Measuring Stands / TESA - Swiss Instruments Ltd

Measuring Stands
Standard measuring table
Hardened steel. Two measuring faces
with dust grooves, lapped. One face has
a .5" wide strip along the center.
✓
in
16.40405 40467 1.75 x 3.75 1
μm
Measuring table with probe holder
Features a .315" dia. mounting bore for
axial probe. Hardened and lapped measuring
face with dust grooves as well
as a .51" wide strip along the center.
in
16.40410 40471 1.75 x 3.75 1
μm
Side table
To be mounted sideways on both
measuring tables. Made of black plastic,
supplied in pairs.
Resting Face
in
16.40404 40466 2.125 x 3.75
Large measuring table with probe holder
Features a .315" dia. mounting bore for
axial probe. Hardened and lapped measuring
face with dust grooves as well
as a .63" wide strip along the center.
in
16.40411 40472 4.75 x 4.75 1.5
μm
Cross beam
For center and vee supports.
Made from cast iron and ground.
16.40416 40476 12
Length
in
G-18
Resting stand
For cylindrical or conical part elements.
Resting plates with tungsten carbide
pins for adaptation to the part diameter.
Distance between plates: ≤ 12".
For use with cross beam 16.40416.
Supplied in pairs.
16.40415 40475 ≤ 1.2
in
Vee blocks
Support parts on tungsten carbide pins.
Distance between blocks: ≤ 11.25". With
length stop. For use with cross beam
16.40416. Supplied in pairs.
in
16.40418 40478 ≤ 1.6 108°