Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Parameter Name & Function Default Unit<br />
★Hn514.0<br />
★Hn514.1<br />
DO-1<br />
Setting<br />
Explanation<br />
Signal<br />
Functions<br />
01 RDY Servo Ready<br />
02 ALM Alarm<br />
03 ZS Zero Speed<br />
04 BI Brake Signal<br />
05 INS In Speed<br />
06 INP In Position<br />
07 HOME HOME<br />
08 INT In Torque<br />
DO-1<br />
★Hn514.2 Setting<br />
Explanation<br />
0 Close, when the output is activated.<br />
1 Open, when the output is activated.<br />
DO-2<br />
★Hn515<br />
Plearse refer to Hn514<br />
★Hn516<br />
★Hn517<br />
DO-3<br />
Plearse refer to Hn514<br />
DO-4<br />
Plearse refer to Hn514<br />
New setting will be<strong>com</strong>e effective after re-cycling the power.<br />
01 X<br />
0 X<br />
002 X<br />
003 X<br />
006 X<br />
Setting<br />
Range<br />
01<br />
│<br />
08<br />
0<br />
│<br />
1<br />
001<br />
│<br />
108<br />
001<br />
│<br />
108<br />
001<br />
│<br />
108<br />
Control<br />
Mode<br />
Chapter<br />
ALL 5-6-1<br />
ALL 5-6-1<br />
ALL 5-6-1<br />
ALL 5-6-1<br />
Warning! If any of programmable Inputs of DI-1 ~ DI-13 are set for the same type of function<br />
then the logic state selection ( NO or NC selection) for these inputs must be the same type.<br />
Otherwise an Alarm will be displayed. AL-07 (Abnormal DI/DO programming).<br />
6-28
Change language