Measuring Stands / TESA - Swiss Instruments Ltd
Measuring Stands / TESA - Swiss Instruments Ltd Measuring Stands / TESA - Swiss Instruments Ltd
Measuring Stands ✓ Heavy cast iron base with mounted steel column, ground (2" in.) Measuring arm with a .315" dia. clamping bore and 2 mounting bores for UPZ6 Fine adjustment using the protected knob with .04" travel Base and measuring arm in cast iron. Dull-chrome plated steel column. Large Measuring Stand These two measuring stands provide different heights, as well as a wide range of accessories that serve for setting up a variety of measuring configurations. These high-precision components are remarkably stable and wear-resistant. They guarantee minimum measurement errors for state-of-the-art factory shop floors. Both stands enable electronic probes to be mounted, especially for direct, sum or comparative measurements. ø.25" ø2" sensor Supplied without 15" / 30" Suited carrying case Declaration of conformity 0 - 6.1" / 21" ø.315" 2.75" 7.5" x 6.7" INTERAPID Universal Stands UP (without measuring table) Heavy cast iron models. Measuring arm with locking feature and brake stop. in 16.39041 28396 Measuring stand 6.25 30 16.39042 28397 Measuring stand 21 42 lbs G-17
Measuring Stands Standard measuring table Hardened steel. Two measuring faces with dust grooves, lapped. One face has a .5" wide strip along the center. ✓ in 16.40405 40467 1.75 x 3.75 1 μm Measuring table with probe holder Features a .315" dia. mounting bore for axial probe. Hardened and lapped measuring face with dust grooves as well as a .51" wide strip along the center. in 16.40410 40471 1.75 x 3.75 1 μm Side table To be mounted sideways on both measuring tables. Made of black plastic, supplied in pairs. Resting Face in 16.40404 40466 2.125 x 3.75 Large measuring table with probe holder Features a .315" dia. mounting bore for axial probe. Hardened and lapped measuring face with dust grooves as well as a .63" wide strip along the center. in 16.40411 40472 4.75 x 4.75 1.5 μm Cross beam For center and vee supports. Made from cast iron and ground. 16.40416 40476 12 Length in G-18 Resting stand For cylindrical or conical part elements. Resting plates with tungsten carbide pins for adaptation to the part diameter. Distance between plates: ≤ 12". For use with cross beam 16.40416. Supplied in pairs. 16.40415 40475 ≤ 1.2 in Vee blocks Support parts on tungsten carbide pins. Distance between blocks: ≤ 11.25". With length stop. For use with cross beam 16.40416. Supplied in pairs. in 16.40418 40478 ≤ 1.6 108°
- Page 1 and 2: Measuring Stands 60 INTERAPID ® Sm
- Page 3 and 4: Measuring Stands INTERAPID ® Magne
- Page 5 and 6: Measuring Stands Medium Size Magnet
- Page 7 and 8: Measuring Stands MITI-MITE Magnetic
- Page 9 and 10: Measuring Stands Indicator Holder -
- Page 11 and 12: Measuring Stands Universal Measurin
- Page 13 and 14: Measuring Stands Comparator Stands
- Page 15: Measuring Stands Small Measuring St
- Page 19 and 20: Measuring Stands Black Granite Plat
- Page 21 and 22: Measuring Stands Black Granite Surf
- Page 23 and 24: Measuring Stands Black Granite Para
- Page 25: Measuring Stands Black Granite Mast
<strong>Measuring</strong> <strong>Stands</strong><br />
✓<br />
Heavy cast<br />
iron base with<br />
mounted steel column,<br />
ground (2" in.)<br />
<strong>Measuring</strong> arm with a<br />
.315" dia. clamping bore<br />
and 2 mounting bores<br />
for UPZ6<br />
Fine adjustment using<br />
the protected knob with<br />
.04" travel<br />
Base and<br />
measuring arm<br />
in cast iron. Dull-chrome<br />
plated steel column.<br />
Large <strong>Measuring</strong> Stand<br />
These two measuring stands provide different heights, as well as a wide range<br />
of accessories that serve for setting up a variety of measuring configurations.<br />
These high-precision components are remarkably stable and wear-resistant. They<br />
guarantee minimum measurement errors for state-of-the-art factory shop floors.<br />
Both stands enable electronic probes to be mounted, especially for direct,<br />
sum or comparative measurements.<br />
ø.25"<br />
ø2"<br />
sensor<br />
Supplied<br />
without<br />
15" / 30"<br />
Suited<br />
carrying case<br />
Declaration<br />
of conformity<br />
0 - 6.1" / 21"<br />
ø.315"<br />
2.75"<br />
7.5" x 6.7"<br />
INTERAPID Universal <strong>Stands</strong> UP (without measuring table)<br />
Heavy cast iron models. <strong>Measuring</strong> arm with locking feature<br />
and brake stop.<br />
in<br />
16.39041 28396 <strong>Measuring</strong> stand 6.25 30<br />
16.39042 28397 <strong>Measuring</strong> stand 21 42<br />
lbs<br />
G-17