You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 1 Checking and Installing<br />
1-1 Checking Products<br />
Our Servo Pack have already <strong>com</strong>pletely been functionally examined before leaving the factory. In order to protect the<br />
products from the damage during transportation, please check the items below before sealing off the pack:<br />
• Check if the models of servo driver and motor are the same with the models of ordering.<br />
(About the model explanation, please check the chapters below)<br />
• Check if there are damage or scrape out side of the servo driver and motor.<br />
(If there is any damage during transportation, do not power ON)<br />
• Check if there are any bad assembly or slipped <strong>com</strong>ponent in the Servo Drive and Motor<br />
• Check if the Motor’s rotor and shaft can be rotated smoothly by hand<br />
(The Servo Motor with Mechanical-Brake can not be rotated directly)<br />
• There must be the “QC”-seal in each servo drive, if not, please do not proceed Power ON.<br />
If there is any bug or irregular under the situation above, please contact TED’s Local sales representative or distributor<br />
instantly.<br />
1-1-1 Confirming with Servo Drives<br />
TSTA – 15 A<br />
Drive Series:<br />
TSTA SERIES<br />
Drive Model:<br />
15 / 20 / 30 / 50 / 75<br />
P.S : Maximum output power<br />
15 : 400 W 50 : 2 KW<br />
20 : 750 W 75 : 3 KW<br />
30 : 1 KW<br />
AC Input Voltage<br />
A : single phase 110V<br />
B: single phase 220V<br />
C: single/3 phase 220V<br />
D: 3 phase 220V<br />
1-1
Change language