen
Configuration
01, 02, 03
Crydom Magnetics Ltd
7 Cobham Road
Ferndown Industrial Estate
Wimborne
Dorset BH21 7PE
Tel: +44 (0) 1202 897969
Fax: +44 (0) 1202 891918
magnetics@crydom.com
www.crydom.co.uk