Measuring Stands / TESA - Swiss Instruments Ltd
Measuring Stands / TESA - Swiss Instruments Ltd
Measuring Stands / TESA - Swiss Instruments Ltd
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Measuring</strong> <strong>Stands</strong><br />
Length stop<br />
For use with cross beam 16.40416 associated with center<br />
or vee supports. A probe can be mounted instead of the stop pin.<br />
16.40417 40477<br />
Center supports<br />
For axial and radial run-out inspection. Max. width of points:<br />
6.1". Feature solid and hollow points movable longitudinally.<br />
Fitted with spring but lockable. For use with cross beam 16.40416<br />
Supplied in pairs.<br />
16.40414 40474 2<br />
Height of points<br />
in<br />
✓<br />
Double probe holder<br />
.315" dia. clamping bore for 2 electronic<br />
probes. Mounted on the measuring<br />
stand with 2 shafts having a .24" dia.<br />
Laterally<br />
in<br />
16.40401 40463 .5 x 3.25<br />
Limit stop<br />
Mounted with clamp on the column.<br />
Hardened, dull-chrome plated.<br />
16.40403 40465 2.7 x .8<br />
Resting Face<br />
in<br />
Stop plate<br />
For use with the limit stop 16.40403.<br />
Hardened, dull-chrome plated.<br />
16.40402 40464 120°<br />
Vee<br />
Recess<br />
Rack and pinion slide<br />
For vertical adjustment of the measuring arm.<br />
Travel<br />
in<br />
16.40419 40479 7.625<br />
G-19
Change language