Full Line Catalog - Moldex

HEARING & RESPIRATORY PROTECTION

FOCUS 

INNOVATIVE 

Moldex’s expertise is hearing and respiratory protection 

to keep workers safer. This laser like focus results in an 

offering of innovative world class products. 

• Our core products are manufactured in the U.S.A. 

• Moldex is specialized in an age of generalization. 

More Air. More Wear. 

® 

With over 50 patents, Moldex is dedicated to 

developing innovative solutions that address the 

hearing and respiratory needs of industrial and 

healthcare employees. 

Some of our industry leading 

solutions include: 

• Exclusive easy-breathing wave design 

• Less resistance, better breathability 

• Breathes like it has a valve, without one 

• Flex-Fit® comfort waves flex with you 

Dura-Mesh provides bi-directional protection 

from dirt on the outside and 

moisture on the inside 

resulting in masks 

lasting longer, 

reducing usage and 

saving money. 

Up to three distinct sizes in industrial masks and 

five sizes in healthcare to address today’s diverse 

workforce. 

Small 

Medium/Large 

Low Profile 

As no two ear canals are alike, 

Glides unique multi-curved 

stem custom fits, with just a 

push and a twist. 

HandyStrap masks can be 

conveniently stored around 

the neck while on a break, 

keeping them from getting 

prematurely thrown away 

or misplaced. 

1

SOLUTIONS 

A GREENER ALTERNATIVE 

The first disposable, completely 

recyclable earplug dispenser, 

PlugStations hang anywhere 

earplugs are needed to increase 

compliance and reduce waste. 

EZ-ON is the first and only 

single strap respirator 

for workers who prefer 

wearing one strap. 

All Moldex ® products and packaging are PVC-Free. 

A scientific study by Nicholas Anastas, PhD Principal, 

Poseidon's Trident and Matthew Eckelman, MEng Yale 

University, Center for Industrial Ecology, confirms that 

considering the full life cycle of PVC vs. 

Polyurethane and Polypropylene, 

the scientific data supports the 

conclusion that use of Polyurethane 

or Polypropylene are “green” alternatives 

to PVC and are ecologically preferred. Toxic chemicals 

associated with PVC disposal have been linked to a variety 

of health hazards. 

® 

An air pocket in the tip of our 

Rockets reusable earplugs 

provides incomparable comfort. 

The 7000 Series half 

mask respirator 

features fewer parts, 

minimal maintenance, 

and maximum 

comfort. 

The 9000 Series full face respirator’s exclusive 

overmolded technology 

reduces weight, parts, 

maintenance and cost. 

Moldex has taken a leadership position among global PPE 

manufacturers in minimizing our environmental impact. We 

began with the complete elimination of PVC which is linked 

to one of the most environmentally toxic materials in landfill 

disposal and this initiative has now grown into a corporate 

culture that constantly looks to manufacture innovative 

products that minimize environmental impact. 

Green products and packaging 

• Removal of all PVC from our products and packaging. 

• Dura-Mesh ® shell on disposable respirators allows 

fewer respirators to be used and a reduction in the 

waste stream. 

• PlugStation ® , Respirator Lockers ® , and Pocket-Paks ® 

are all recyclable products. 

• Use of recycled paper for all literature and packaging 

throughout the company. 

2

® 

Hard to Wear. 

©Sun Media Corporation 

Our latest ideas that wear well. 

Easy to Wear. 

Let’s face it...some respirators are as comfortable as a 

beard of bees! But now, with the new 7000 half mask and 

9000 full face series, respiratory protection has never felt 

so easy. Unlike others, the 7000/9000 feature lighter weight, 

fewer parts, less maintenance, wider field of vision, easier 

cartridge attachment, and are completely PVC-Free and 

metal-free. All this at an economical price. Compliance just 

got a whole lot easier. 

Sleek, simple, comfortable protection that’s just plain 

EASY TO WEAR. To see what the buzz is 

all about, visit www.moldex.com 

or call (800) 421-0668. 

BREATHING IS NOW A BREEZE 

Introducing AirWave, the next wave in respiratory protection—a 

revolutionary step forward from today’s disposable respirators. Its 

patent pending wave technology allows easier breathing for cool 

comfort, providing the protection you need all day long. Plus, it delivers 

on the Moldex commitment—comfortable, durable respirators that 

increase compliance and decrease costs. 

SIMPLY PUSH & TWIST! 

Since no two ear canals are alike, GLIDE’s unique multi-curved 

stem rotates for a custom fit inside each ear canal. Just push and twist 

to find your fit! 

You’ll instantly feel a comfortable seal...unlike anything you’ve 

felt with an earplug before. 

Offered in disposable Foam and reusable Trio styles. Available 

with or without cord. To find your fit, visit moldex.com/glide or 

call 800-421-0668, x550. 

AirWave is available in a classic 2-strap (4200 series) and also in the 

4600 series which features another Moldex exclusive, the hangable 

® 

and adjustable cloth SmartStrap. To try FREE and receive FREE goods 

with your first order*, please scan box below or go to www.moldex.com/ 

non-product/sample-request-form.php 

GLIDE Foam 

SLC 80 24dB Class 4 

More Air. More Wear. 

3 

*Certain eligibilty requirements apply. To qualify, please fill out form at link 

and check “AirWave with SmartStrap” box at bottom of form. 

Moldex, Ideas that wear well, Dura-Mesh, AirWave, FlexFit, SmartStrap 

and the PVC-Free logo are registered trademarks. 

The mesh design and waved design are trademarks of Moldex-Metric, Inc. 

Patents Pending. ©2012. 

GLIDE Trio 

SLC 80 26dB Class 4 

Moldex and Ideas that wear well are registered trademarks. Glide, find your fit and the bright 

green color are trademarks of Moldex-Metric, Inc. Patents Pending. ©2012 Moldex-Metric, Inc.

® 

TABLE OF CONTENTS 

DISPOSABLE RESPIRATORS 

Pages 5 - 10 

REUSABLE RESPIRATORS 

Pages 11 - 18 

FOAM EARPLUGS 

Pages 19 - 22 

REUSABLE EARPLUGS, 

BANDS & MUFFS 

Pages 23 - 24 

TRAINING, FIT TESTING, SUPPORT 

AND ORDERING INFORMATION 

Pages 25 - 26 

6 

4

DISPOSABLE PARTICULATE RESPIRATORS 

Cool, comfortable, collapse-resistant 

More air. More wear. 

AirWave is the next wave in respiratory 

protection – a revolutionary step forward from 

today’s disposable respirators. Its patent pending 

wave technology allows easier* breathing for 

cool comfort, providing the protection you 

need all day long. Plus, it also delivers on 

the Moldex ® commitment – comfortable, 

durable respirators that increase 

compliance and decrease costs. 

® 

More Air. More Wear 

Breathes easier by design 

AirWave—the valve-free respirator that breathes easier: 

• Less resistance than other leading disposable respirators* 

• Even less exhale resistance than the leading valved respirators* 

Filter Size 

AirWave 4200 

Model 2200 

0 1X 2X 

More surface, more airflow 

The outstanding performance of AirWave is due to its patent-pending, wave design 

technology. It allows more airflow in and out of the respirator for cool comfort and 

easier breathing. 

• Unique waves double the filter surface area of our comparable respirator 

• Dura-Mesh ® shell provides bi-directional protection from dirt 

on the outside and moisture on the inside 

Comfort inside and out 

By providing more surface area, AirWave ensures cool comfort inside the respirator, 

without a valve. Plus our exclusive FlexFit design provides added comfort and 

compliance over time. 

• FlexFit design expands and contracts as you move and speak, for optimal 

• comfort Pinch-free molded nose bridge eliminates metal nose-band 

readjustment and discomfort 

5 

Less resistance.* Better breathability. 

A key measure of breathability is resistance. For both inhaling and exhaling, AirWave provides 

less resistance than other valved and unvalved respirators. Benefits of lower resistance include: 

• Easier breathing that encourages longer wear 

• Optimal comfort that minimizes heat and moisture build-up

® 

Compare the air 

The AirWave difference: Up to 68% less resistance* than leading brands. 

vs. Valved Respirators 

vs. Unvalved Respirators 

Inhale 

Exhale 

Inhale 

Exhale 

12 

10 

8 

6 

4 

2 

Brand B 

Brand C 

Brand D 

Brand A 

AirWave 

Brand B 

Brand C 

Brand D 

Brand A 

AirWave 

Brand B 

Brand C 

Brand A 

AirWave 

Brand B 

Brand C 

Brand A 

AirWave 

12 

10 

8 

6 

4 

2 

0 

0 

Scale shows relative resistance (mmH 0) of AirWave model 4200 and leading brands’ models. 

2 

*Testing conducted at 85 liters per minute in accordance with NIOSH 42 CFR Part 84.180 initial 

resistance requirements. Resistance will vary with actual use conditions. Charts and percentages 

reflect averages of test results for 30 samples of each product. 

A price that won’t leave you breathless 

• Costs less than a valved respirator 

• Dura-Mesh shell adds lasting durability 

• Longer wear means less cost than other unvalved respirators 

Classic 2-Strap 

4200 N95 P2 Medium/Large 

4201 N95 P2 Small 

New exclusive SmartStrap ® 

Builds upon the latest wave technology of the 4200 series with the 

latest strap technology. 

• Adjustable soft cloth strap is cool and comfortable 

• Hangs from neck when not in use 

• Metal-free 

4200 & 4600 series meet heat and flame resistance in accordance with 

AS/NZS 1716-2003. 

Adjustable 

Hangable 

Exclusive SmartStrap 

4600 N95 P2 Medium/Large 

4601 N95 P2 Small 

6



Moldex ® respirators have many design innovations 

that set them apart from the competition. 

A pinch-free contour molded nose bridge provides 

unmatched comfort and eliminates the constant 

readjustment that is necessary with metal nosebands. 

Dura-Mesh ® shells provide bi-directional protection from 

dirt on the outside and moisture on the inside. 

These, and many other proprietary advantages create a 

family of Moldex respirators that can be worn comfortably for 

longer periods, increasing compliance while decreasing cost. 

Contour shaped 

for comfort 

Pinch Free Nose Bridge 

Outer Dura-Mesh ® keeps 

respirator clean looking. 

Inner Dura-Mesh ® prevents 

collapsing from heat and humidity. 

Meets heat and flame resistance in 

accordance with AS/NZS 1716-2003. 

Filter is protected on 

both sides by Dura-Mesh ® 

Softspun ® lining 

is comfortable 

against the face. 

The mesh design is a trademark 

of Moldex-Metric, Inc. 

COMMON APPLICATIONS FOR P2 PARTICULATE RESPIRATORS 

P2 Series 

Grinding, Torch Cutting, Sanding, Metal 

Pouring, Sweeping, Metal Working, Bagging, 

Foundries, Stone Quarrying, Agriculture, 

Metal Machining, Construction Sites, Cement, 

Ceramics Manufacturing, Underground Mining, 

Timber/Lumber Mills, Polishing, Buffing, Lime, 

Poultry, Textiles, Welding, Brazing, Soldering. 

P2 Plus Nuisance Levels of Ozone 

and Organic Vapours 

Welding, Arc Cutting, Foundry Operations, 

Brazing, Plasma Spraying, Laser Beam 

Cutting/Welding, Laboratory Settings, 

Agriculture, Petrochemical Manufacturing, 

Rendering Plants, Auto Repair, Mining 

Operations, Waste Disposal. 

P2 Plus Nuisance Levels of 

Acid Gas Irritants 

Aluminum Smelting, Glass Etching, 

Electroplating, Fiberglass Manufacturing, 

Paper Processing, Chemical Processing, 

Brewing Operations, Fertilizer Production. 

7

® 

2-STRAP P2 FLAT FOLD PARTICULATE RESPIRATORS 

FASTFIT 

• Flat fold convenience with 

contour molded comfort 

• Quick and easy to put on 

P2 Particulate 

Respirators without Valve 

2112P2 Medium/Large 

2-STRAP P2 PARTICULATE RESPIRATORS 

for classic comfort, fit and performance 

P2 Particulate Respirators 

without Valve 

1200P2 Dirt Dawgs ® Medium/Large 


without Valve 



with Valve 


P2 Particulate Welding Respirators with 

Valve plus Nuisance Organic Vapors 



with Valve plus 

Nuisance Acid Gases 


P2 Particulate Welding 

Respirators with Ventex ® Valve 

and Adjustable Strap 


EZ-ON 

® 

P2 PARTICULATE RESPIRATORS 

single strap convenience 

Eliminates the struggle of putting on and 

taking off a respirator. Perfect for workers 

who prefer to wear one strap. 

P2 EZ-ON ® Particulate 


EZ 22P2 Medium/Large 

P2 EZ-ON ® Particulate 

Respirators with Ventex ® Valve 

EZ 23P2 Medium/Large 

8



® 

HANDYSTRAP SERIES PARTICULATE RESPIRATORS 

for maximum cost savings 

Another Moldex exclusive product, HandyStrap with buckle, allows mask to comfortably 

hang down around the user’s neck when not in use – preventing premature disposal, 

reducing usage and saving money. 


without Valve 



with Ventex ® Valve 


2701P2 Small 

P2 Particulate Welding 

Respirators plus Nuisance 

Organic Vapors* 


2801P2 Small 

® ® 

SPECIAL OPS HANDYSTRAP SERIES PARTICULATE RESPIRATOR 

for the dirtiest jobs 

• Designed to meet the dirtiest working conditions, such as mining, foundries, welding and oil rigging. 

• The solid black color stays cleaner looking longer, preventing premature disposal and lowering total cost. 


with Ventex ® Valve 

M2700P2 Medium/Large 

RESPIRATOR LOCKERS ® 

• Ideal for workers at field sites. 

• Allows employer to monitor respirator usage, 

which reduces costs. 

• Reduces worker time going to get new masks. 

2850P2 with four 2800P2 masks 

plus Nuisance Organic Vapors 

*with Ventex ® Valve 

2350P2 with five 2300P2 masks 

9 

2250P2 with five 2200P2 masks

® 

HEALTHCARE PARTICULATE RESPIRATORS & SURGICAL MASKS 

• Highest ASTM level of fluid resistance on the market (160mm Hg). 

• NIOSH certified to have a filter efficiency of 95% or greater against 

non-oil based particulates. 

• Bacterial Filtration Efficiency (BFE)>99.9%. 

• Meets CDC guidelines for TB exposure control standards and 

protection against laser plumes or surgical smoke. 

• Meets heat and flame resistance in accordance with 

AS/NZS 1716-2003. 

• AS 4381-2002 Single-use face masks for use in Health Care. 

• TGA 35177 Mask Surgical, single-use. 

• TGA 12447 Intended to be used in clinical situations. Can be 

used in emergency situations by paramedics/ambulance officers. 

1500 N95* Series Particulate Respirators without Valve 

FASTFIT ® 

• Quick and easy to put on 

• Flat fold convenience with contour 

molded comfort 

• Individually packaged for hygiene 

in a dispenser style box 

N95* Particulate 


1712 N95* Medium/Large 

in 5 sizes for today’s diverse workforce 

• Meets CDC guidelines for protection against TB. 

• NIOSH certified to have a filter efficiency of 95% or greater against non-oil 

based particulates. 

• Exclusive Dura-Mesh ® shell resists collapsing in heat and humidity. 

• Molded nose bridge with soft foam nose cushion increases comfort and seals 

easily without a metal noseband. 

• Bacterial filter efficiency >99.9%. 

• Face piece is naturally contoured without pressure points. 

• Highest ASTM level of fluid resistance on the market (160mm Hg.) 

• Meets heat and flame resistance in accordance with 

AS/NZS 1716-2003. 



• TGA 12447 Intended to be used in clinical situations. Can be used in 

emergency situations by paramedics/ambulance officers. 

1510 N95* Extra Small 1511 N95* Small 1512 N95* Medium 1513* N95 Large 1517* N95 Low Profile Nose Bridge 

2212G N95* Series Particulate Respirators without Valve 

used for stockpiling orders only 

• Same specifications as 1500 Series. 



• TGA 12447 Intended to be used in clinical situations. 

Can be used in emergency situations by paramedics/ 

ambulance officers. 

2212G N95* M/L Medium/Large 

*P2 compliant 

6 

10



LOWER YOUR TOTAL COST WITH MOLDEX 

Our customers are documenting the savings. The 

following example shows you how to calculate and 

document your own cost savings. 

Don’t take our word for it, do your own trial. Compare 

your current respirator against the Moldex ® Dura-Mesh ® 

respirators by completing the Cost Saving Summary 

found on the next page and on our website. 

Some respirators get dirty easily and collapse 

from moisture and humidity... and get tossed. 

Uncrushable Savings 

Our patented Dura-Mesh ® shells make our disposable respirators dirt 

and crush resistant so they can be worn longer. Which is way past the 

time other respirators get dirty, collapse, and get tossed. So you use 

fewer respirators and save big dollars. 

Break the “take off and toss” habit. 

Every break, workers toss their respirators. Every lunch. And every time 

they leave their work area. They don’t know what to do with them when 

they aren’t using them so they toss them. As many as five or six a day. 

Plus, some respirators crush and collapse from the heat and humidity. 

Others just look dirty, so they get tossed. Throwing away respirators 

before they are used up is a needless cost to your company. 

Outer Dura-Mesh ® keeps 

respirator clean looking. 

Inner Dura-Mesh ® prevents 

collapsing from heat and humidity. 

More comfort too. 

Our contoured nose bridge seals easily and consistently without a metal 

noseband that has to be pinched closed. So our respirator is more 

comfortable too. 

Filter is protected on 

both sides by Dura-Mesh ® 

Softspun ® lining 

is comfortable 

against the face. 

11

® 

DOCUMENTING YOUR SAVINGS easy as 1-2-3 

Determine a group of employees 

1 who will evaluate the Moldex 2 3 

Dura-Mesh ® respirators. 

Your local Moldex representative 

will train these employees on the 

Moldex ® respirators. 

After the trial period, collect the 

completed evaluation forms and 

calculate your reduced usage. 

Then, bottom line savings is 

calculated and documented on 

the cost savings summary. 

Dura-Mesh ® Employee 

Respirator Evaluation Form 

We appreciate you evaluating our Dura-Mesh ® respirator. 

Please keep track of how many you use per day. Thank you for trying Moldex. 

Employee 

Current Respirator Model 

Moldex ® Model Evaluated 

Department 

Number used per day 

Number used per day 

Make copy for each employee in test group. 

Moldex ® Dura-Mesh ® 

Cost Savings Summary 

Current 

Respirator 

Moldex 

Respirator 

Company: Model # Model # 

1. Average # of respirators per employee 

per day 

2. Total # of respirators used per day 

(#1 x total number of users) 

3. Total # of respirators used per year 

(#2 x 260 days) 

4. Cost per respirator 

5. Total respirator cost per year (#3 x #4) a b 

Total annual savings (#5a – #5b) 

To download a PDF version of this form go to page 10 of our full line catalog on our website: http://www.moldex.com/pdf/misc/FullLineCatalogAustralian.pdf 

6 

12

7000/9000 SERIES REUSABLE RESPIRATORS 

Comfortable, compact and easy to wear 

Compliance just got a whole lot easier. 

Moldex designed the 7000 half mask and 9000 full face series to 

be the most user friendly respirators on the market. The streamlined 

7000/9000 feature fewer parts, minimal maintenance, and a 

wider field of vision. They are both ultra–lightweight, durable, and 

economical, so maximum comfort with extended use is built-in. 

The 7000/9000 series add up to simple, comfortable, 

and economical respiratory protection that’s just plain 

EASY TO WEAR. 

7000 RESPIRATORS 

Adjustable head 

harness for a 

custom fit 

7000 in Drop Down Mode 

Wide flange fits 

more facial shapes 

comfortably 

Compact, fits under 

welding helmets 

Contoured neck buckles for 

comfort and quick attachment 

Low profile, angled 

cartridge placement 

for wider field of vision 

The versatile 7000 has optional drop down/lock down 

strap modes 

Easy mount bayonet 

cartridge/filter attachment 

Lock down mode 

Drop down mode 

Attached exhale cover for 

easy inspection 

13

® 

9000 RESPIRATORS 

Lightest weight facepiece 

of any popular model. Weighs 

less than 360 grams. 

Over-molded buckles for 

secure strap attachment. 

One finger strap release 

Easy to wear 

Stand away head 

harness for easy 

donning 

Completely free of 

metal parts 

Lens with scratch resistant 

coating meets AS 1337 

for impact protection. 

Tear away lens protector 

included 

Over-molded flange to lens. 

Eliminates heavy metal 

clamping frame for less 

weight and fewer parts 

Panoramic lens with peripheral 

vision side panels 

Integrated exhale area with 

attached cover. Fewer parts, simple 

maintenance and inspection 

Easy mount bayonet 

cartridge/filter attachment 

6 

14

7000/9000 SERIES REUSABLE RESPIRATORS 


7000 APPROVED RESPIRATOR COMBINATIONS 9000 APPROVED RESPIRATOR COMBINATIONS 

7000 Facepiece 

7001 Small 

7002 Medium 

7003 Large 

Cartridge 

Gas/Vapour and Particulate 

Cartridges 

7100A Organic Vapours - A1 

7600A Multi-Gas/Vapour Smart ® Cartridge - 

A1, B1, E1, K1 

7990A P2/P3 Particulates - HEPA* 


9001 Small 

9002 Medium 

9003 Large 

Cartridge 

*P2 protection when worn with the 7000 half mask 

P3 protection when worn with the 9000 full facepiece 

Cartridge 

Gas/Vapour with Pre-Filters 

Pre-Filter 

Pre-Filter 

Retainer 

Cartridges 



A1, B1, E1, K1 

Cartridge 

Pre-Filter 

Pre-Filters/Accessories 

8010A P2 Pre-Filter 

7020 Pre-Filter Retainer 

Pre-Filter 

Retainer 

Cartridge 

Piggyback 

Adapter 

Filter 

Disk 

Gas/Vapour with Piggyback 

P2/P3 Filter Disks 

Cartridges 



A1, B1, E1, K1 

Filter Disks/Accessories 

7940A P2/P3 Particulate Filter Disk* 

7920 Piggyback Adapter 

Cartridge 

Piggyback 

Adapter 

Filter 

Disk 



Filter Disk 

Particulate Stand Alone Filters 

Filter Disks 

7940A P2/P3 Particulate Filter Disk* 

7960A P2/P3 Particulate Filter 

Disk plus Nuisance OV* 

Filter Disk 



15 

*P2 protection when worn with the 7000 half mask

® 

7000/9000 FACEPIECES, CARTRIDGES, FILTERS & ACCESSORIES 

7000/9000 Facepieces 


7001 Small 

7002 Medium 

7003 Large 


9001 Small 

9002 Medium 

9003 Large 

7000/9000 Gas/Vapour and Filter Cartridges 


7600A Multi-Gas/Vapour Smart ® Cartridge 

A1, B1, E1, K1 


*P2 protection when worn with the 

7000 half mask. 

P3 protection when worn with the 

9000 full facepiece. 

7000/9000 Particulate Filters 

• Use 8010A P2 Pre-Filter with the 7020 Pre-Filter 

Retainer with any Gas/Vapour Cartridge. 

• Use the 7940A P2/P3 Filter Disk or 7960A P2/P3 

Filter Disk plus Nuisance OV as a stand alone 

filter or use the 7940A with the 7920A Piggyback 

Adapter with any Gas/Vapour Cartridge. 

8010A P2 Filter 

7940A P2/P3 Filter Disk 

7960A P2/P3 Filter Disk 

Plus Nuisance Organic Vapours 

7000/9000 Accessories and Replacement Parts 

7000 Replacement Parts: 

0072 Head Harness Assembly 

0073 Diaphragm Kit 

0074 Gasket Kit 

9000 Replacement Parts: 

0073 Diaphragm Kit 

0074 Gasket Kit 

0092 Head Harness 

0093 Face Shield Protectors 

0094 Med./Large Nose Cup Assembly 

0095 Small Nose Cup Assembly 

0098 Spectacle Kit 

7020 Pre-Filter Retainer 7920 Piggyback Adaptor 

0098 Spectacle Kit 

6 

16

8000 SERIES REUSABLE RESPIRATORS 


8000 PRE-ASSEMBLED RESPIRATORS 8000 APPROVED RESPIRATOR COMBINATIONS 

Organic Vapours 

• Approved for A1. 

• Includes 8000 Series facepiece and 8100A Organic 

Vapour Cartridges. 

8101A Small 

8102A Medium 

8103A Large 


8001 Small 

8002 Medium 

8003 Large 

Cartridge 

Gas/Vapour and Particulate 

Cartridges 


8600A Multi-Gas/Vapour Smart Cartridge - 

A1, B1, E1, K1 



Paint Spray/Pesticides 

• Approved for A1/P2 

• For oil-free paint sprays and pesticides. 

• Includes 8000 Series facepiece, 8100A Organic Vapour 

Cartridges, 8010A P2 Pre-Filters and 

8020 Pre-Filter Retainers. 

Cartridge 

Particulate 

Filter 

Pre-filter 

Retainer 

Gas/Vapour with Pre-Filters 

Cartridges 



A1, B1, E1, K1 

8111AN Small 

8112AN Medium 

8113AN Large 

Particulate Filter/Accessories 

8010A P2 Particulate Pre-Filter 

8020 Pre-Filter Retainer 

Multi-Gas/Vapour Smart ® Cartridges 

• Approved for A1, B1, E1, K1. 

• Includes 8000 Series facepiece and 8600A Multi-Gas/ 

Vapour Smart Cartridges. 

8601A Small 

8602A Medium 

8603A Large 

Cartridge 

Piggyback 

Adapter 

Filter 

Piggyback 

Adapter 

Gas/Vapour with Piggyback 

P2/P3 Filter Disks 

Cartridges 



A1, B1, E1, K1 

Filter Disk/Accessories 

8830A P2/P3 Particulate Filter* 

8920 Piggyback Adapter 

P2 Particulate 


• Approved for P2. 

• Includes 8000 Series facepiece, 8830A P2/P3 Filter and 

8900A Filter/Disk Holder.* 

8831A Small 

8832A Medium 

8833A Large 

Filter/Disk Holder 

Particulate 

Filter 

Filter/Disk 

Holder 

Particulate Stand Alone Filters 

Filter Disk 

8830A P2/P3 Particulate Filter* 

8010A P2 Particulate Filter 

8750A P2 Particulate Filter 

with Nuisance OV 

Accessories 

8900 Filter/Disk Holder 

*P2 Particulate w/ 8030A P2/P3 Cartridge Filter 

8031A Small 8032A Medium 8033A Large 

*P2 Particulate Welding w/ 8750A P2 

Nuisance Ozone/Organic Vapour Filter Disk 

8751A Small 8752A Medium 8753A Large 


17 

*Image not shown

® 

8000 FACEPIECES, CARTRIDGES, FILTERS & ACCESSORIES 


• Extra-wide sealing surface for comfort and fit. 

• Low maintenance because there are 

no gaskets or yoke to replace. 

• Easy drop down strap assembly. 

• Low profile for a wide 

field of vision. 

8000 Gas/Vapour and Filter Cartridges with inhale valve 


8600A Multi-Gas/Vapour Smart Cartridge - A1, B1, E1, K1 


8000A Facepiece 

8001 Small 

8002 Medium 

8003 Large 

• New inhalation valve with each cartridge 


8000 Particulate Filters 

• Use 8010A P2 Filter together with the 8020 Pre-filter Retainer as a 

pre-filter with any Gas/Vapour cartridge or as a stand-alone filter with the 

8900 Filter/Disk Holder. 

• Use the 8830A P2/P3 Filter as a stand-alone filter with the 8900 Filter/Disk 

Holder or piggyback with a cartridge with the 8920 Piggyback Adapter. 

8010A P2 Filter 

8000 Accessories and Replacement Parts 

8750A P2 with Nuisance Ozone/OV 

(only for use as standalone with 8900) 

8830A P2/P3 Filter 


8020 Filter Retainer 8900 Filter/Disk Holder 8920 Piggyback Adapter 0083 Exhale Valve Assembly 0082 Head Strap Assembly 

Storage Box Kits (Available in New Zealand only) 

Respirator kits available 

402309-1830 Storage Box only. 

18

TWIST IN DISPOSABLE & REUSABLE EARPLUGS 

Rotate and push for a custom fit 

Like a fingerprint, no two ear canals are alike. 

GLIDE’s unique multi-curved stem rotates for a 

custom fit inside each ear canal. With its unique 

curved stem design, you simply push & twist 

for GLIDE to angle its way to find your fit. 

• Unique multi-curved stem rotates for a 

custom fit 

• Large handle on curved stem for easy 

insertion & removal 

• Soft triple flange plug can be washed 

and reused 

• Cord can be attached at any desired length 

• Look for the bright green color as a symbol 

of Moldex quality 

• 100% PVC-Free like all Moldex products & 

packaging – for a greener alternative 

• Made in U.S.A. 

Large soft foam pod, 

for a comfortable, 

snug seal & fit 

Unique multi-curved 

stem rotates for 

a custom fit 

Soft triple 

flange plug 

can be washed 

and reused 

Large handle on 

curved stem for easy 

insertion & removal 

Foam 

Trio 

19

® 

6940 & 6945 Glide Foam 

Twist in Foam Earplugs 

6940 Glide Foam, Uncorded 

6945 Glide Foam, Corded 

SLC 80 

24dB 

Class 4 

6445 Glide Trio 

Triple Flange Reusable Earplugs 

6445 Glide Trio, Corded 

SLC 80 

26dB 

Class 5 

No two ear 

canals are alike 

Push & twist, for 

GLIDE to find your fit 

To attach optional cord 

Form a loop at end of cord, 

position around groove at 

base of handle then pull 

down to lock in place. 

6 

20

DISPOSABLE FOAM EARPLUGS 

Independently tested SLC 80 

Ratings 

Moldex ® hearing protection is designed for all-day 

comfort and compliance. All of our earplugs are PVC-Free ® 

and have been tested as hypoallergenic. 

All Moldex ® hearing protection is independently tested 

to AS/NZS 1270:2002. 

Look for the bright green colour and the exclusive 

streaks and swirls as symbols of Moldex quality. 

Pura-Fit ® Foam Earplugs 

• Soft foam for all day comfort. 

• Tapered shape for easy insertion. 

• Longer length for easy fitting and removal. 

• An industry favorite. 

Goin’ Green ® Foam Earplugs 

SLC 80 29dB/CLASS 5 

• Extra-soft, low-pressure foam for comfort and fit. 

• Tapered shape for easy insertion and removal. 

• Shaped to fit even very small ear canals. 

• Non-irritating smooth surface. 

• The perfect earplug for the NASCAR ® racing fan and for 

industrial environments. 

6800 Pura-Fit, Uncorded 6900 Pura-Fit, Corded 

SLC 80 27dB/CLASS 5 SLC 80 26dB/CLASS 5 

SparkPlugs ® Foam Earplugs 


• SparkPlugs spark up hearing protection programs. 

• Soft foam and tapered design fit snugly in the ear canal. 

6620 Goin’ Green, Uncorded 6622 Goin’ Green, Corded 

Mellows Foam Earplugs 


• Made of extra-soft, lightweight foam for all-day comfort. 

• Tapered for a snug fit while gently conforming to the ear canal. 

• Radiant orange colour for easy compliance checks. 

6604 SparkPlugs, Uncorded 6654 SparkPlugs, Corded 

Metal Detectable Foam Earplugs 


• Metal detectable earplugs and new metal detectable cord for food 

processing application. 

• SparkPlugs have an enclosed ball bearing that eliminates any 

exposed metal. 

• The ball bearing and cord are in separate holes so that the earplugs 

remain detectable even if the cord is removed. 

6820 Mellows, Uncorded 6840 Mellows, Corded 

The PVC-Free logo, and the random swirled colour patterns are registered 

trademarks. ®NASCAR is registered trademark of the National Association for 

Stock Car Auto Racing. 

6615 Metal Detectable SparkPlugs, Corded 

21

® 

PLUGSTATIONS ® 

• Increases compliance. Puts plugs in easily accessible areas 

so workers use them. 

• Lowers usage – workers take just one pair. 

• Sealed PlugStations ensure plugs stay sanitary. 

• Affordable enough to mount in any location that requires 

hearing protection. 

• Eliminates individual packaging, less mess and maintenance. 

• Mounting bracket, template and hardware included with 

every PlugStation. 

• Dispenser is completely recyclable. 

plugs where you need them 

6844 250 Pair 

Pura-Fit PlugStation 

6845 500 Pair 

Pura-Fit PlugStation 

6647 500 Pair 

Goin’ Green PlugStation 

Independently tested 

SLC 80 

ratings. Tested to 

AS/NZS 1270:2002. 

Turn knob counter 

clockwise to 

dispense earplugs. 

6644 250 Pair 

SparkPlugs PlugStation 

6645 500 Pair 

SparkPlugs PlugStation 

Workers use earplugs 

when and where they 

are needed. Eliminates 

messy packaging waste 

and pocketful fill ups. 

6846 250 Pair 

Mellows PlugStation 

6847 500 Pair 

Mellows PlugStation 

6 

22

REUSABLE EARPLUGS, BANDS & EARMUFFS 

Independently tested SLC 80 

Ratings 

Rockets ® Earplugs 


• Easy grip handle for insertion and removal. 

• Air bubble tip provides cushioned comfort. 

• Soft, flexible flanges provide a superior seal. 

• Earplugs can be washed and reused. 

• Pocket-Pak ® carrying case provides hygienic storage between uses. 

Air pocket for 

comfort. 

Softer material 

for a better seal. 

Stem doesn’t bend 

allowing easy insertion. 

6400 Rockets, Uncorded 6404 Rockets, Corded (bagged) 

6405 Rockets, Corded 6420 Rockets, with optional cloth cord 

Bright green 

colored stem. 

Rockets ® Metal Detectable Earplugs 


Jetz ® Earplugs 


• Extra-soft material and triple flange design seal gently and 

snugly without pressure 

• Optional cloth cord attaches easily for a variety of working conditions 

and locks securely to plug 

• Plugs can be washed and reused 

• Bright blue colour. 

• Metal detectable earplugs and new metal detectable cord for food 

processing applications. 

• Rockets ® have an enclosed metal spring that eliminates any 

exposed metal. 

• The spring and cord are in separate holes so that the earplugs 

remain detectable even if the cord is removed. 

6415 Rockets Metal 

Detectable Reusable Plugs 

6450 Jetz, Uncorded 

6455 Jetz, Corded 

Jazz Band ® Canal Cap Hearing Protector 


23 

• New, band pressure is reduced by 50%. 

• Extra-soft tapered foam pods gently conform to the ear canal. 

• Hangs easily down around the user’s neck with optional 

breakaway neck cord. 

• Jazz Band doesn’t interfere with eyewear. 

6506 Jazz Band ® 

6504 Replacement Pods/Neck Cord 

Hangs around neck

® 

M1 Premium Earmuff 


Black-chrome, spring 

steel headband 

Six adjustment 

points 

• M1 has a black-chrome, spring-steel headband that resists 

fatigue and won’t twist out of shape. 

• Folds into a super compact size for easy storage. 

• Six adjustment points provide a custom and comfortable fit. 

• SoftCoat ® covering helps muffle transmitted noise. 

• Exclusive iridescent color and sculpted shape for great looks. 

6100 M1 Premium Earmuff 

6105 Hygiene Kit* 

Folds into a super 

compact size for 

easy storage. 

Exclusive 

iridescent color 

and sculpted 

shape 

M2 Multi-Position Earmuff 

SLC 80 33dB/CLASS 5 (Over-the-Head) 

• M2 has special grips on the cups and a durable three position band to make 

fitting and alignment quick and easy. 

• Headband is made of durable, lightweight plastic. 

• The cup adjustment is infinitely variable, distributing pressure evenly for a 

comfortable fit. 

• SoftCoat ® covering helps muffle transmitted noise. 

• Exclusive iridescent color and sculpted shape for great looks. 

• Can be worn Over-the-Head, Under-the-Chin or Behind-the-Neck. 

• Stabilizing strap included. 

6200 M2 Multi-Position Earmuff 


Z2 Multi-Position Economy Earmuff 

SLC 80 30dB/CLASS 5 (Over-the-Head) 

• Cost effective Earmuff features a three position headband so that it can be worn 

Over-the-Head, Under-the-Chin or Behind-the-Neck. 

• Special molded grips make fitting and alignment quick and easy. 

• Solid black color keeps the Z2 cleaner looking. 

• Headband is made of durable, lightweight plastic. 

6201 Z2 Earmuff 


*6105 Hygiene Kit includes 

cushions and foam inserts. 

6 

24

FIT TESTING, CUSTOMER SUPPORT & ORDERING 

Disposable/Reusable Respirators & Hearing 

FIT TESTING SUPPLIES AND TRAINING RESOURCES 

*BITREX Qualitative Fit Test Kit (includes all items asterisked) 0102 

*Threshold Screening Solution – BITREX (6 tubes) 0503 

*Fit Test Solution – BITREX (6 tubes} 0504 

7000/9000 Probed Cartridge Fit Test Kit 7006 

8000 Probed Cartridge Fit Test Kit 8006 

*Alcohol Wipes 8007 

Fitting posters for respiratory and hearing protection available online at www.moldex.com 

RESPIRATORY PROTECTION – DISPOSABLE RESPIRATORS 

Product 

Code Description Size Display Case 

EZ 22P2 P2 EZ-ON ® M/L 10/Bag 20 Bags 

EZ 23P2 P2 EZ-ON ® w/ Ventex ® Valve M/L 10/Bag 10 Bags 

1200P2 Dirt Dawgs ® P2 2-Strap M/L 20/Box 18 Boxes 

2112P2 Flat Fold Particulate Respirator M/L 20/Box 10 Boxes 

2200P2 P2 2-Strap M/L 20/Box 12 Boxes 

2300P2 P2 2-Strap w/ valve M/L 10/Box 10 Boxes 

2315P2 P2 2-Strap w/ valve M/L 10/Box 10 Boxes 

2400P2 P2 2-Strap plus Nuisance M/L 10/Bag 10 Bags 

Organic Vapours 

2500P2 P2 2-Strap plus Nuisance Acid Gases M/L 10/Bag 10 Bags 

2600P2 P2 HandyStrap ® M/L 15/Box 12 Boxes 

2700P2 P2 HandyStrap ® w/ Ventex ® Valve M/L 10/Box 10 Boxes 

2701P2 P2 HandyStrap ® w/ Ventex ® Valve S 10/Box 10 Boxes 

2800P2 P2 HandyStrap ® w/ Ventex ® Valve M/L 10/Box 10 Boxes 

plus Nuisance Organic Vapours 

2801P2 P2 HandyStrap ® w/ Ventex ® Valve S 10/Box 10 Boxes 

plus Nuisance Organic Vapours 

M2700P2 P2 HandyStrap ® (Black) M/L 10/Box 10 Boxes 

w/ Ventex ® Valve 

2250P2 Respirator Locker ® w/ 2200P2 M/L 5/Locker 27 Lockers 



4200 N95 P2 P2 2-Strap AirWave Respirator M/L 10/Box 8 Boxes 

4201 N95 P2 P2 2-Strap AirWave Respirator S 10/Box 8 Boxes 

4600 N95 P2 P2 SmartStrap AirWave Respirator M/L 10/Box 10 Boxes 

4601 N95 P2 P2 SmartStrap AirWave Respirator S 10/Box 10 Boxes 

RESPIRATORY PROTECTION – 7000/9000 REUSABLE RESPIRATORS 

Product 


0072 7000 Head Strap Assembly 1/Bag 20 Bags 

0073 Diaphragms (7000/9000) 20 Inhale, 1 Kit 

5 Exhale 

0074 Gaskets (7000/9000) 20/Bag 1 Bag 

0092 9000 Head Harness 1/Bag 5 Bags 

0093 9000 Faceshield Protector 15/Bag 1 Bag 

0094 9000 M/L Nose Cup 1/Box 5 Boxes 

0095 9000 S Nose Cup 1/Box 5 Boxes 

0098 9000 Series Spectacle Kit 1/Box 1 Box 

9001 9000 Full Face Respirator S 1/Box 2 Boxes 

9002 9000 Full Face Respirator M 1/Box 2 Boxes 

9003 9000 Full Face Respirator L 1/Box 2 Boxes 

7001 7000 Half Mask Respirator S 1/Bag 12 Bags 

7002 7000 Half Mask Respirator M 1/Bag 12 Bags 

7003 7000 Half Mask Respirator L 1/Bag 12 Bags 

7006 Probed Cartridge Kit (7000/9000) 1/Kit 1 Kit 

7020 Pre-Filter Retainer 1 Pair/Bag 50 Bags 

7100A Organic Vapour Cartridges - A1 1 Pair/Bag 30 Bags 

7920 Piggyback Adapter 1 Pair/Bag 30 Bags 

7600A Multi-Gas/Vapour Smart ® Cartridges - A1, B1, E1, K1 1 Pair/Bag 30 Bags 

7940A P2/P3 Filter Disk 1 Pair/Bag 30 Bags 

7960A P2/P3 Filter Disk with Nuisance OV 1 Pair/Bag 30 Bags 

7990A P2/P3 Particulate Filter Cartridges 1 Pair/Bag 30 Bags 

** 

8010A P2 Particulate Filter 5 Pair/Bag 10 Bags 

*** 

8020 Splash/Spark Protector 10 Pair/Box 5 Boxes 

Healthcare & Surgical Masks 

1510 N95* P2 Healthcare & Surgical Mask XS 20/Box 8 Boxes 

1511 N95* P2 Healthcare & Surgical Mask S 20/Box 8 Boxes 

1512 N95* P2 Healthcare & Surgical Mask M 20/Box 8 Boxes 

1513 N95* P2 Healthcare & Surgical Mask L 20/Box 8 Boxes 

1517 N95* P2 Healthcare & Surgical Mask LP 20/Box 8 Boxes 

1712 N95* Flat Fold Healthcare & Surgical Mask M/L 20/Box 10 Boxes 

2212G N95* P2 Healthcare & Surgical Mask M/L 20/Box 12 Boxes 

*P2 compliant 

9700A-748 REV F 1/13 

25

® 

CUSTOMER SERVICE AND TECHNICAL SUPPORT 

There’s even comfort in our support 

From fit testing to product training, Moldex is always available 

to provide solutions that address your workers’ safety requirements. 

Our field and sales team, customer service, and technical 

support departments are available whenever you need support. 

And our online technical library is available 24 hours a day at 

www.moldex.com. 

For in-depth details or to speak 

with a Moldex representative 

AUSTRALIA 

TEL: +61 (02) 9838 7588 

FAX: +61 (02) 9838 7544 

Email: moldexaustralia@moldex.com 

NEW ZEALAND 

TEL: +64 (9) 837 8247 

FAX: +64 (9) 837 8248 

Email: moldexnz@moldex.com 

Email customerservice@moldex.com 

Email tech@moldex.com 

RESPIRATORY PROTECTION – 8000 REUSABLE RESPIRATORS 

Product 


0082 Head Strap & Assembly 4/Bag 5 Bags 

0083 Exhale Valve Assembly 6/Bag 5 Bag 

8001 8000 Facepiece Only S 1/Bag 12 Bags 

8002 8000 Facepiece Only M 1/Bag 12 Bags 

8003 8000 Facepiece Only L 1/Bag 12 Bags 

8006 Probed Cartridge Kit (8000) 1/Kit 1/Kit 

* 8010A P2 Particulate Filter 5 Pair/Bag 10 Bags 

8020 Filter Retainer 10 Pair/Box 5 Boxes 

8030A P2/P3 Particulate Filter Cartridge - HEPA 5 Pair/Box 6 Boxes 

8100A Organic Vapour Cartridges - A1 5 Pair/Box 6 Boxes 

8300A Organic Vapour/Acid Gas Cartridges - A1, B1, E1 5 Pair/Box 6 Boxes 

8600A Multi-Gas/Vapour Smart ® Cartridges - A1, B1, E1, K1 5 Pair/Box 6 Boxes 

8750A P2 with Nuisance Ozone/OV 5 Pair/Bag 10 Bags 

8900 Filter/Disk Holder 5 Pair/Bag 6 Bags 

8920A Piggyback Adapter 5 Pair/Box 6 Boxes 

Pre-Assembled Respirators 

8031A P2 Respirator w/ 8030A P2/P3 Cartridge Filter S 1/Bag 12 Bags 

8032A P2 Respirator w/ 8030A P2/P3 Cartridge Filter M 1/Bag 12 Bags 

8033A P2 Respirator w/ 8030A P2/P3 Cartridge Filter L 1/Bag 12 Bags 

8101A Organic Vapour - A1 Respirator S 1/Bag 12 Bags 

8102A Organic Vapour - A1 Respirator M 1/Bag 12 Bags 

8103A Organic Vapour - A1 Respirator L 1/Bag 12 Bags 

8111AN Paint Spray/Pesticide - A1 P2 Respirator S 1/Bag 12 Bags 

8112AN Paint Spray/Pesticide - A1 P2 Respirator M 1/Bag 12 Bags 

8113AN Paint Spray/Pesticide - A1 P2 Respirator L 1/Bag 12 Bags 

8601A Multi-Gas Vapour Smart ® - A1,B1,E1,K1 Respirator S 1/Bag 12 Bags 

8602A Multi-Gas Vapour Smart ® - A1,B1,E1,K1 Respirator M 1/Bag 12 Bags 

8603A Multi-Gas Vapour Smart ® - A1,B1,E1,K1 Respirator L 1/Bag 12 Bags 

8751A P2 Welding w/ Nuisance Ozone/Organic Vapours S 1/Bag 12 Bags 

8752A P2 Welding w/ Nuisance Ozone/Organic Vapours M 1/Bag 12 Bags 

8753A P2 Welding w/ Nuisance Ozone/Organic Vapours L 1/Bag 12 Bags 

8831A P2 Respirator w/ 8830A P2/P3 Filter Disk S 1/Bag 12 Bags 

8832A P2 Respirator w/ 8830A P2/P3 Filter Disk M 1/Bag 12 Bags 

8833A P2 Respirator w/ 8830A P2/P3 Filter Disk L 1/Bag 12 Bags 

**8010A P2 pre-filters can be used with 7000, 8000 and 9000 series respirators. 

***8020 can be used as a splash and spark protector when used with the 7000 and 9000 series respirators. 

HEARING PROTECTION – DISPOSABLE FOAM EARPLUGS 

Product 

Code Description Display Case 

6800 Pura-Fit ® Uncorded 200 Pairs/Box 10 Boxes 

6900 Pura-Fit ® Corded 100 Pairs/Box 20 Boxes 

6844 Pura-Fit ® PlugStation ® 250 Pairs 6 Dispensers 

6845 Pura-Fit ® PlugStation ® 500 Pairs 4 Dispensers 

6604 SparkPlugs ® Uncorded 200 Pairs/Box 10 Boxes 

6654 SparkPlugs ® Corded 100 Pairs/Box 20 Boxes 

6615 Metal Detectable SparkPlugs ® Corded 100 Pairs/Box 20 Boxes 

6644 SparkPlugs ® PlugStation ® 250 Pairs 6 Dispensers 

6645 SparkPlugs ® PlugStation ® 500 Pairs 4 Dispensers 

6620 Goin’ Green ® Uncorded 200 Pairs/Box 10 Boxes 

6622 Goin’ Green ® Corded 100 Pairs/Box 20 Boxes 

6647 Goin’ Green ® PlugStation ® 500 Pairs 4 Dispensers 

6820 Mellows ® , Uncorded 200 Pairs/Box 10 Boxes 

6840 Mellows ® , Corded 100 Pairs/Box 20 Boxes 

6846 Mellows ® , 250 Pairs PlugStation ® 250 Pairs 6 Dispensers 

6847 Mellows ® , 500 Pairs PlugStation ® 500 Pairs 4 Dispensers 

6940 Glide ® Foam, Uncorded 100 Pairs/Box 4 Boxes 

6945 Glide ® Foam, Corded 100 Pairs/Box 4 Boxes 

HEARING PROTECTION – REUSABLE 

Product 

Code Description Display Case 

6445 Glide ® Trio, Corded 50 Pairs/Box 4 Boxes 

6450 JETZ ® Uncorded 50 Pairs/Box 4 Boxes 

6455 JETZ ® Corded 50 Pairs/Box 4 Boxes 

6400 Rockets ® Uncorded 50 Pairs/Box 4 Boxes 

6405 Rockets ® Corded 50 Pairs/Box 4 Boxes 

6415 Rockets ® Metal Detectable, Corded 50 Pairs/Box 4 Boxes 

6420 Rockets ® w/ Cloth Cord 50 Pairs/Box 4 Boxes 

6100 M1 Premium Earmuff 1/Box 10 Boxes 

6105 Earmuff Hygiene Kit 1 Pair/Bag 20 Bags 

Includes Cushions & Foam Inserts 

6200 M2 Multi-Position Earmuff 1/Box 20 Boxes 

6201 Z2 Multi-Position Earmuff 1/Bag 20 Bags 

6504 Replacement Pods & Neck Cord 5 Pairs & 50 Bags 

for Jazz Band ® Hearing Band 

1 Neck Cord/Bag 

6506 Jazz Band ® Hearing Band 10 Bands/Box 5 Boxes 

6 

26

AUSTRALIA 

Unit 30/14-16 Stanton Road, 

Seven Hills, NSW 2147 

TEL: +61 (02) 9838 7588 

FAX: +61 (02) 9838 7544 

E-mail: moldexaustralia@moldex.com 

www.moldex.com 

NEW ZEALAND 

3 Spence Road 

Henderson, Auckland, NZ 

TEL: +64 (9) 837 8247 

FAX: +64 (9) 837 8248 

E-mail: moldexnz@moldex.com 


U.S.A. (Corporate Office) 

Moldex-Metric, Inc. 

10111 West Jefferson Blvd. 

Culver City, CA 90232 

TEL: +1 (800) 421-0668 

or +1 (310) 837-6500 

FAX: +1 (310) 837-9563 

E-mail: sales@moldex.com 


Moldex offices serviced in the U.S.A. 

MEXICO / LATIN AMERICA 

Calz. Los Arcos 168 – 3 

Col. Loma Dorada 

Querétaro, Qro. 

76060, México 

TEL: +52 (442) 234-1230 

FAX: +52 (442) 234-1231 

E-mail: moldexmexico@moldex.com 


BRAZIL 

Rua tucuma 353 sobreloja Jardim Europa 

Sao Paulo, SP 01455-010 Brasil 

TEL/FAX: +55 (11) 2659 2108 

E-mail: moldexbrazil@moldex.com 

CHILE 

La Reconquista 3408, Villa Codelco 

Antofagasta, Chile 

TEL/FAX: +56 (55) 77 5410 

E-mail: moldexchile@moldex.com 


CANADA 

10111 West Jefferson Boulevard 

Culver City, CA 90232 

TEL: +1 (310) 837-6500 Ext. 517 

FAX: +1 (310) 837-9563 

E-mail: sales@moldex.com 


MOLDEX JAPAN K.K. 

Level 9, Edobori Center Building, 

2-1-1 Edobori, Nishi-ku, 

Osaka 550-0002 Japan 

TEL: +81 (6) 6225-1030 

FAX: +81 (6) 6225-1111 

E-mail: moldexjapan@moldex.com 


® 

Moldex offices serviced in Europe 

GERMANY (European Head Office) 

Moldex-Metric AG & Co. KG 

Tübinger Strasse 50 

72141 Walddorf 

TEL: +49 (71) 27 81 01 02 

FAX: +49 (71) 27 81 01 48 

E-mail: info@moldex-europe.com 

www.moldex.de 

CZECH REPUBLIC 

Moldex-Metric VOS 

Janderova 525 

56203 Usti nad Orlici 

TEL: +420 (465) 524 109 F 

FAX: +420 (465) 521 319 

www.moldex.cz 

FRANCE 


Lotissement Girodet, Bât. A 

26500 Bourg les Valence 

TEL: +33 (4) 75 78 58 90 

FAX: +33 (4) 75 78 58 91 

E-mail: info@fr.moldex-europe.com 

www.moldex.fr 

ITALY 


Via S. Francesco, 19 

22066 Mariano Comense(CO) 

TEL: +39 (031) 35 51 006 

FAX: +39 (031) 35 51 007 

E-mail: info@it.moldex-europe.com 

www.moldex.it 

NETHERLANDS 


Van Utrechtweg 38 

2921 LN Krimpen a/d IJssel 

TEL: +31 (1) 80 53 00 53 

FAX: +31 (1) 80 53 00 55 

E-mail: info@nl.moldex-europe.com 

www.moldex.nl 

SPAIN / PORTUGAL 


Polígono Industrial Molí dels Frares 

Calle C No 30 

08620 Sant Vicenç dels Horts (Barcelona) 

TEL: +34 (93) 58 89 950 

FAX: +34 (93) 58 89 953 

E-mail: info@es.moldex-europe.com 

www.moldex.es 

SWEDEN 


Kapplöpningsgatan 14 

25230 Helsingborg 

TEL: +46 (42) 32 67 80 

FAX: +46 (42) 32 67 82 

E-mail: info@se.moldex-europe.com 

www.moldex.se 

UNITED KINGDOM 


Unit 9, Glaisdale Pt. 

Bilborough 

Nottingham NG8 4GP 

TEL: +44 (115) 985 4288 

FAX: +44 (115) 985 4211 

E-mail: info@uk.moldex-europe.com 

www.moldex.co.uk

Full Line Catalog - Moldex

Create successful ePaper yourself

Delete template?

Save as template?