You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Step Control Keys LED Display after Operation Description<br />
1 Power On On” power on “ Drive Status parameter is displayed.<br />
2<br />
Pressing MODE-Key 6 times, position parameter Pn 301 will<br />
be displayed.<br />
3 Use INCREMENT- Key to display Pn317.<br />
4 To view the Pn317 preset press ENTER-Key for 2 seconds.<br />
5<br />
6<br />
7<br />
To move to the most significant digit press the ENTER-Key<br />
4 times.<br />
Press DECREMENT-Key once to set the most significant digit<br />
To 1. And press the DECREMENT-Key once again.<br />
All 5 decimal points will light up to indicate a negative number.<br />
To save the altered preset value, Press the ENTER- Key for 2<br />
seconds until “SET”is displayed briefly and then<br />
display is returned to parameter Pn 317.<br />
Alarm Reset from the Keypad.<br />
All alarm displays can be cleared from the keypad without a need for an external Alarm clear (Reset) signal.<br />
Ex. Under voltage Alarm AL-01.<br />
Step Control Key LED Display after Opertion Description<br />
1 Alarm Under voltage Alarm AL-01 is displayed.<br />
2<br />
To clear Alarm:-<br />
Remove input contact SON (Servo On).<br />
Then press INCREMENT-Key and DECREMENT-Key<br />
at the same time.<br />
The display will show RESET briefly and then returns back to<br />
parameter display.<br />
3-5
Change language