2008 Best Deals - Swiss Instruments Ltd

Best Deals
2008
Promotion ends 12/31/08

TESA-HITE
MAGNA 400 and 700
• Long measuring span and
rugged design
• Fully protected against:
- Water, Oils, Dust
• 16” (415 mm) and 28”
(715 mm) measuring range
• 8 µm /0.0003” accuracy
• Automatic diameter
measurement using TESA’s
patented system for detecting
culmination point
• TESA magnetic measuring
system (TESA Magna µ
System Patented)
• Compatible with TESA
MICRO-HITE accessories,
including measuring inserts
and holder
• SCS calibration certificate
delivered with each instrument
Shop-proof
Technology
IP67 Digital Electronic Calipers
IP67 Compliant -
Unrivaled protection against the penetration
of liquid or solid contaminants.
• Full protection from oil and coolant
splashes, as well as solid particles
• Encapsulation of the main
components prevents dust,
particles of metal,
spraying liquids
from entering
the caliper
• New electronic
measuring system
protected from liquids
and immune to
magnetic fields
• Specifications consistent
with DIN 862
• Large, 1/4” LC display for easy reading
• Auto shut-off after two hours
• Instant inch/metric conversion
• Power supply: one 3V lithium battery, type CR 2032
• Battery life: approx. 1.5 years
RS-232
Models
Now
Available
SAVE
up to
25%
Catalog No. EDP No. Description List Price Sale Price
00730047 28260 Tesa Hite Magna 400 $0,000.00 $3,163.00 $2,752.00 $0,000.00
00730059 28261 Tesa Hite Magna 700 $0,000.00 $4,035.00 $3,510.00 $0,000.00
Thumb-
Catalog N0. EDP No. Description wheel Range List Price Sale Price
00530300 29726 TESA-Cal IP67 6”/150 mm $179.00 $000.00 $134.00 $000.00
00590301 27679 Dura-Cal IP67 • 6”/150 mm $170.00 $000.00 $128.00 $000.00
00530302 20117 TESA-Cal IP67 • 8”/200 mm $276.00 $000.00 $248.00 $000.00
00530303 20118 TESA-Cal IP67 • 12”/300 mm $408.00 $000.00 $367.00 $000.00
00530311 28466 DURA-CAL IP67 W/RS-232 • 6”/150mm $229.00 $000.00 $206.00 $000.00
00530312 28467 IP67 Digital Caliper W/RS-232 • 8”/200mm $299.00 $000.00 $269.00 $000.00
00530313 28468 IP67 Digital Caliper W/RS-232 • 12”/300mm $489.00 $000.00 $440.00 $000.00
00530251 24749 Small-sized Caliper 0-1”/2-25mm $384.00 $000.00 $346.00 $000.00
with measuring tip

Brown & Sharpe Shop-Cal Digital Calipers
Economical Swiss-made quality and design
The Brown & Sharpe Shop-Cal provides easy-to-read, accurate
measurements of day-to-day operations. Stainless steel
for durable, reliable and accurate measurements.
•
•
•
•
•
•
Absolute and differential measuring system
A large, 1/4” LC display for easy readings
Auto shut-off
Instant inch/metric conversion
Battery life: approx. 1.5 years
Power supply: 3V lithium-battery, type CR 2032
Catalog No. EDP No. Range Resolution List Price Sale Sale Price Price
00590090 20971 0 - 6” / .0005” / 0.01 mm $118.00 $000.00 $86.00 $000.00
0 - 150 mm
INTERAPID LITE Digital Caliper
Lightweight Aluminum
Alloy Frame
SAVE
27%
Brown & Sharpe Dial-Cal ®
Dial Calipers
World’s First & Finest!
• Tough - Anti-backlash,
shock-proof design
• Durable - Covered stainless
steel rack
• Versatile - Measures inside,
outside, depth & step
• Precise - .100”/2mm per revolution
• Reliable - Adjustable zero set
and slide lock
• Easy-To-Read - 1.25” diameter
rotating dial w/lock
SAVE
up to
40%
•
•
•
•
•
Titanium Jaws (O.D.)
12” to 120” Sizes
Patented Inductive
Measuring System
Resolution: .0005”
INCH/METRIC
Conversion
MIN/MAX and
PRESET Functions
•
00590061
Shown
Max.
Catalog EDP Perm. Repeat-
No. No. Range Error ability Description List Price
Sale Price
00590061 23160 12”/330mm 30µm 20µm Interapid light 300 $1,126.00 $0,000.00 $000.00 $1,013.00
00590062 23161 24”/630mm 40µm 20µm Interapid light 600 $1,428.00 $0,000.00 $0,000.00 $1,285.00
00590063 23162 40”/1025mm 60µm 20µm Interapid light 1000 $1,629.00 $0,000.00 $0,000.00 $1,466.00
00590064 23163 60”/1525mm 150µm 20µm Interapid light 1500 $2,721.00 $0,000.00 $0,000.00 $2,449.00
00590065 23164 80”/2040mm 250µm 30µm Interapid light 2000 $3,398.00 $0,000.00 $0,000.00 $3,058.00
00590066 23165 100”/2545mm 350µm 30µm Interapid light 2500 $4,564.00 $0,000.00 $0,000.00 $4,108.00
00590067 23166 120”/3050mm 450µm 40µm Interapid light 3000 $5,097.00 $0,000.00 $0,000.00 $4,587.00
Catalog EDP Smallest Jaw List
Sale
No. No. Description Division Length Price
Price
599-579-4 51774 6” Dial-Cal with Silver Face .001 1.5” $137.00 $000.00 $00.00 $92.00
599-579-5 51879 6” Dial-Cal with Jet Console, .001 1.5” $137.00 $000.00 $00.00 $92.00
Black Face & Orange Hand
599-579-8-1 27594 8” Dial-Cal with Silver Face .001 1.9” $239.00 $000.00 $000.00 $143.00
599-579-8-5-1 27593 8” Dial-Cal with Jet Console, .001 1.9” $239.00 $000.00 $000.000 $143.00
Black Face & Orange Hand
599-579-12-1 27592 12” Dial-Cal with Silver Face .001 2.5” $285.00 $000.00 $000.00 $205.00
599-579-12-5-1 27591 12” Dial-Cal with Jet Console, .001 2.5” $285.00 $000.00 $000.00 $205.00
Black Face & Orange Hand
05.60013 42534 Depth Measuring Foot (6” Only) $49.00 $00.00 $00.00 $44.00
05.60086 27000 Depth Measuring Foot (8” & 12”)
$49.00 $44.00
599-579-200 26908 Centerline Plus Accessory Kit $119.00 $00.00 $00.00 $101.00

Micromaster Digital Micrometers
SAVE
up to
35%
A sleek, ergonomic design and plenty of impressive features, including the new
“capa µ system ® ”, give the Micromaster Digital Micrometer a comfortable
advantage in both form and function.
• Large, easy-to-read 1/4” digital display
• Preset absolute and differential modes
• Battery life: 1 to 2 years normal usage
• Automatic shut-off after 10 minutes
• Meets or exceeds applicable Federal
and DIN standards
• Shop-hardened, fitted case
EDP Water RS-232 List Sale
Catalog No. No. Range Resistant Output Price Price
Digital Electronic Micrometers
599-100 27266 0-1.2”/0-30mm .00016” N N $000.00 $247.00 $000.00 $161.00
599-125 27271 0-1.2”/0-30mm .00016” Y N $000.00 $263.00 $000.00 $197.00
599-125RS 27267 0-1.2”/0-30mm .00016” Y Y $000.00 $269.00 $000.00 $242.00
599-126 27272 1-2”/25-50mm .0002” Y N $000.00 $318.00 $000.00 $286.00
599-126RS 27268 1-2”/25-50mm .0002” Y Y $000.00 $322.00 $000.00 $290.00
599-127 27273 2-3”/50-75mm .0002” Y N $000.00 $330.00 $000.00 $297.00
599-127RS 27269 2-3”/50-75mm .0002” Y Y $000.00 $334.00 $000.00 $301.00
599-128 27274 3-4”/75-100mm .0002” Y N $000.00 $346.00 $000.00 $311.00
599-128RS 27270 3-4”/75-100mm .0002” Y Y $000.00 $368.00 $000.00 $331.00
0-3 Inch Set
06030029 21235 consisting of Y N $0,000.00 $1,110.00 $000.00 $999.00
599-125, 599-126, 599-127
Note: 4” through 12” ranges are also available.
Value-Line Micrometers
Brown & Sharpe micrometers continue as the standard wherever
measuring consistency is vital
Features:
• Satin-chrome thimble
• Spindle lock
• .0001” reading
• Tungsten carbide tipped faces
• Straight-line graduations.
• Fixed/friction thimble
• Black enamel frame
• Meets Federal specifications
Catalog No. EDP No. Range Graduations List Price
Sale Sale Price Price
599-1-44 25943 0 - 1 .0001 in $98.00 $00.00 $83.00 $00.00
599-2-44 25944 1 - 2 .0001 in $108.00 $000.00 $92.00 $00.00
599-3-44 25945 2 - 3 .0001 in $109.00 $000.00 $93.00 $00.00
599-4-44 25946 3 - 4 .0001 in $114.00 $000.00 $97.00 $00.00
599-5-44 25947 4 - 5 .0001 in $120.00 $000.00 $102.00 $00.00
599-6-44 25948 5 - 6 .0001 in $128.00 $000.00 $109.00 $000.00
Metric models also available.Standards are available separately.
Individual wood cases are available for 1 to 4” Value-Line micrometers.
Micrometer Sets
599-181-923 25983 0 - 3 in Without Standards $000.00 List Price Sale $000.00 Price
599-181-923-1 25984 0 - 3 in With Standards $000.00 $392.00 $314.00 $000.00
Metric sets also available.
$427.00 $342.00
0-6”, 0-12”, and 6”-12” Micrometer Sets also available.
ETALON ® 260 Micrometers
• High precision micrometer designed
for fast, easy reading
• Reversible fixed/friction thimble
SAVE
up to
20%
Catalog No. EDP No. Range Graduations Accuracy Parallelism List List Price
Sale Price
71.115899 41565 0 - 1 0.0001 2 1 $182.00 $000.00 $000.00 $160.00
71.115900 41566 1 - 2 0.0001 2 1.5 $287.00 $000.00 $000.00 $253.00
71.115901 41567 2 - 3 0.0001 3 1.5 $315.00 $000.00 $000.00 $277.00
71.115902 41568 3 - 4 0.0001 3 1.5 $343.00 $000.00 $000.00 $302.00

Micromaster Depth Micrometer
Micromaster Intrimik
Easy-to-Read,
Accurate Measurement
of Bore Diameters.
• 3-key functions w/RS-232 data output
• Non-rotating spindle
• Hardened steel measuring foot faces: 100 x 15mm
• Hardened steel meas. rods 3mm dia.
• Measuring span 0-90 w/3 rods, 0-180mm w/6 rods
Catalog EDP Water RS-232 List Sale
No. No. Range Accuracy Resistant Output Price Price
60.30069 27460 0-3.5”/0-90mm .00016” Y Y $000.00 $970.00 $854.00 $000.00
60.30070 27461 0-7”/0-180mm .00016” Y Y $0,000.00 $1,128.00 $993.00 $000.00
IP54 compliant when RS-232 is not being used.
Internal Analog Depth Gage Micrometers
• 1/8 measuring rods
• Friction thimble
• Ring lock
• Hardened precision base
• Satin chrome finish
• Supplied in a fitted Mahogany case
SAVE
up to
25%
EDP No. Base List
Sale
Catalog No. No. Range Graduation Rods Length Price
Price
599-603-123-3 25624 0-3” .001” 3 2.5” $180.00 $000.00 $153.00 $000.00
599-603-143-3 25627 0-3” .001” 3 4” $195.00 $000.00 $146.00 $000.00
599-603-126-3 25625 0-6” .001” 6 2.5” $210.00 $000.00 $168.00 $000.00
599-603-146-3 25628 0-6” .001” 6 4” $235.00 $000.00 $200.00 $000.00
Catalog No. EDP No. Range List Price Sale Price
599-290-35-1 27503 0.240-0.320”/6-8 mm $000.00 $771.00 $678.00 $000.00
599-290-42-1 27504 0.320-0.400”/8-10 mm $000.00 $771.00 $678.00 $000.00
599-290-50-1 27505 0.400-0.480”/10-12 mm $000.00 $771.00 $678.00 $000.00
599-290-60-1 27506 0.430-0.550”/11-14 mm $000.00 $791.00 $696.00 $000.00
599-290-70-1 27507 0.550-0.670”/14-17 mm $000.00 $791.00 $696.00 $000.00
599-290-80-1 27508 0.670-0.790”/17-20 mm $000.00 $791.00 $696.00 $000.00
599-290-100-1 27509 0.790-0.990”/20-25 mm $000.00 $820.00 $722.00 $000.00
599-290-120-1 27510 0.990-1.18”/25-30 mm $000.00 $820.00 $722.00 $000.00
599-290-140-1 27511 1.18-1.38”/30-35 mm $000.00 $881.00 $775.00 $000.00
599-290-160-1 27512 1.38-1.58”/35-40 mm $000.00 $891.00 $784.00 $000.00
599-290-200-1 27513 1.58-1.98”/40-50 mm $000.00 $901.00 $793.00 $000.00
599-290-240-1 27514 1.98-2.36”/50-60 mm $000.00 $930.00 $818.00 $000.00
599-290-280-1 27515 2.36-2.76”/60-70 mm $000.00 $958.00 $843.00 $000.00
599-290-320-1 27516 2.76-3.16”/70-80 mm $000.00 $973.00 $856.00 $000.00
599-290-360-1 27517 3.16-3.55”/80-90 mm $000.00 $989.00 $870.00 $000.00
599-290-400-1 27518 3.55-3.95”/90-100 mm $000.00 $1,015.00 $893.00 $000.00
599-290-420-1 27519 3.95-4.94”/100-125 mm $0,000.00 $1,508.00 $1,327.00 $0,000.00
599-290-440-1 27520 4.94-5.90”/125-150 mm $0,000.00 $1,525.00 $1,342.00 $0,000.00
599-290-460-1 27521 5.90-6.90”/150-175 mm $0,000.00 $1,542.00 $1,357.00 $0,000.00
599-290-480-1 27522 6.90-7.88”/175-200 mm $0,000.00 $1,584.00 $1,394.00 $0,000.00
599-290-500-1 27523 7.88-8.86”/200-225 mm $0,000.00 $1,853.00 $1,631.00 $0,000.00
599-290-520-1 27524 8.86-9.85”/225-250 mm $0,000.00 $1,964.00 $1,728.00 $0,000.00
599-290-540-1 27525 9.85-10.84”/250-275 mm $0,000.00 $2,021.00 $1,778.00 $0,000.00
599-290-560-1 27526 10.84-11.80”/275-300 mm $0,000.00 $2,077.00 $1,828.00 $0,000.00

Micromaster Alesometer
• Internal measuring with 3-line contact
• Specially suited for through and blind bores
Catalog No. EDP No. Range List Price
Sale Price
62.90051 28418 0.2362-0.3150”/6-8 mm $000.00 $1,002.00 $000.00 $882.00
62.90052 28419 0.3150-0.3970”/8-10 mm $000.00 $1,002.00 $000.00 $882.00
62.90023 28420 0.3970-0.4921”/10-12.5 mm $0,000.00 $1,129.00 $000.00 $994.00
62.90024 28421 0.4921-0.5905”/12.5-15 mm $0,000.00 $1,129.00 $000.00 $994.00
62.90025 28422 0.5905-0.6890”/15-17.5 mm $0,000.00 $1,129.00 $000.00 $994.00
62.90026 28423 0.6890-0.7874”/17.5-20 mm $0,000.00 $1,129.00 $000.00 $994.00
62.90027 28424 0.7874-0.9843”/20-25 mm $0,000.00 $1,149.00 $000.00 $1,011.00
62.90028 28425 0.9843-1.1811”/25-30 mm $0,000.00 $1,149.00 $000.00 $1,011.00
62.90029 28426 1.1811-1.3780”/30-35 mm $0,000.00 $1,149.00 $000.00 $1,011.00
62.90030 28427 1.3780-1.5748”/35-40 mm $0,000.00 $1,149.00 $000.00 $1,011.00
62.90031 28428 1.5748-1.9685”/40-50 mm $0,000.00 $1,245.00 $0,000.00 $1,096.00
62.90032 28429 1.9685-2.3622”/50-60 mm $0,000.00 $1,245.00 $0,000.00 $1,096.00
62.90033 28430 2.3622-2.7560”/60-70 mm $0,000.00 $1,333.00 $0,000.00 $1,173.00
62.90034 28431 2.7560-3.3465”/70-85 mm $0,000.00 $1,333.00 $0,000.00 $1,173.00
62.90035 28432 3.3465-3.9370”/85-100 mm $0,000.00 $1,333.00 $0,000.00 $1,173.00
62.90036 28433 3.9370-4.9212”/100-125 mm $0,000.00 $1,697.00 $0,000.00 $1,493.00
62.90037 28434 4.9212-5.9055”/125-150 mm $0,000.00 $1,837.00 $0,000.00 $1,617.00
62.90038 28435 5.9055-6.8897”/150-175 mm $0,000.00 $2,006.00 $0,000.00 $1,765.00
62.90039 28436 6.8897-7.8740”/175-200 mm $0,000.00 $2,146.00 $0,000.00 $1,888.00
62.90040 28437 7.8740-8.8582”/200-225 mm $0,000.00 $2,284.00 $0,000.00 $2,010.00
62.90041 28438 8.8582-9.8425”/225-250 mm $0,000.00 $2,424.00 $0,000.00 $2,133.00
62.90042 28439 9.8425-10.8267”/250-275 mm $0,000.00 $2,563.00 $0,000.00 $2,255.00
62.90043 28440 10.8267-11.8110”/275-300 mm $0,000.00 $2,701.00 $0,000.00 $2,377.00
INTRIMIK Internal Micrometers
with Analog Indication (Inch Models)
Features:
• Intrimik measuring arms move at right angles to the spindle
• Analog reading, with graduations as shown in the table
• Instruments in the range .275” to 4.00”
have hardened steel measuring points (770 HV)
• Instruments in the range 4.00” to 12.00” have
tungsten carbide inserts in the measuring points (1300 HV)
Measuring Depth (in.)
Smallest with Extensions
Catalog No. EDP No. Range Division None One Two List Price
Sale Price
599-281-3 43972 .275 to .350 .0001 2 6 10 $480.00 $000.00 $422.00 $000.00
599-281-4 43974 .350 to .425 .0001 2 6 10 $482.00 $000.00 $424.00 $000.00
599-281-5 43976 .425 to .500 .0001 2 6 10 $485.00 $000.00 $427.00 $000.00
599-281-6 43978 .500 to .600 .0002 3 9 15 $511.00 $000.00 $450.00 $000.00
599-281-7 43980 .600 to .700 .0002 3 9 15 $497.00 $000.00 $437.00 $000.00
599-281-8 43982 .700 to .800 .0002 3 9 15 $509.00 $000.00 $448.00 $000.00
599-281-10 43984 .800 to 1.000 .0002 3 9 15 $543.00 $000.00 $478.00 $000.00
599-281-12 43986 1.000 to 1.200 .0002 3 9 15 $550.00 $000.00 $484.00 $000.00
599-281-14 43988 1.200 to 1.400 .0002 3 9 15 $559.00 $000.00 $492.00 $000.00
599-281-16 43990 1.400 to 1.600 .0002 3 9 15 $566.00 $000.00 $498.00 $000.00
599-281-20 43992 1.600 to 2.000 .0002 3 9 15 $644.00 $000.00 $567.00 $000.00
599-281-24 43994 2.000 to 2.400 .0002 3 9 15 $655.00 $000.00 $576.00 $000.00
599-281-28 43996 2.400 to 2.800 .0002 3 9 15 $694.00 $000.00 $611.00 $000.00
599-281-32 43998 2.800 to 3.200 .0002 3 9 15 $683.00 $000.00 $601.00 $000.00
599-281-36 44000 3.200 to 3.600 .0002 3 9 15 $722.00 $000.00 $635.00 $000.00
599-281-40 44002 3.600 to 4.000 .0002 3 9 15 $708.00 $000.00 $623.00 $000.00
00882701 27011 4.000 to 5.000 .0005 4 10 $1,110.00 $0,000.00 $977.00 $000.00
00882702 27012 5.000 to 6.000 .0005 4 10 $1,144.00 $0,000.00 $1,007.00 $000.00
00882703 20221 6.000 to 7.000 .0005 4 10 $1,174.00 $0,000.00 $1,033.00 $000.00
00882704 20222 7.000 to 8.000 .0005 4 10 $1,208.00 $0,000.00 $1,063.00 $0,000.00
00883201 * 20223 8.000 to 9.000 .0005 4 10 $1,575.00 $0,000.00 $1,386.00 $0,000.00
00883202 * 20224 9.000 to 10.00 .0005 4 10 $1,627.00 $0,000.00 $1,432.00 $0,000.00
00883203 * 20225 10.00 to 11.00 .0005 4 10 $1,679.00 $0,000.00 $1,478.00 $0,000.00
00883204 * 20226 11.00 to 12.00 .0005 4 10 $1,737.00 $0,000.00 $1,529.00 $0,000.00
* Comes with 6” extension in finished wooden case.
Full sets
Catalog No. EDP No. Range List Price
Sale Price
00880100 20214 .275 - .500” $1,486.00 $0,000.00 $1,308.00 $0,000.00
00880400 20215 .500 - .800” $1,627.00 $0,000.00 $1,432.00 $0,000.00
00881200 20216 .800 - 1.600” $2,414.00 $0,000.00 $2,124.00 $0,000.00
00881900 20217 1.600 - 4.000” $4,443.00 $0,000.00 $3,910.00 $0,000.00
00882700 20218 4.000 - 8.000” $5,913.00 $0,000.00 $5,203.00 $0,000.00
10 11

Rinseable Bore Gage
Eliminate time spent cleaning bore gages.
The rinseable bore gage from Standard Gage can be
cleaned without disassembly. The plunger mechanism is
completely immersible, making it as easy to clean as
it is to use.
• Balanced and lightweight for greater sensitivity and less operator fatigue
• Excellent stability in holding mastered value
• Tungsten carbide contacts
• Measuring range: 2 in - 8 in / 50 mm - 200 mm
• Dial Indicator is shock-proof and is available in a choice of graduations.
The mechanism is protected by a cast housing
• Up to 36 in extensions available
• Supplied in black carrying case
Catalog No. EDP No. Range List Price Sale Sale Price Price
B3-12509 87618 .0001 in $0,000.00 $1,395.00 $1,256.00 $0,000.00
B3-14509 87621 .0005 in $0,000.00 $1,386.00 $1,247.00 $0,000.00
B3-17509 87620 .005 mm $0,000.00 $1,386.00 $1,247.00 $0,000.00
B3-18509 87619 .002 mm $0,000.00 $1,568.00 $1,411.00 $0,000.00
ETALON PISTOL GRIP
Bore Gages
Self-aligning and self-centering bore gages
with 3-line contact. All ROCH ALESOTEST
are designed for measuring not only blind
bores, but also through bores, as well
as short centering shoulders, except
for the models covering the
application ranges from
.236 in - 3.936 in / 6 to 10mm.
• Built for strength, these bore gages are ideally suited
for part series inspection on the production floor
SAVE
10%
Includes
DIGICO II
Digital
Indicator
Catalog No. EDP No. Range List Price Sale Price
62.90080 28931 .236-.394 / 6-10 $1,665.00 $0,000.00 $1,499.00 $0,000.00
62.90081 28932 .394-.787 / 10-20 $2,490.00 $0,000.00 $2,241.00 $0,000.00
62.90082 28933 .787-1.575 / 20-40 $2,859.00 $0,000.00 $2,573.00 $0,000.00
62.90083 28934 1.575-2.756 / 40-70 $3,006.00 $0,000.00 $2,705.00 $0,000.00
62.90084 28935 2.756-3.936 / 70-100 $3,224.00 $0,000.00 $2,902.00 $0,000.00
TESA VERIBOR Light Bore Gage
Perform 2-point measurements on bores from .70” to 5.90” using the
VERIBOR Light. Detect form and shape deviations. Virtually clearance free
circular articulation ensures high repeatability. Invar stall shaft prevents hand
warmth transfer from affecting the measured result. Centering shoe
assures the correct alignment of the gage into the bore being inspected.
Hardened steel ball tips offer high resistance to wear.
Includes a
Standard Gage
AGD 2
Indicator.
VERIBOR LIGHT .70” - 5.90”
model shown
.001” Accuracy
A $186.00
.0005” Accuracy Value
A $128.00
.0001” Accuracy Value
A $157.00
Value
Catalog No. EDP No. Description List Price Sale Price
VERIBOR Light with Standard Gage .0001” Indicator
05790090PA 42031 VERIBOR LIGHT .70” - 1.37” with D1-20241A $518.00
$466.00
05790091PA 42032 VERIBOR LIGHT 1.37” - 2.36” with D1-20241A $508.00 $457.00
05790092PA 42033 VERIBOR LIGHT 1.96” - 5.90 with D1-20241A $570.00 $513.00
05790093PA 42034 VERIBOR LIGHT .70” - 5.90” with D1-20241A $897.00 $807.00
VERIBOR Light with Standard Gage .0005” Indicator
05790090PB 42035 VERIBOR LIGHT .70” - 1.37” with D1-20226A $418.00 $376.00
05790091PB 42036 VERIBOR LIGHT 1.37” - 2.36” with D1-20226A $408.00 $367.00
05790092PB 42037 VERIBOR LIGHT 1.96” - 5.90 with D1-20226A $470.00 $423.00
05790093PB 42038 VERIBOR LIGHT .70” - 5.90” with D1-20226A $797.00 $717.00
VERIBOR Light with Standard Gage .001” Indicator
05790090P 29457 VERIBOR LIGHT .70” - 1.37” with D1-20211A $418.00 $376.00
05790091P 29458 VERIBOR LIGHT 1.37” - 2.36” with D1-20211A $408.00 $367.00
05790092P 29459 VERIBOR LIGHT 1.96” - 5.90 with D1-20211A $470.00 $423.00
05790093P 29479 VERIBOR LIGHT .70” - 5.90” with D1-20211A $797.00 $717.00
12 13

TESA DIGICO 205
Digital Electronic
Indicator
Standard Gage AGD Indicators
SAVE
25%
The only electronic indicator
that fully conforms with
DIN requirements.
• Dimensions according to DIN 878
• ABSOLUTE measuring mode
• Combined analog/digital display
• Mechanical tolerance markers
• OPTO-RS data output
• Auto-reverse and lockable keypad
• Inspection report included
• Swiss made
20%
OFF
The industry’s most popular
AGD indicator sizes
Catalog No. EDP No. Range (IN/MM) Resolution Measuring
01990230 39676 .5”/12.5mm (IN/MM) Force (N)
0.01”/.0005mm < 2.0
List Price Sale Price
$244.00 $195.00
D1-20261A
TESA IP65 Electronic Dial Test Indicators
(Lever-Type)
All the mechanical advantages of a
dial test indicator, with a digital reading
and a durable IP65 compliant design
• Patented inductive measuring system
• Analog and numerical indication
• Numerical interval .0005/.00005 in / 0.01/0.001 mm
• Selectable scale division: 10, 20, 50 µm/1, 2, 5 µm
• IP65 compliant – Water and coolant resistant
• Inch/metric conversion
• RS-232 data output combined with external power supply
• Displayed measuring modes (NOR/MIN/MAX/MAX-MIN)
• Automatic shut down
• Compatible with all TESATAST accessories
Catalog No. EDP No. Range Dial Diam. Measuring Force:
N(±15%)
01830001 29015 .030” .0005”/.00005” 1”
01830002 29016 .020” .0005”/.00005” 1.45”
List Price Sale Price
$389.00 $350.00
$470.00 $423.00
D1-23226A
D1-21221F
Catalog EDP AGD Dial Dial List
Sale
No. No. Group Range Reading Diam Marking Price
Price
Regular Models
D1-20141A 33638 1 .025” .0001” 1.75 0-5-0 $000.00 $259.00 $000.00 $194.00
D1-20241A 33836 2 .025” .0001” 2.25 0-5-0 $000.00 $209.00 $000.00 $157.00
D1-20126A 33611 1 .075” .0005” 1.75 0-15-0 $000.00 $283.00 $000.00 $212.00
D1-20226A 33786 2 .075” .0005” 2.25 0-15-0 $000.00 $171.00 $000.00 $128.00
D1-20111A 33557 1 .250” .001” 1.75 0-50-0 $000.00 $248.00 $000.00 $186.00
D1-20211A 33705 2 .250” .001” 2.25 0-50-0 $000.00 $248.00 $000.00 $186.00
Long-Range Indicators
D5-21221F 86002 2 1.00” .0005” 2.25 0-50 $000.00 $169.00 $000.00 $127.00
1-Rev Indicators
D1-23226A 86006 2 .020” .0005” 2.25 0-10-0 $000.00 $283.00 $000.00 $212.00
D1-23241A 34018 2 .008” .0001” 2.25 0-4-0 $000.00 $223.00 $000.00 $167.00
Metric Indicators
D1-20261A 33857 2 2.5mm 0.01 mm 2.25 0-50-0 $000.00 $240.00 $000.00 $180.00
D1-20281A 33886 2 0.5mm 0.002 mm 2.25 0-10-0 $000.00 $209.00 $000.00 $157.00
14 15

AGD 2 Indicators
2-1/4” Diameter Dial
The AGD 2 series of dial indicators
are the most popular indicators in the
Brown & Sharpe range. All models are
supplied with a revolution counter,
tolerance pointers, central lug back and
ball contact tip as standard.
Alternative flat and slide backs
are available as accessories.
Catalog EDP
No. No. Series Travel per rev. List Price
Sale Price
14.82022 26862 MW216 0.10in $00.00 $93.00 $84.00 $00.00
14.82023 26863 MB216 0.10in $00.00 $93.00 $84.00 $00.00
SAVE
10%
10%
OFF
Standard Gage IP54
Indicators
IP54 – Waterproof protection
(Norm IEC 60529)
Fully protected against the penetration
of liquid or solid contaminants. Dust,
particles of metal, spraying water
or oil are prevented from entering
the indicator.
• Corrosion resistant
• High performance, shock-proof design
• Hardened steel contact point
• Vertical centered lug back
• Balanced dial reading
• Revolution counter
• Tolerance pointers
Catalog No. EDP No. Range Marking List Price Sale Price
D2-29111F-W 28629 .100 in 0-50-0 $336.00 $000.00 $302.00 $000.00
D2-29228F-W 28630 .050 in 0-25-0 $336.00 $000.00 $302.00 $000.00
BESTEST ®
Dial Test Indicators
- Black Face Models
with Orange Hand
Easy-to-read, satin black,
“jet-console” face
BesTest ® Indicators with
high visibility orange
hand. Each BesTest ®
Indicator set comes
complete with one carbide
tip contact point, .080”
diameter; one 1/2” long x .250”
diameter extension with dovetail; one contact
point wrench; one durable molded case and certifcate
of accuracy and traceability.
• Easy-to-read “jet-console” face w/high
visibility orange hand
• Constant clockwise rotation
• Automatic reversal
• Swivelling point
2 Brown & Sharpe
Ball Contact Points
An $88.00 Value
• Carbide tip point
• Universal mounting
• Monoblock (Precision Watch) body design
• Anti-magnetic and corrosion resistant
• Includes fitted case
Catalog EDP Smallest Dial Point Tip List
Sale
No. No. Range Marking Division Dia. Length Dia. Price
Price
599-7029-5 51732 .030” 0-15-0 .001” 1” 1/2” .080” $146.00 $000.00 $117.00 $000.00
599-7030-5 51733 .030” 0-15-0 .0005” 1” 1/2” .080” $148.00 $000.00 $118.00 $000.00
599-7031-5 51734 .030” 0-15-0 .0005” 1-1/2” 1/2” .080” $165.00 $000.00 $124.00 $000.00
599-7032-5 51737 .008” 0-4-0 .0001” 1” 1/2” .080” $199.00 $000.00 $149.00 $000.00
599-7033-5 51738 .008” 0-4-0 .00005” 1-1/2” 1/2” .080” $210.00 $000.00 $158.00 $000.00
599-7034-5 51735 .020” 0-10-0 .0005” 1” 1-7/16” .080” $184.00 $000.00 $138.00 $000.00
599-7035-5 51736 .020” 0-10-0 .0005” 1-1/2” 1-7/16” .080” $202.00 $000.00 $152.00 $000.00
FREE With
Proof of
Purchase
SAVE
up to
25%
Send proof of purchase to
Brown & Sharpe, Inc.
TESA Division
“Free Contact Points Program”
250 Circuit Dr.
N. Kingstown, RI 02852-1700
16 17

INTERAPID Dial Test Indicators
• Magnetic resistant
• Two-way action – no reversing lever
• Dovetail and adjustable stem adaption
• Carbide contact point swivels 210°
• Extremely low measuring pressure
• Ball bearing and jewelled movement
• Precise repetitive readings
• Easy-to-read tilted dial
• With revolution counter
EDP Dial Dial List Sale
Catalog No. No. Series Range Grad. Dia. Reading Price Price
Vertical Models
74.111377 41685 312b-1V .060” .0005” 1.5” 0-15-0 $000.00 $245.00 $216.00 $000.00
74.111378 41686 312b-2V .060” .0005” 1.0” 0-15-0 $000.00 $239.00 $210.00 $000.00
74.111379 41687 312b-20V .060” .001” 1.0” 0-15-0 $000.00 $223.00 $196.00 $000.00
74.111957 41714 312b-3V .016” .0001” 1.5” 0-4-0 $000.00 $297.00 $261.00 $000.00
74.111958 41715 312b-15V .060” .0005” 1.5” 0-15-0 $000.00 $316.00 $278.00 $000.00
Horizontal Models — for measurement at 12°
74.111370 42775 312b-1 .060” .0005” 1.5” 0-15-0 $000.00 $228.00 $201.00 $000.00
74.111371 86150 312b-2 .060” .0005” 1.0” 0-15-0 $000.00 $226.00 $199.00 $000.00
74.111372 41680 312b-3 .016” .0001” 1.5” 0-4-0 $000.00 $284.00 $250.00 $000.00
74.111373 41681 312b-4 .016” .0001” 1.5” 0-4-0 $000.00 $280.00 $246.00 $000.00
74.111374 41682 312b-20 .060” .001” 1.0” 0-15-0 $000.00 $223.00 $196.00 $000.00
74.111965 41716 312b-15 .060” .0005” 1.5” 0-15-0 $000.00 $245.00 $216.00 $000.00
Metric Model
74.111375 41683 312-1V 0.01mm 1,6mm 37.5mm 0-40-0 $000.00 $315.00 $277.00 $000.00
Contact Points —
Catalog No. EDP No. Tip Dia.Length
List
Price
Sale
Price
74.105996 41647 .080” 11/16” $17.90 $00.00 $15.60 $00.00
74.105997 41648 .060” 11/16” $17.90 $00.00 $15.60 $00.00
74.105998 41649 .031” 11/16” $17.90 $00.00 $15.60 $00.00
74.111492 41698 .080” 1-3/4” $32.00 $00.00 $28.00 $00.00
74.111493 41699 .031” 1-3/4” $32.00 $00.00 $28.00 $00.00
74.111912 41712 .100” 2-3/4” $24.00 $00.00 $21.00 $00.00
74.111913 41713 .080” 2-3/4” $24.00 $00.00 $21.00 $00.00
Accessories —
Catalog No. EDP No. Description
List
Price
Sale
Price
74.106331 41651 Height Gage Bar $52.00 $00.00 $46.00 $00.00
74.106353 86268 Holding Pin $12.40 $00.00 $10.30 $00.00
74.106931 41656 Axial Support (Inch) $56.00 $00.00 $50.00 $00.00
74.108603 41663 Universal Clamp $32.00 $00.00 $28.00 $00.00
Ultra Wee-Vee Blocks
Unique universal holding tool for small, miniature or intricate parts.
Ideal holding fixture for grinding/indexing punches and pins,
drilling, milling, EDM, and inspection on optical comparators.
Complete set
Catalog No. EDP No.
599-749-100 26913
Optional accessory – Extra Clamp
99-749-101 88128
List Price
$184.00
$18.30
Sale Price
$166.00
$14.60
Toolmaker’s Vise
Handy for use in drilling, fitting and laying out work on
surface plates. Tongue on large jaw slides in groove in
base and is held in place by a strap that prevents jaw
from lifting. 1-15/16” capacity. Furnished with two
steel jaws as shown.
Catalog No. EDP No.
599-752-3 51852
Capable of holding parts
as small as .030” diameter!
List Price Sale Price
$134.00 $121.00
Precision Toolmaker’s Vise
The ultimate in precision vises offering unlimited uses.
Precision ground and hardened to RC 58-62. The movable
jaw with ground horizontal and vertical vees pulls onto the
base at 45° to 60°. This ensures maximum holding power
and holddown force and eliminates tilting and lifting.
Catalog No. EDP No. Dimensions (in) Capacity (in) List Price
Sale Price
599-9225-5 26972 5-7/8 x 2 x 2 3-1/4 $525.00 $420.00
Square and parallel within .0002 in
Toolmaker’s Clamps
Steel, case hardened. Ends of jaws chamfered for clamping
under shoulder or in recess. Clip holds loose jaw in position
when clamp screw is released, a convenient and original
Brown & Sharpe feature.
Catalog No. EDP No. Jaws Open (in) Length Jaws (in) List Price
Sale Price
599-754-8-2 28314 1-1/4 2-1/8
$37.00 $30.00
599-754-12-2 28315 2-1/4 2-3/4
$39.00 $31.00
599-754-20-2 28316 2-3/4 4
$15.20 $12.20
599-754-28-2 28317 3-1/2 5
$26.00 $21.00
18 19

Ultra Thin Parallel Set
Set of 10 pairs. Supplied in custom molded case
• Made from high-grade alloy steel, hardened and
ground from 1/32” stock with 2 holes in
each parallel
• 10 pairs, 6” length, 1/32” width
• 1/2”, 5/8”, 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4”,
1-3/8”, 1-1/2”, 1-5/8”
• Height specifications relate to consistency
within each pair. Absolute heights are nominal
Catalog No. EDP No. Length List Price
Sale Price
599-921-20 26884 1/32”W x 6”L $000.00 $150.00 $000.00 $120.00
Ultra Precision Parallel Set
Set of 10 pairs. Supplied in custom
molded case
• Made from high-grade alloy steel, hardened and
ground from 1/8” stock with 2 holes in each parallel
• 10 pairs, 6” length, 1/32” width
• 1/2”, 5/8”, 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4”, 1-3/8”,
1-1/2”, 1-5/8”
• Height specifications relate to consistency within each pair.
Absolute heights are nominal
Catalog No. EDP No. Length List Price
Sale Price
599-921-10 86615 1/8”W x 6”L $000.00 $272.00 $000.00 $218.00
Steel Parallel Set
Set of 9 pairs. Supplied in custom molded case
• Made from high-grade alloy steel, hardened and ground
from 1/4” stock with 2 holes in each parallel
• 9 pairs, 6” length, 1/4” width
• 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4”, 1-3/8”, 1-1/2”,
1-5/8”, 1-3/4”
• Height specifications relate to consistency within each pair
• Absolute heights are nominal
Catalog No. EDP No. Length List Price Sale Price
599-921-4 26882 1/4”W x 6”L $000.00 $327.00 $262.00 $000.00
SAVE
20%
Universal 1-2-3 Block Set
Universal 1-2-3 Blocks Set Consisting of a matched pair
of 1”x 2” x 3” blocks, five plated 5/16-18 socket head
cap screws and a hex key wrench.
• “Shop-hardened” molded case
• Each block is precision ground and case
hardened on all 6 surfaces
• Surface finish 6 to 16 microinches
• Squareness on all sides to .0001”
• There are a total of 11 holes on three faces Five 5/16 - 18 tapped holes arranged for
holding down and for conversion to an angle plate. Six holes drilled through with deep
recesses for easy clamping
• Blocks are oversized to allow for normal lapping to .0003”
Catalog No. EDP No. List Price
Sale Price
599-750-50 27396 $87.00 $00.00 $64.00 $00.00
Ultra Precision Ground
1-2-3 Blocks Set
Supplied in custom molded case.
Ideal for precision layout and setup.
• Each block is ground and case hardened on all six surfaces
• Surface finish 6 to 16 microinches
• Squareness on all sides to .0001”
• 23 holes: 5 tapped 3/8-16
• Oversized to allow for normal tapping .0001” - .0003”
• Case hardened to 50-60 HRC
• Set consists of a pair of 1x2x3 inch blocks, five 3/8-16 stainless steel socket head
cap screws and a hex key wrench
Catalog No. EDP No. List Price Sale Sale Price Price
599-750-10 26764 $73.00 $00.00 $55.00 $00.00
Adjustable Parallel Sets
Used for checking, marking, or positioning work.
Tapped Holes
• Clamp screws lock parallels to size
• Handy gages for measuring inside dimensions of recesses or slots, or for setting tools
Catalog EDP
No. No. Range No. of Parallels List List Price Price Sale Price
599-673-10 44515 3/8” to 1-5/16” 4 $101.00 $00.00 $77.00 $00.00
599-673-20 44516 3/8” to 2-1/4” 6 $149.00 $000.00 $112.00 $000.00
20 21

Ultra Precision Wavy Parallel Set
Ultra Precision Wavy Parallel Set reliable and precise vertical positioning
of workpieces.
• Parallel within ±.0002” — paired ±.0002”
• Made of high quality spring steel, hardened, stress
relieved and precision ground
• Includes 9 pairs 4-1/4” in length, with the
following heights: 1/2”, 5/8”, 3/4”, 7/8”, 1”,
1-1/8”, 1-1/4”, 1-3/8”, 1-1/2”
• Shims can be compressed, which is useful in the
holding thin parts
• Complete with fitted wooden case
Catalog No. EDP No. List Price Sale Price
599-921-25 27279 $147.00 $142.00 $110.00 $107.00
Ultra Precision 12-Piece Angle Block Set
Complete with a protective
“shop-hardened” molded case.
• Precision ground hardened steel
• Angular accuracy .0001” per inch, ± 30 arc seconds
• 3” long x 1/4” thick
• Simple, quick angle setups
• Eliminate calculations and avoid errors
• Complete set of 12 blocks: 1/4°, 1/2°, 1°, 2°, 3°, 4°,
5°, 10°, 15°, 20°, 25°, 30°
Catalog No. EDP No. List Price
Sale Sale Price
599-921-18 26883 $215.00 $000.00 $161.00 $000.00
Workshop Square Set
Complete in a shop-hardened, protective
molded case!
• Squareness of the blade edge to the
working face of stock is .0006”
Catalog No. EDP No. Description Blades List Price
Sale Price
599-540-246 27061 3-Pc. Square Set 2”, 4”, & 6” $72.00 $00.00 $00.00 $55.00
599-540-2346 27060 4-Pc. Square Set 2”, 3”, 4”, & 6” $90.00 $00.00 $00.00 $68.00
Edge Finders & Audible Edge Finders
• Available in three sizes: 1/2”, 3/8”, and 10mm
• Hardened and ground on all working surfaces
Audible Edge Finders
help assure accuracy by
releasing an audible click
when the tip jumps.
This allows the operator
to listen as well as
watch the tool.
SAVE
up to
27%
Catalog No.
Edge Finders EDP No. End Size List Price
Sale Sale Price
599-792-2 27030 S 3/8” x .200” $13.10 $00.90 $10.30 $0.00
599-792-3 27031 S 1/2” x .200” $12.30 $00.00 $9.30$00.00
599-792-4 27032 D 3/8” x .200” $13.10 $00.00 $10.30 $00.00
599-792-5 27033 D 1/2” x .200” $16.50 $00.00 $12.40 $00.00
599-792-11 27036 S 10mm x .375 x 10mm $17.00 $00.00 $12.40 $00.00
599-792-12 27037 S 10mm x 10mm $14.70 $00.00 $11.30 $00.00
599-792 44595 S 1/2” x .500” $14.70 $00.00 $11.30 $00.00
Audible Edge Finders
599-792-20 27038 S 3/8” x .200” $14.70 $00.00 $11.30 $00.00
599-792-21 27039 S 1/2” x .200” $15.50 $00.00 $11.30 $00.00
599-792-22 27040 S 10mm x .375” x 10mm $17.00 $00.00 $12.40 $00.00
599-792-23 27041 S 10mm x 10mm $17.00 $00.00 $12.40 $00.00
599-792-24 27042 S 1/2” x .500” $15.50 $00.00 $11.30 $00.00
Edge Finder Set
599-792-9 28447 1/4”, 3/8”, 1/2”, 3/4” $55.00 $00.00 $47.00 $00.00
Audible Edge Finder Set
599-792-19 28448 1/4”, 3/8”, 1/2”, 3/4” $64.00 $00.00 $54.00 $00.00
S = single, D = double
22 23

Telescoping Hole Gages
Satin-chrome finish
Completely assembled with handle.
Knurled lock maintains the setting of
the measuring arms to permit sizing
with a micrometer or caliper.
4 Piece Set:
• Range: 5/16” to 2-1/8” diameter
6 Piece Set:
• Range: 5/16” to 6” diameter
Catalog No. EDP No. Description Range List Price
Sale Sale Price Price
599-591-10 45368 4 Piece Set 5/16” to 2-1/8” dia. $101.00 $00.00 $77.00 $00.00
599-591-20 45369 6 Piece Set 5/16” to 6” dia. $134.00 $000.00 $101.00 $00.00
Sine Bar Riser Kit and Value-Line 5”
Quickly measure the desired angle
in a machine setup
Sine Bar:
• 5”, hardened and precision ground
• 1” body size, top parallel to bottom
of rods within .0002”
Risers:
• 18 risers from 1/2° to 15°, 1/4°
and 1/2° T.P.F.
• Exact constant within .0001
Combination Square Sets
Industry’s most versatile tool
Combination squares are commonly used for
layout, setup, checking heights and
depths and setting angles. They are
also often used as try squares, center
gages, bevel protractors and rules.
• Square heads and protractors
are supplied with levels
• Square heads also include a hardened steel scriber
• Square heads and center heads are made from hardened steel
• Inch, metric or inch/metric reading combination squares are available
Components may be purchased separately.
EDP Blade List List Sale
Catalog No. No. Size Includes Price Price Price
599-400-1204-1 44159 12” Square Head (Hardened) $139.00 $000.00 $000.00 $104.00
Center Head (Hardened)
599-438-1204-1 44193 12” Square Head (Hardened) $220.00 $000.00 $000.00 $165.00
Center Head (Hardened)
Protractor (Reversible)
Satin Chrome Blade.
All blades graduated in, 8ths, 16ths, 32nds, and 64ths.
Protractor Square Inclinometer
Catalog No. EDP No.
53.31300 87190 40x90° 1° 17 – 17’ 180 x 22 15-55
List Price Sale Price
$778.00 $699.00
Protractor Spirit
Inclinometer
Catalog No. EDP No. Description List Price Sale Price
598-291-600 27264 Sine Bar Riser Kit $177.00 $000.00 $133.00 $000.00
598-291-500 29686 5” Sine Bar (only) $54.00 $00.00 $39.00 $00.00
Catalog No. EDP No.
Square model with fine adjust device for the pivoting vial
List Price Sale Price
53.31150 88138 90° 10’ 1’ 50 x 40 19-108 $2,301.00 $2,071.00
Model with frame and fine adjust device for the turning vial
53.31700 86729 2 x 180° 3’ 1’ 150 x 40 19-108 $2,314.00 $2,083.00
24 25

TESA ® Spirit Levels
Tubular spirit levels with a prismatic measuring face, Ω-shaped
Catalog No. mm/m mm For Shafts mm mm
53.31650 1.0 100 x 30 17 – 80 32
53.31651 0.3 100 x 30 17 – 80 32
53.31652 0.3 150 x 30 17 – 80 32
53.31653 0.3 200 x 30 17 – 80 32
Tubular spirit levels with a flat measuring face
53.31250 0.1 80 x 9 ø 16
53.31251 0.3 80 x 9 ø 16
53.31252 0.1 100 x 10 ø 20
53.31253 0.3 100 x 10 ø 20
53.31254 0.05 150 x 11 ø 22
53.31255 0.1 150 x 11 ø 22
53.31256 0.3 150 x 11 ø 22
53.31257 0.05 200 x 12 ø 22
53.31258 0.1 200 x 12 ø 22
53.31259 0.3 200 x 12 ø 22
Transmission shaft spirit levels with side viewing slots
53.31350 28712 0.05 100 x 30 17 – 80
53.31351 29303 0.3 100 x 30 17 – 80
53.31352 0.1 200 x 30 17 – 80
Precision Spirit Level,
Magnetic Square Model
For inspecting and aligning flat and cylindrical surfaces
in horizontal orvertical position –
Attaches magnetically on flat and cylindrical surfaces
– Fitted with insulating handle.
List Price
SAVE
10%
Sale Price
$285.00 $257.00
$295.00 $266.00
$330.00 $297.00
$414.00 $373.00
$271.00 $244.00
$259.00 $233.00
$285.00 $257.00
$271.00 $244.00
$389.00 $350.00
$319.00 $287.00
$295.00 $266.00
$453.00 $408.00
$389.00 $350.00
$330.00 $297.00
$613.00 $552.00
$453.00 $408.00
$732.00 $659.00
TESA ® ClinoBEVEL 1 USB
Versatile inclinometer with large, easy-to-read
LCD display. Comes complete with USB Cable
and ClinoBEVEL software, providing added
value and versatility.
•
•
•
•
•
•
•
Calculate inclinations in direct or comparative mode.
Export calculations to ClinoBEVEL software for
analysis and reporting.
Reinforced aluminum housing
Measuring Range: ±45°
Accuracy: 2’ + 1 digit
Dimensions: 3.94” x 2.95” x 1.18” (100mm x 75mm x 30mm)
Calibration report included.
Catalog No. EDP No.
05330203 36119 TESA ClinoBEVEL 1 USB
Optional ClinoBEVEL Zapper Remote Control
05360014 36702
47.68002 42748 4 batteries, type LRC 6 - 1.5 V, AA
TESA ® ClinoBEVEL 2
Electronic Inclinometer
The top model among inclinometers –
Measuring range ± 45° with angle or inclination
display – Integrated temperature compensation
– Microprocessor controlled auxiliaries for
display setting and inclinometer adjusting –
Instrument output split for comparative
measurements etc.
List Price Sale Price
$1,613.00 $1,452.00
$995.00 $896.00
$9.10 $8.60
Catalog No. EDP No.
List Price Sale Price
53.30202 28798 TESA ClinoBEVEL 2 ±45° >5” 150 $2,953.00 $2,805.00
Optional accessories
47.68002 42748 4 batteries, type LRC 6 - 1.5 V, AA $9.10 $8.60
Catalog No. EDP No. mm/m mm For Shafts mm
53.31000 27498 0.02 150 x 40 19 – 108
05331001 21138 0.04 150 x 40 19 – 108
53.31002 86594 0.05 150 x 40 19 – 108
List Price Sale Price
$1,647.00 $1,482.00
$1,447.00 $1,302.00
$1,320.00 $1,188.00
26 27

Order Yours Today!
The 2008
Advanced Metrology Brochure
Order # PMI-919
World Headquarters
250 Circuit Dr., North Kingstown, RI 02852-1700
Tel: (800) 283-3600, select option 2, then option 3
Fax: (401) 886-2553
www.brownandsharpe.com
As Brown & Sharpe is constantly improving the design of its products, the appearance,
specifications, dimensions and weights are subject to change without notice.
©2008 Brown & Sharpe, Inc., All Rights Reserved.
PMI-918 3/08