TM 3-4240-280-10

2-5. PREVENTIVE AINTIENANCE CHECKS AND SERVICES (PMC8) (CONT).
ITEM TO
NOT FULLY
ITEM CHECK/ MISSION
NO. INTERVAL SERVICE PROCEDURE CAPABLE IF:
1 BEFORE, c. Check facepiece(1) for hole, Facepiece has holes
(nt) WEEKLY tear or splits. Check for tears, or splits which
sticky or spongy areas. are deep an allow
Facepiece has sticky
or spongy area.
BEFORE, d. Check facepiece (1) for dry rot Facepiece has stiff
WEEKLY (stiff dry areas which crumble dry areas, which
when rubbed between two crumble when rubbed
fingers) or cracks that expand or crack which get
when the rubber is stretched bigger when the
rubber is stretched.
2-24 Change 3