Untitled - Ozone

LINES
Flying Lines
Ozone line sets are made from the highest quality SK 75 Dyneema. Woven with a tight, square braid and treated with a special heating process, this line is highly resistant to
abrasion, water absorption and stretching. Lines are cut, pre- stretched, sleeved and stitched to ensure 100% accuracy. The lines are final load tested to 60% of their breaking
strain to “lock” the line and as a final production check. New for 2007 we have improved the stiffness of the flying lines making the lines easier to un-wind.
Bridle Lines
Our aim when designing the bridle lines is to use the least amount of line possible, to minimize parasitic drag through the air, resulting in a more performant kite. Kite design has
advanced to the point where the manufacturing accuracy and diameter of the line is vitally important. To achieve this accuracy, we use the highest quality Edelrid Dyneema which
is stitch finished for extra strength and less drag. Every Ozone kites bridle is checked to within 5mm accuracy before it leaves our factory to ensure your kite flies perfectly. The
‘kook-proof’ colour-coded and labelled line connection system makes set-up safer and completely stress-free for riders new to kiting.
(Frenzy 300Kg; Haka 300/200kg Cult 200/110 Imps 110kg)
ATTACHMENT TABS PULLEYS
Our attachment tabs are sewn deep into the reinforcement area of the ribs, which means that the load is spread over a larger area of material, thus reducing any stretching and
ageing of the cloth.
PULLEYS
For our kites and bar systems that require pulleys we use Ronstan pulleys with a high grade stainless steel body and stainless steel ball bearings to ensure an infinite working life
and smooth power transfer. The pulleys form an integral part of the safety system on the kite, which is why we’ve chosen a pulley with a breaking load of 550kg for the de-power
speed system!