Measuring Stands / TESA - Swiss Instruments Ltd
Measuring Stands / TESA - Swiss Instruments Ltd Measuring Stands / TESA - Swiss Instruments Ltd
Measuring Stands 60 INTERAPID ® Small Magnetic Supports BesTest Indicators Ideal for dial test indicators (lever-type). Model UJ 15 Model UJ 15G ✓ Rounded base with permanent magnet Holding force on a flat surface UJ 15: ≈ 220 N UJ 15G: ≥ 350 N Dovetail clamp with a .315" diameter fixing bore 110 UJ 15: 1 lbs UJ 15G: 2 lbs 152 sensor Supplied without 42 Suited carrying case Declaration of conformity ø35 Steel base plate 2" x 3" x .8" ø10 1.3 lbs 106 ø8 68 153 16.39007 88386 INTERAPID small magnetic support UJ 15 W/FA 16.39016 28398 INTERAPID small magnetic support UJ 15G W/FA 47 accessory 16.40501 40481 Steel base plate to use UJ 15 as mobile support Model with Articulated Arm ø50 ✓ Base has a vee recess and one magnetic flat face with disengageable magnet. Articulations made from duralumin. 16.39025 28639 INTERAPID small magnetic 8 (Full length) support with articulated arm consisting of: 16.69013 28640 1 Articulated arm 4.7 (Length) 16.69012 28641 1 Dovetail clamp with fine adjustment 16.69014 28642 1 Magnetic base 1.2 x 1.2 x 1.2 (L x B xH) in Holding force on a flat surface: ≈ 170 N Dovetail clamp with a .315" diameter fixing bore .9 lbs G-2 205 120 49 sensor Supplied without Suited carrying case M6 M6 ø8 Declaration of conformity
- Page 2 and 3: Measuring Stands ✓ Disengageable
- Page 4 and 5: Measuring Stands Heavy Duty Magneti
- Page 6 and 7: Measuring Stands 7764, 7765 Channel
- Page 8 and 9: Measuring Stands Base has three fla
- Page 10 and 11: Measuring Stands Uprights and Dial
- Page 12 and 13: Measuring Stands ✓ Basic stand Gr
- Page 14 and 15: Measuring Stands ✓ Meas. stand No
- Page 16 and 17: Measuring Stands ✓ Heavy cast iro
- Page 18 and 19: Measuring Stands Length stop For us
- Page 20 and 21: Measuring Stands Black Granite Surf
- Page 22 and 23: Measuring Stands Surface Plate Stan
- Page 24 and 25: Measuring Stands Black Granite Angl
<strong>Measuring</strong> <strong>Stands</strong><br />
60<br />
INTERAPID ® Small Magnetic Supports<br />
BesTest Indicators<br />
Ideal for dial test indicators (lever-type).<br />
Model UJ 15<br />
Model UJ 15G<br />
✓<br />
Rounded<br />
base with<br />
permanent magnet<br />
Holding force<br />
on a flat surface<br />
UJ 15: ≈ 220 N<br />
UJ 15G: ≥ 350 N<br />
Dovetail<br />
clamp with<br />
a .315" diameter<br />
fixing bore<br />
110<br />
UJ 15: 1 lbs<br />
UJ 15G: 2 lbs<br />
152<br />
sensor<br />
Supplied<br />
without<br />
42<br />
Suited<br />
carrying case<br />
Declaration<br />
of conformity<br />
ø35<br />
Steel base plate<br />
2" x 3" x .8"<br />
ø10<br />
1.3 lbs<br />
106<br />
ø8<br />
68<br />
153<br />
16.39007 88386 INTERAPID small magnetic support UJ 15 W/FA<br />
16.39016 28398 INTERAPID small magnetic support UJ 15G W/FA<br />
47<br />
accessory<br />
16.40501 40481 Steel base plate to use UJ 15 as mobile support<br />
Model with Articulated Arm<br />
ø50<br />
✓<br />
Base has<br />
a vee recess<br />
and one magnetic flat<br />
face with disengageable<br />
magnet. Articulations<br />
made from duralumin.<br />
16.39025 28639 INTERAPID small magnetic 8 (Full length)<br />
support with articulated arm<br />
consisting of:<br />
16.69013 28640 1 Articulated arm 4.7 (Length)<br />
16.69012 28641 1 Dovetail clamp with fine adjustment<br />
16.69014 28642 1 Magnetic base 1.2 x 1.2 x 1.2 (L x B xH)<br />
in<br />
Holding force<br />
on a flat surface:<br />
≈ 170 N<br />
Dovetail<br />
clamp with a<br />
.315" diameter<br />
fixing bore<br />
.9 lbs<br />
G-2<br />
205<br />
120<br />
49<br />
sensor<br />
Supplied<br />
without<br />
Suited<br />
carrying case<br />
M6<br />
M6<br />
ø8<br />
Declaration<br />
of conformity
<strong>Measuring</strong> <strong>Stands</strong><br />
✓<br />
Disengageable<br />
magnet<br />
Clamp with a .315" dia.<br />
fixing bore<br />
INTERAPID ® Magnetic Supports<br />
Standard Model and Models with Powerful<br />
Holding Force<br />
sensor<br />
Supplied<br />
without<br />
Suited<br />
carrying case<br />
Declaration<br />
of conformity<br />
16.39017<br />
16.39018<br />
16.39017 88418 Standard model ≈ 600 yes 70 - 220<br />
16.39018 28643 Powerful holding force ≈ 1000 no 70 - 220<br />
16.39019 28644 Powerful holding force ≈ 1000 yes 70 - 220<br />
N<br />
Fine<br />
Adjustment<br />
V-base<br />
for:<br />
G-3
<strong>Measuring</strong> <strong>Stands</strong><br />
INTERAPID ® Magnetic Bases<br />
Permanent magnet base holders have become the favorite holder for setup and checking<br />
work-in-process among ma chin ists, toolmakers and in spec tors.<br />
Featuring articulating arm and dovetail clamp with fine adjustment, these bases provide<br />
precise setting of gage, widely used for high accuracy mea sur ing with high res o lu tion<br />
in di ca tors and elec tron ic gages.<br />
✓<br />
M6<br />
01639022 01639023<br />
M8<br />
ø8<br />
49<br />
H<br />
L<br />
49<br />
ø8<br />
M6<br />
M6<br />
363<br />
280<br />
205<br />
120<br />
01639024<br />
01639025<br />
M8<br />
M6<br />
49<br />
ø8<br />
INTERAPID Magnetic Bases<br />
Base Assembly Articulating Arm <strong>Measuring</strong><br />
Part Number EDP Number Length Width Height Demensions (H & L) Force V Diameter<br />
01639022 20524 2.36” 1.97” 2.17” H = 12.2" (310mm) L = 4.7" (119.38mm) 400 1.18" to 5.9"<br />
01639023 28400 2.36” 1.97” 2.17” H = 15.36" (390mm) L = 11" (280mm) 400 1.18" to 5.9"<br />
01639024 20525 2.36” 1.97” 2.17” H = 14.3" (363mm) L = 11" (280mm) 400 1.18" to 5.9"<br />
01639025 28639 1.18” 1.18” 1.18” H = 8.07" (205mm) L = 7.9" (200.66mm) 400 1.18" to 5.9"<br />
G-4
<strong>Measuring</strong> <strong>Stands</strong><br />
Heavy Duty Magnetic Bases<br />
Heavy Duty Dog-House Permanet Magnetic Base Holder<br />
Sturdy dog-house style magnet base holds securely in<br />
upside down and other difficult positions on smooth iron<br />
or steel surfaces. Holding power is about 85 lbs. (400 N).<br />
Height of upright is 7-13/16".<br />
599-7742-7<br />
Upright<br />
.987" dia.-<br />
7-13/16" long<br />
Holding Rod<br />
.738" dia.-<br />
10-1/16" long<br />
Base Assembly<br />
Dial Indicator<br />
Length Width Height AGD Range Small Div.<br />
599-7742-7 44902 2-3/4” 2-7/16” 2-7/16” Without Indicator<br />
Permanent Magnet Base and Upright<br />
Upright Dia.<br />
599-7905 44964 .738”<br />
(For swivel clamps and<br />
dial holding rods, see<br />
pages G-10 and G-11.)<br />
Heavy Duty Magnetic Base with Adjustable<br />
Upright (Column)<br />
16.10101<br />
Upright-<br />
.700" dia.-<br />
8" long<br />
Holding Rod-<br />
.700" dia.-<br />
8" long<br />
Base size<br />
2-1/2"x2-1/4"<br />
This highly stable and versatile measuring support features<br />
a dis en gage able permanent magnet. Holding power<br />
is about 65 lbs. (300 N). The large base has four mag net ic<br />
faces and a vee recess for attaching to cy lin dri cal and<br />
cone-shaped sur faces with di am e ters from 3/4" - 6" (20-<br />
150 mm). The meas ur ing arms are made of thick-walled,<br />
ground, chromium-plated steel tube and have 3 rigid ar -<br />
ticu la tion points for inclining in any di rec tion.<br />
A thumb screw is provided for attachment of dial indicators<br />
by the lug back. A fine ad just ment device is also provided<br />
at the end of the arm. Ac ces so ries include a clamp with Ø<br />
8 mm for car tridge gage heads (16.40100). A dovetail<br />
adaptor (18.40105) is also included for BesTest In di ca tors.<br />
16.10101 00000<br />
(Furn. without Indicator)<br />
G-5
<strong>Measuring</strong> <strong>Stands</strong><br />
Medium Size Magnetic Bases<br />
Series 7746 MAGNICATOR ®<br />
Three flat<br />
energized faces<br />
(two sides and bottom).<br />
Simple push button turns<br />
magnetic holding power<br />
on and off.<br />
V-Surface holds<br />
to round surfaces.<br />
Small size and<br />
light weight<br />
Base dimensions<br />
1.875"L x 1.625"W x<br />
1.9375"H<br />
Tool Post<br />
.375" diameter<br />
7" long<br />
Offset Rod<br />
.250" diameter (.219" at<br />
end) with .25" diameter<br />
clamp screw.<br />
599-7746-1 599-7746<br />
599-7746 44908 Magnicator with fixed upright<br />
599-7747 44909 Magnicator with 7030 BesTest Indicator<br />
599-7748 44910 Magnicator with 7032 BesTest Indicator<br />
599-7746-1 45396 Magnicator with swivel upright<br />
Omnibase Permanent Magnetic Base<br />
Indicator Holder<br />
Magnetic base, multipurpose indicator holder. Attaches and adheres<br />
se cure ly to any shape or contour. May be used with cool ant sys tems,<br />
lamps and other suitable devices. 70 steel segments conform simply<br />
and precisely to any shape or contour. Cam-lock mechanism pro vides<br />
for easy and accurate fine adjustment of the steel seg ments.<br />
With a 599-7052 Dovetail At tach ment (included) the unit ac com mo dates<br />
AGD and BesTest Indicators for all your fixturing needs.<br />
70 steel segments<br />
conform<br />
to any shape or contour.<br />
Cam-lock provides easy,<br />
accurate fine adjustment<br />
of steel segments.<br />
Base dimensions<br />
3"L x 2.25"W x 1.75"H<br />
Tool Post<br />
.472" diameter<br />
9.25" long<br />
Offset Rod<br />
.393" diameter<br />
with fine adjust<br />
Includes<br />
599-7052<br />
Dovetail Attachment to<br />
accommodate AGD and<br />
BesTest Indicators<br />
599-7720 51945 Omnibase Permanent Base<br />
G-6
<strong>Measuring</strong> <strong>Stands</strong><br />
7764, 7765<br />
Channel in base<br />
for use on round or flat<br />
surfaces.<br />
Fingertip release for<br />
easy positioning and<br />
removal.<br />
7762, 7763, 7760, 7761<br />
Vee base for round or flat<br />
surfaces.<br />
Small Size Magnetic Bases<br />
MITI-MITE Series<br />
7764, 7765<br />
Base dimensions<br />
4"L x 1.25"W x .75"H<br />
Tool Post<br />
6.125" long<br />
Offset Rod<br />
6.125" long<br />
Offset Rod designed to<br />
connect to .25" lug back.<br />
Opposite end of offset<br />
rod has a .3125" step.<br />
Swivel clamp hole for<br />
rods is .25" diameter with<br />
.3125" diameter post<br />
hole.<br />
7762, 7763<br />
Base dimensions<br />
1.25"L x 1.25"W x 1.75"H<br />
Tool Post<br />
5.25" long<br />
Offset Rod<br />
4.5" long stepped widths<br />
of .21875", .25", and<br />
.3125"<br />
7760, 7761<br />
Base dimensions<br />
1.25"L x 1.25"W x 1.75"H<br />
Tool Post<br />
5" long<br />
Includes three posts:<br />
.219" dia. x 1.5" long<br />
.219" dia. x 4.375" long<br />
.312" dia. x 1.5" long<br />
599-7765<br />
599-7762<br />
599-7761<br />
Base<br />
L x W x H in<br />
Post Type<br />
599-7764 44918 Heavy Duty 4 x 1.25 x .75 Ball & Socket<br />
599-7765 44919 Heavy Duty with Fine Adjust 4 x 1.25 x .75 Ball & Socket<br />
599-7762 44916 Medium Duty 1.25 x 1.25 x 1.75 Fixed Upright<br />
599-7763 44917 Medium Duty with Fine Adjust 1.25 x 1.25 x 1.75 Fixed Upright<br />
599-7760 44914 Medium Duty 1.25 x 1.25 x 1.75 Ball & Socket<br />
599-7761 44915 Medium Duty with Fine Adjust 1.25 x 1.25 x 1.75 Ball & Socket<br />
G-7
<strong>Measuring</strong> <strong>Stands</strong><br />
MITI-MITE Magnetic Base with<br />
BesTest® Indicator Set<br />
MITI-MITE's permanent magnet “V” base is only 1.25" square x<br />
1.75" high and attaches solidly to rounded as well as flat sur fac es.<br />
Ball and socket action provides reach and orientation not pos si ble<br />
with fixed post holders. A fine ad just ment simplifies setup. Thread ed<br />
post segments are easily changed to suit the ap pli ca tion.<br />
in<br />
in<br />
Base<br />
L x W x H in<br />
599-849 51083 Base and Indicator Set<br />
consisting of:<br />
599-7761 44915 Magnetic Base with Fine Adjust 1.25 x 1.25 x 1.75<br />
599-7030-3 45978 BesTest Indicator .030 .0005<br />
Base has Ball<br />
and Socket to increase<br />
reach and orientation.<br />
Fine adjustment simplifies<br />
setup.<br />
Threaded post segments<br />
are easily interchanged<br />
to suit any application.<br />
Base includes<br />
three posts:<br />
.219" dia. x 1.5" long<br />
.219" dia. x 4.375" long<br />
.312" dia. x 1.5" long<br />
Indicator: 1" diameter dial<br />
and .5" long carbide tip<br />
with .080" dia. ball tip.<br />
Indicator<br />
includes automatic<br />
reversal and<br />
swivelling contact point.<br />
Monobloc (precision<br />
watch) body design.<br />
Universal dovetail mounting<br />
from top, bottom, and<br />
end.<br />
Plastic case.<br />
Universal Magnetic Indicator Holder with<br />
BesTest Indicator<br />
• Includes an easy-to-read, satin-black, “jet console” face BesTest<br />
indicator with high visibility orange hand.<br />
• BesTest Indicator comes with an .080" carbide contact point and a<br />
.250" extension with dovetail.<br />
• Complete with powerful permanent magnet.<br />
• Overall height: 3.75".<br />
• Features a universal swivel joint with friction movement.<br />
G-8<br />
599-7755 26990 Universal Magnetic Indicator Holder<br />
599-7755-1 27071 Universal Magnetic Indicator Holder with Indicator & Case<br />
Powerful<br />
magnetic base<br />
with universal joint.<br />
3.75"<br />
Overall height of<br />
base and arm<br />
Indicator includes .080"<br />
carbide contact point and<br />
a .250" extension with<br />
dovetail.<br />
BesTest indicator<br />
includes<br />
easy-to-read, satin-black,<br />
“jet console” face with<br />
high-visibility orange<br />
hand.<br />
Suited<br />
carrying case.
<strong>Measuring</strong> <strong>Stands</strong><br />
Base has three<br />
flat energized<br />
faces (two sides and bottom),<br />
Vee bottom for flat<br />
or round surfaces.<br />
Flexbar has 13 ball and<br />
socket flexing units.<br />
Variable range tool clamp<br />
holds indicators, gage<br />
heads, scribers, mounting<br />
studs, etc. up to .5" in<br />
diameter.<br />
Heavy Duty Flexbar Holder<br />
with MAGNICATOR ® Base<br />
Sets and locks with a twist of the knob.<br />
Flexbar<br />
9" long<br />
Fits .25" diameter posts<br />
No. 7770<br />
has Micro-Screw<br />
Fine Adjustment with<br />
.625" range to simplify<br />
setup.<br />
599-7770 44925 MAGNICATOR Base, Flexbar & Fine Adjustment<br />
599-7770-1 44926 Heavy Duty Flexbar Arm Only<br />
Flexbar Holder and MITI-MITE<br />
Magnetic Base<br />
Base has Vee<br />
bottom for flat<br />
or round surfaces.<br />
Flexbar has tool clamp<br />
with a range of 0 - .25"<br />
for holding indicators,<br />
gage heads, scribers,<br />
mounting studs, etc.<br />
Flexbar<br />
5.5" long<br />
Fits .312" diameter posts<br />
Base<br />
1.25" x 1.25" x 1.75"<br />
Fine Adjustment<br />
Control on upright<br />
post makes zeroing a<br />
BesTest Indicator a snap.<br />
599-7769 44923 MITI-MITE Base, Flexbar & Fine Adjustment<br />
599-7769-1 44924 Small Flexbar Arm Only<br />
G-9
<strong>Measuring</strong> <strong>Stands</strong><br />
Indicator Holder - Parts and<br />
Attachments<br />
Holes<br />
599-7906-1 51892 Sliding Swivel .375" (2) Used w/Rod No. 7807, 7900<br />
Used w/Upright No. 7902<br />
Holes<br />
599-7907-1 51893 Sliding Swivel .375" (1) Used w/Rod No. 7807, 7900<br />
.738" (1) Used w/Upright No. 7903<br />
Used w/Base No. 7905<br />
Holes<br />
599-7908 44967 Sliding Swivel .738" (1) Used w/Rod No. 7808, 7901<br />
.987" (1) Used w/Upright No. 7904<br />
Used w/Base No. 7905-1<br />
Holes<br />
599-7739-1 44893 Sliding Swivel .312" (1) Used w/Test Indicator Sets<br />
.220" - .250" with No. 7739 and 7740<br />
spring-loaded clamp<br />
Holes<br />
599-7909 44698 Adapter Bushing .375" I.D. Used w/Upright and Rods<br />
.738" O.D.<br />
G-10<br />
Rod<br />
599-7753-120 44912 Offset Rod .250" 6" long with For use w/Magnicator Indicator<br />
.25" clamp screw Holders and all MITI-MITE Holders<br />
.220" step on other end Used w/Base No. 7905
<strong>Measuring</strong> <strong>Stands</strong><br />
Uprights and Dial Holding Rods<br />
For holding AGD lug backs.<br />
A<br />
B C D E F G<br />
599-7807 44935 Fine Adjust (F) .375" 9.25" 1/4" clamp screw for 7733<br />
599-7808 44936 Fine Adjust (G) .738" 10" 1/4" clamp screw for 7742<br />
599-7900 44959 No Fine Adj. (D) .375" 9.25" 1/4" clamp screw for 7730, 7744<br />
599-7901 44960 No Fine Adj. (E) .738" 9.625" 1/4" clamp screw for 7731, 7732<br />
599-7902 44961 Upright (A) .375" 8" For old style No. 730<br />
.738" 8.75" For 7730<br />
599-7903 44962 Upright (B) – – Also for old style No. 730 bases<br />
599-7904 44963 Upright (C) .987" 10" For 7731 and 7732<br />
INTERAPID ® <strong>Measuring</strong> Supports<br />
ø8<br />
L<br />
177<br />
ø8<br />
119<br />
✓<br />
Base with resting<br />
front face.<br />
Clamp for a .315" dia.<br />
measuring stem or dial<br />
gages with lugs.<br />
Stand<br />
No. 16.39003<br />
with additional dovetail<br />
clamp.<br />
Cast iron<br />
base<br />
314<br />
98 x 70<br />
ø17.8<br />
ø17.8<br />
253<br />
2.9 lbs or<br />
9.6 lbs<br />
sensor<br />
Supplied<br />
without<br />
Suited<br />
carrying case<br />
Declaration<br />
of conformity<br />
150 x 120<br />
Used in<br />
conjunction with<br />
16.39003 28645 INTERAPID small meas. support Dial test indicators, small dial gages<br />
16.39004 27527 INTERAPID measuring support Dial test indicators, dial gages, precision<br />
indicators, electronic probes etc.<br />
G-11
<strong>Measuring</strong> <strong>Stands</strong><br />
Universal <strong>Measuring</strong> Support<br />
Medium-sized sliding support for dial test indicators (lever-type),<br />
electronic probes, etc. – with fine adjustment.<br />
6.7"<br />
ø.70"<br />
✓<br />
Stand with<br />
guiding faces<br />
sideways.<br />
Vertical column movable<br />
along the T-slot.<br />
2 rigid articulation<br />
points.<br />
9.6"<br />
ø.70"<br />
6.9"<br />
Cast iron<br />
base<br />
7.3 lbs<br />
7.9" x 2.2"<br />
1.4"<br />
sensor<br />
Supplied<br />
without<br />
Suited<br />
carrying case<br />
.315"<br />
.47"<br />
Declaration<br />
of conformity<br />
.35"<br />
.83"<br />
16.39000 28373 Universal <strong>Measuring</strong> Support<br />
furnished with :<br />
16.40100 40458 Clamp with a .315" dia. fixing bore<br />
18.40105 40523 Fixing shank with a .315" dia. and dovetail recess<br />
COMPARATOR <strong>Measuring</strong> Stand<br />
Model without fine adjustment. Suitable as basic component for<br />
mounting specific workpiece attachments for series inspection.<br />
✓<br />
0 - 5.5"<br />
ø.315"<br />
2.25"<br />
ø1.0"<br />
7.0"<br />
9.3"<br />
<strong>Measuring</strong><br />
table with<br />
ground measuring face.<br />
Dismountable column.<br />
<strong>Measuring</strong> arm with a<br />
.315" dia. clamping bore.<br />
Cast iron table.<br />
Chrome-plated<br />
steel column. Spherical<br />
graphite cast iron arm.<br />
1.4"<br />
6.6 lbs<br />
6" x 4.3"<br />
sensor<br />
Supplied<br />
without<br />
G-12<br />
16.39008 88401 Comparator <strong>Measuring</strong> Stand 0 - 5.5 4 x 4<br />
in<br />
in<br />
Suited<br />
carrying case<br />
Declaration<br />
of conformity
<strong>Measuring</strong> <strong>Stands</strong><br />
✓<br />
Basic stand<br />
Ground<br />
measuring face.<br />
2 T-slots. Dismountable<br />
column.<br />
COMPARATOR <strong>Measuring</strong> <strong>Stands</strong><br />
Basic component for mounting specific workpiece<br />
attachments for series inspection.<br />
Cast iron table.<br />
Chrome-plated<br />
steel column.<br />
<strong>Measuring</strong> arm<br />
Fine<br />
adjustment<br />
within a range of .04" dia.<br />
clamping bore<br />
Sliding arm<br />
Floating holder<br />
for <strong>TESA</strong> YA.<br />
Adjustable swivelling<br />
movement. .512" dia.<br />
clamping bore. 1.38",<br />
2.24" or 3.15"<br />
vertical travel ranges.<br />
Overall span: 2.36".<br />
Stop plate<br />
0 - 6.9"<br />
ø.315"<br />
2.56"<br />
ø1.2"<br />
7.3" x 5.12"<br />
9.5"<br />
12"<br />
Dimensions:<br />
4.53" x 1.38" x .138"<br />
120° vee recess for<br />
diameters ≤ 4.72".<br />
Two fixing screws.<br />
Additional data<br />
10.7 lbs<br />
(basic stand).<br />
1.9 lbs (measuring arm).<br />
3.9 lbs (sliding arm).<br />
Suited<br />
carrying case<br />
Declaration<br />
of conformity<br />
16.39009 88412 Basic measuring stand 6.75 5 x 4.5<br />
(without measuring arm)<br />
accessories<br />
16.10200 40448 <strong>Measuring</strong> arm with fine adjustment<br />
16.10201 40449 Sliding arm used in conjunction with <strong>TESA</strong> YA internal measuring<br />
instruments for stationary bore measurement.<br />
16.40000 40457 Depth stop plate<br />
in<br />
in<br />
G-13
<strong>Measuring</strong> <strong>Stands</strong><br />
Comparator <strong>Stands</strong> with<br />
Cast Iron Bases<br />
Three models are available. Each Com para tor Stand<br />
in cludes one 14.81018 Dial Indicator (AGD Group 2,<br />
2-1/4" dia., grad uated 0-.050-0 by .001”, range .500")<br />
and Lift Lever. The indicator is mounted by the<br />
standard lug back.<br />
599-7710-1<br />
Base Column Adj. Arm<br />
Size Size Length<br />
599-7710-1 51719 7” x 9” 12-3/8” 5”<br />
599-7711-1 51720 5” x 8” 12-3/8” 5”<br />
599-7712-1 51721 3” x 7” 7-3/8” 2-1/2”<br />
599-7703<br />
Comparator Components<br />
Adjusting Arms<br />
Full, 360° swing of arm permits measure ment from<br />
either the com par a tor stand base or a surface<br />
plate. Furnished with a mounting screw for AGD<br />
Lug-back mounting of Dial Indicator.<br />
Throat Depth<br />
599-7703 44878 2-1/2”<br />
599-7704 44879 5”<br />
599-7700<br />
Cast Iron Comparator Bases<br />
Ground bases available in three sizes accommodate<br />
both sizes of Adjusting Arms and Support<br />
Columns listed on this page.<br />
Base Size<br />
599-7700 44875 3” x 7”<br />
599-7701 44876 5” x 8”<br />
599-7702 44877 7” x 9”<br />
599-7705<br />
Support Columns (Uprights)<br />
Ground Support Columns pro vide a rig id and<br />
smooth op er at ing col umn for ad just ing arms.<br />
Threaded and fur nished with screw for mount ing to<br />
com par a tor base.<br />
Length Diameter<br />
599-7705 44880 7-3/8” 1-1/8”<br />
599-7706 44881 12-3/8” 1-1/8”<br />
G-14
<strong>Measuring</strong> <strong>Stands</strong><br />
✓<br />
Meas. stand<br />
No. 16.39030 :<br />
Chrome-plated steel column.<br />
Tilting measuring<br />
arm with articulation.<br />
.04" or .315" dia. bore for<br />
dovetail clamp or lugs.<br />
No. 16.39033 :<br />
Chrome-plated steel<br />
column. Sliding measuring<br />
arm, horizontally.<br />
.04" or .315" dia. bore for<br />
dovetail clamp or lugs.<br />
3 μm<br />
DIN 876 T1,<br />
grade 00:<br />
Bench Comparator with<br />
Black Granite Base<br />
ø.965"<br />
sensor<br />
Supplied<br />
without<br />
13.7"<br />
10.8"<br />
ø1.38"<br />
Suited<br />
carrying case<br />
16.39033<br />
2"<br />
Declaration<br />
of conformity<br />
7" x 9.8"<br />
13.7"<br />
2"<br />
ø.55"<br />
ø.79"<br />
16.39030<br />
7" x 9.8"<br />
<strong>Measuring</strong> <strong>Measuring</strong><br />
Fine<br />
Overall Span<br />
Face<br />
Face in<br />
in<br />
Adjustment in<br />
16.39030 28646 Granite 7 x 8 0 - 9.4 yes adjustable<br />
16.39033 28647 Granite 7 x 7.8 0 - 10.2 yes adjustable<br />
<strong>Measuring</strong> <strong>Measuring</strong> Column Column<br />
Table<br />
Table in<br />
in<br />
in<br />
16.39030 28646 Granite 7 x 9.84 x 1.96 .787 11.8 18.5<br />
16.39033 28647 Granite 7 x 9.84 x 1.96 1.38 11.8 23<br />
lbs.<br />
G-15
<strong>Measuring</strong> <strong>Stands</strong><br />
Small <strong>Measuring</strong> Stand<br />
Stable measuring stand for precision measuring of small parts.<br />
✓<br />
7.8"<br />
0 - 1.575"<br />
ø.25"<br />
ø.315"<br />
1.38"<br />
<strong>Measuring</strong> stand (without measuring table)<br />
Height adjustable table mount with thread and fine adjustment.<br />
Clamping groove for UMZ 12 depth stop (No. 16.40300).<br />
Stand has a<br />
.315" dia. bore.<br />
Also with two clamping<br />
bores with a .236" dia. for<br />
UPZ6.Usable overall<br />
span: 1.38"<br />
in<br />
Fine adjustment<br />
in<br />
<strong>Measuring</strong><br />
stand (without<br />
measuring table): 6.6 lbs.<br />
5.7" x 4.9"<br />
16.39002 28311 1.6 .6<br />
sensor<br />
Supplied<br />
without<br />
<strong>Measuring</strong> table with dust grooves<br />
Hardened steel, lapped measuring face.<br />
in<br />
16.40302 40461 2.6 x .47<br />
Suited<br />
carrying case<br />
Declaration<br />
of conformity<br />
<strong>Measuring</strong> table without dust grooves<br />
Hardened steel, finish ground measuring<br />
face.<br />
in<br />
16.40303 40462 2.6 x .47<br />
Double probe-holder<br />
8 mm dia. mounting bore for 2 probes.<br />
Clamped on the measuring stand with<br />
2 shafts having a 6 mm dia.<br />
Laterally<br />
in<br />
16.40401 40463 .5 x 3<br />
Depth stop<br />
Clamp for mounting purpose in the stand<br />
groove. Hardened and ground stop base.<br />
Stop Face<br />
in<br />
16.40300 40459 2.2 x 4<br />
Side stop<br />
Hardened and ground.<br />
For use with UMZ 12 depth stop.<br />
Side Stop<br />
in<br />
G-16<br />
16.40301 40460 1.24 x .4 x .12
<strong>Measuring</strong> <strong>Stands</strong><br />
✓<br />
Heavy cast<br />
iron base with<br />
mounted steel column,<br />
ground (2" in.)<br />
<strong>Measuring</strong> arm with a<br />
.315" dia. clamping bore<br />
and 2 mounting bores<br />
for UPZ6<br />
Fine adjustment using<br />
the protected knob with<br />
.04" travel<br />
Base and<br />
measuring arm<br />
in cast iron. Dull-chrome<br />
plated steel column.<br />
Large <strong>Measuring</strong> Stand<br />
These two measuring stands provide different heights, as well as a wide range<br />
of accessories that serve for setting up a variety of measuring configurations.<br />
These high-precision components are remarkably stable and wear-resistant. They<br />
guarantee minimum measurement errors for state-of-the-art factory shop floors.<br />
Both stands enable electronic probes to be mounted, especially for direct,<br />
sum or comparative measurements.<br />
ø.25"<br />
ø2"<br />
sensor<br />
Supplied<br />
without<br />
15" / 30"<br />
Suited<br />
carrying case<br />
Declaration<br />
of conformity<br />
0 - 6.1" / 21"<br />
ø.315"<br />
2.75"<br />
7.5" x 6.7"<br />
INTERAPID Universal <strong>Stands</strong> UP (without measuring table)<br />
Heavy cast iron models. <strong>Measuring</strong> arm with locking feature<br />
and brake stop.<br />
in<br />
16.39041 28396 <strong>Measuring</strong> stand 6.25 30<br />
16.39042 28397 <strong>Measuring</strong> stand 21 42<br />
lbs<br />
G-17
<strong>Measuring</strong> <strong>Stands</strong><br />
Standard measuring table<br />
Hardened steel. Two measuring faces<br />
with dust grooves, lapped. One face has<br />
a .5" wide strip along the center.<br />
✓<br />
in<br />
16.40405 40467 1.75 x 3.75 1<br />
μm<br />
<strong>Measuring</strong> table with probe holder<br />
Features a .315" dia. mounting bore for<br />
axial probe. Hardened and lapped measuring<br />
face with dust grooves as well<br />
as a .51" wide strip along the center.<br />
in<br />
16.40410 40471 1.75 x 3.75 1<br />
μm<br />
Side table<br />
To be mounted sideways on both<br />
measuring tables. Made of black plastic,<br />
supplied in pairs.<br />
Resting Face<br />
in<br />
16.40404 40466 2.125 x 3.75<br />
Large measuring table with probe holder<br />
Features a .315" dia. mounting bore for<br />
axial probe. Hardened and lapped measuring<br />
face with dust grooves as well<br />
as a .63" wide strip along the center.<br />
in<br />
16.40411 40472 4.75 x 4.75 1.5<br />
μm<br />
Cross beam<br />
For center and vee supports.<br />
Made from cast iron and ground.<br />
16.40416 40476 12<br />
Length<br />
in<br />
G-18<br />
Resting stand<br />
For cylindrical or conical part elements.<br />
Resting plates with tungsten carbide<br />
pins for adaptation to the part diameter.<br />
Distance between plates: ≤ 12".<br />
For use with cross beam 16.40416.<br />
Supplied in pairs.<br />
16.40415 40475 ≤ 1.2<br />
in<br />
Vee blocks<br />
Support parts on tungsten carbide pins.<br />
Distance between blocks: ≤ 11.25". With<br />
length stop. For use with cross beam<br />
16.40416. Supplied in pairs.<br />
in<br />
16.40418 40478 ≤ 1.6 108°
<strong>Measuring</strong> <strong>Stands</strong><br />
Length stop<br />
For use with cross beam 16.40416 associated with center<br />
or vee supports. A probe can be mounted instead of the stop pin.<br />
16.40417 40477<br />
Center supports<br />
For axial and radial run-out inspection. Max. width of points:<br />
6.1". Feature solid and hollow points movable longitudinally.<br />
Fitted with spring but lockable. For use with cross beam 16.40416<br />
Supplied in pairs.<br />
16.40414 40474 2<br />
Height of points<br />
in<br />
✓<br />
Double probe holder<br />
.315" dia. clamping bore for 2 electronic<br />
probes. Mounted on the measuring<br />
stand with 2 shafts having a .24" dia.<br />
Laterally<br />
in<br />
16.40401 40463 .5 x 3.25<br />
Limit stop<br />
Mounted with clamp on the column.<br />
Hardened, dull-chrome plated.<br />
16.40403 40465 2.7 x .8<br />
Resting Face<br />
in<br />
Stop plate<br />
For use with the limit stop 16.40403.<br />
Hardened, dull-chrome plated.<br />
16.40402 40464 120°<br />
Vee<br />
Recess<br />
Rack and pinion slide<br />
For vertical adjustment of the measuring arm.<br />
Travel<br />
in<br />
16.40419 40479 7.625<br />
G-19
<strong>Measuring</strong> <strong>Stands</strong><br />
Black Granite Plates And Tools<br />
The Base for Accuracy<br />
What a difference Black Granite makes! More than simple appearance<br />
makes Brown & Sharpe Black Granite surface plates the preferred base<br />
for accuracy.<br />
• Grain Structure<br />
Black Granite has the finest grain struc ture. A fine, uni form<br />
struc ture means a smooth er, less abrasive surface.<br />
• Easy Maintenance<br />
Black Granite won’t rust. Washing with soap and water,<br />
Brown & Sharpe Clean er, or other readily available cleaners is<br />
all that’s needed to keep it “like new”.<br />
• Reflectivity<br />
Black Granite has the lowest reflectivity. Verniers, dials and<br />
meters are easier to read against its non-glare surface.<br />
• Stability<br />
Black Granite is more stable. Its uniform density of struc ture is<br />
less sus cep ti ble to change due to temperature and hu mid i ty.<br />
• Federal Specifications<br />
Black Granite meets or exceeds Federal Specifications.<br />
Overall flatness shown guar an tees that, “All points of the work<br />
surface shall be con tained between two parallel planes, the base<br />
plane and the roof plane, separated a dis tance no greater than that<br />
specified for the respective grades.” (Reference: Federal<br />
Spec i fi ca tion GGG-P-463c)<br />
• Center-Point Load Ratings<br />
Per Federal Specification, surface plates may be spec i fied as<br />
rated for normal loading conditions (50-pounds-per-square-foot<br />
center-point load) or for abnormal loading conditions (100-<br />
pounds-per-square-foot center-point load). This means that the<br />
designated load may be placed in the center of the plate without<br />
deflecting the overall ac cu ra cy more than 50%. Unless otherwise<br />
specified by the customer, all Brown & Sharpe surface<br />
plates are manufactured to meet the more-difficult-to-achieve<br />
100-pounds-per-square-foot requirement - your assurance of<br />
the highest-quality plate.<br />
• All granite products are manufactured in an ISO 9002<br />
certified facility.<br />
Note: Sierra Grey and High Quartz Pink Granite Plates available as specials.<br />
G-20
<strong>Measuring</strong> <strong>Stands</strong><br />
Black Granite Surface Plates 0-Ledge<br />
Surface plate covers are<br />
available for all plates on request.<br />
Surface plates 48 in x 72 in and<br />
larger are made from Sierra Grey Granite.<br />
Size<br />
in<br />
“Tool Room” Surface Plate - Grade (B)<br />
701-107 45236 12 x 18 x 3 300 x 450 x 75 .0002 in / 5.0 μm 60<br />
701-113 45241 18 x 24 x 3 450 x 600 x 75 .0002 in / 5.0 μm 145<br />
701-125 45246 24 x 36 x 4 600 x 900 x 100 .0002 in / 5.0 μm 375<br />
701-149 45251 36 x 48 x 6 900 x 1200 x 150 .0006 in / 15.0 μm 1125<br />
701-152 45254 36 x 60 x 6 900 x 1500 x 150 .0008 in / 20.0 μm 1848<br />
701-155 45257 36 x 72 x 8 900 x 1800 x 200 .0012 in / 30.0 μm 2465<br />
701-173 45260 48 x 60 x 8 1200 x 1500 x 200 .0010 in / 25.0 μm 2875<br />
701-176 45262 48 x 72 x 8 1200 x 1800 x 200 .0012 in / 30.0 μm 3600<br />
701-183 45263 48 x 96 x 10 1200 x 2400 x 250 .0016 in / 40.0 μm 5050<br />
“Inspection”Surface Plates - Grade (A)<br />
701-110 45239 12 x 18 x 4 300 x 450 x 100 .0001 in / 2.0 μm 80<br />
701-116 45244 18 x 24 x 4 450 x 600 x 100 .0001 in / 2.0 μm 165<br />
701-128 45249 24 x 36 x 5 600 x 900 x 125 .0001 in / 2.0 μm 470<br />
“Laboratory” Surface Plate - Grade (AA)<br />
701-111 45240 12 x 18 x 4 300 x 450 x 100 .00005 in / 1.0 μm 80<br />
701-117 45245 18 x 24 x 4 450 x 600 x 100 .00005 in/1.0 μm 165<br />
701-129 45250 24 x 36 x 6 600 x 900 x 150 .00005 in / 1.0 μm 550<br />
Size<br />
mm<br />
Overall<br />
Flatness<br />
Tolerance<br />
lbs.<br />
Toolmaker’s Flat<br />
Made of the same high quality black granite as surface<br />
plates. A valuable addition to the equip ment of toolmakers<br />
and others engaged in pre ci sion bench checking, layout<br />
work, and other op er a tions requiring a flat ref er ence surface.<br />
Flatness is within 400 micro inches (0.01 mm).<br />
Size<br />
in<br />
701-4 45235 8 x 12 x 2 5 lbs.<br />
(Approx)<br />
G-21
<strong>Measuring</strong> <strong>Stands</strong><br />
Black Granite Surface Plates<br />
2 and 4-Ledge<br />
Overall<br />
Size<br />
in<br />
Size<br />
mm<br />
Flatness<br />
Tolerance<br />
2-Ledge Plates - “Inspection” Grade (A)<br />
701-108 45237 12 x 18 x 4 300 x 450 x 100 .0001 in / 2.0 μm 60<br />
701-114 45242 18 x 24 x 4 450 x 600 x 100 .0001 in / 2.0 μm 145<br />
701-126 45247 24 x 36 x 6 600 x 900 x 150 .0001 in / 2.0 μm 375<br />
701-150 45252 36 x 48 x 6 900 x 1200 x 150 .0003 in / 7.5 μm 1125<br />
701-153 45255 36 x 60 x 8 900 x 1500 x 200 .0004 in / 10.0 μm 1840<br />
701-156 26125 36 x 72 x 10 900 x 1800 x 250 .0006 in / 15.0 μm 2465<br />
701-174 26126 48 x 60 x 8 1200 x 1500 x 200 .0005 in / 12.5 μm 2875<br />
701-177 26127 48 x 72 x 8 1200 x 1800 x 250 .0006 in / 15.0 μm 3600<br />
701-184 45264 48 x 96 x 12 1200 x 2400 x 300 .0008 in / 20.0 μm 5050<br />
4-Ledge Plates - “Laboratory” Grade (AA)<br />
701-109 45238 12 x 18 x 4 300 x 450 x 100 .00005 in / 1.0 μm 60<br />
701-115 45243 18 x 24 x 4 450 x 600 x 100 .00005 in / 1.0 μm 145<br />
701-127 45248 24 x 36 x 6 600 x 900 x 150 .00005 in / 1.0 μm 375<br />
701-151 45253 36 x 48 x 8 900 x 1200 x 200 .00015 in / 3.0 μm 1125<br />
701-154 45256 36 x 60 x 10 900 x 1500 x 250 .0002 in / 5.0 μm 1840<br />
701-157 45259 36 x 72 x 12 900 x 1800 x 300 .0003 in / 7.5 μm 2465<br />
701-175 45261 48 x 60 x 10 1200 x 1500 x 250 .00025 in / 6.3 μm 2875<br />
701-178 26128 48 x 72 x 12 1200 x 1800 x 300 .0003 in / 7.5 μm 3600<br />
701-185 45265 48 x 96 x 14 1200 x 2400 x 350 .0004 in / 10.0 μm 5050<br />
Special sizes for 0, 2 and 4 ledge plates available on request.<br />
lbs.<br />
Surface Plate Cleaner<br />
Cleans and main tains surface plates and all<br />
granite products. Spe cial ly for mu lat ed to<br />
remove oil, grease, dirt and metal par ti cles<br />
without water and to act as a rust inhibitor.<br />
Case of 12 701-901 45481<br />
one-quart bottles<br />
G-22
<strong>Measuring</strong> <strong>Stands</strong><br />
Surface Plate <strong>Stands</strong><br />
Cabinet support stands with a working<br />
height of 36 inches are available on request.<br />
Casters and wheel locks are available on request.<br />
0-LEDGE<br />
2-LEDGE<br />
4-LEDGE<br />
For Plate<br />
Size<br />
701-307 45273 701-302 45269 701-303 45270 12 in x 18 in 77 lbs.<br />
300 x 450 mm 35 kg<br />
701-313 45276 701-304 45271 701-305 45272 18 in x 24 in 93 lbs.<br />
450 x 600 mm 42 kg<br />
701-325 45280 701-308† 45274 701-316 45277 24 in x 36 in 115 lbs.<br />
600 x 900 mm 52 kg<br />
701-349 45286 701-320†† 45278 701-328 45281 36 in x 48 in 166 lbs.<br />
900 x 1200 mm 75 kg<br />
701-353 45288 701-332 45282 701-336 45283 36 in x 60 in 225 lbs.<br />
900 x 1500 mm 101 kg<br />
701-355 45289 701-340 45284 701-344 45285 36 in x 72 in 245 lbs.<br />
900 x 1800 mm 110 kg<br />
701-373 45295 701-348 26129 701-352 45287 48 in x 60 in 255 lbs.<br />
1200 x 1500 mm 115 kg<br />
701-375 45296 701-356 45290 701-360 45291 48 in x 72 in 400 lbs.<br />
1200 x 1800 mm 180 kg<br />
701-383 45298 701-364 45292 701-368 45293 48 in x 96 in 550 lbs.<br />
1200 x 2400 mm 248 kg<br />
† Stand for 2-Ledge with Casters. Tool No. 701-312; EDP No. 45275<br />
†† Stand for 2-Ledge with Casters. Tool No. 701-324; EDP No. 45279<br />
G-23
<strong>Measuring</strong> <strong>Stands</strong><br />
Black Granite Parallels<br />
Parallelism<br />
• Laboratory Grade AA:<br />
.000025 in (0.6 µm) per 12 in<br />
• Inspection Grade A:<br />
.000050 in (1.2 µm) per 12 in<br />
Size<br />
in<br />
Size<br />
mm<br />
Accuracy<br />
701-906 45326 .75 x 1 x 6 19 x 25 x 150 AA 2<br />
701-908 45328 .75 x 1 x 6 19 x 25 x 150 AA 4<br />
701-956 45335 .75 x 1 x 6 19 x 25 x 150 A 2<br />
701-958 45336 .75 x 1 x 6 19 x 25 x 150 A 4<br />
701-910 45329 1 x 2 x 12 25 x 50 x 300 AA 2<br />
701-911 45331 1 x 2 x 12 25 x 50 x 300 AA 4<br />
701-960 45337 1 x 2 x 12 25 x 50 x 300 A 2<br />
701-961 45338 1 x 2 x 12 25 x 50 x 300 A 4<br />
701-912 45332 1.5 x 3 x 18 38 x 75 x 450 AA 2<br />
701-914 45334 1.5 x 3 x 18 38 x 75 x 450 AA 4<br />
701-962 45339 1.5 x 3 x 18 38 x 75 x 450 A 2<br />
701-964 45340 1.5 x 3 x 18 38 x 75 x 450 A 4<br />
Linear dimensions are nominal.<br />
Parallels are sold in matched pairs only.<br />
Special sizes and cases are available on request.<br />
No.<br />
Faces<br />
Black Granite Straight Edges<br />
Size<br />
Size<br />
Approx.<br />
in<br />
mm<br />
lbs. (kg)<br />
No.<br />
Faces<br />
Inspection Grade (.00005 in / 1.2 μm Accuracy)†<br />
701-704 45315 24 x 2 x 4 600 x 50 x 100 15 (6.8 kg) 2<br />
701-706 45316 36 x 2 x 6 900 x 50 x 150 30 (13.5 kg) 4<br />
701-708 45317 48 x 2 x 8 1200 x 50 x 150 60 (27 kg) 2<br />
Laboratory Grade (.000025 in / 0.6 μm Accuracy)†<br />
701-754 45320 24 x 2 x 4 600 x 50 x 100 15 (6.8 kg) 4<br />
701-756 45321 36 x 2 x 6 900 x 50 x 150 30 (13.5 kg) 2<br />
701-758 45322 48 x 2 x 8 1200 x 50 x 150 60 (27 kg) 4<br />
† Straightness per foot, per auto-collimator inspection.<br />
G-24
<strong>Measuring</strong> <strong>Stands</strong><br />
Black Granite Angle Plates<br />
Designed for fast, easy clamp ing of a variety of tools<br />
and fixtures. Black Granite provides stability, long-life,<br />
fine-grain smooth ness and easy main te nance.<br />
Size<br />
in<br />
Inspection Grade (A) Accuracy: .000025 in<br />
(1.2 μm) per 6 in flatness and squareness<br />
701-556 45309 4 x 4 x 4 100 x 100 x 100 15 lbs. 2<br />
701-558 45310 4 x 4 x 4 100 x 100 x 100 15 lbs. 4<br />
701-560 54311 6 x 6 x 6 150 x 150 x 150 20 lbs. 2<br />
701-562 54312 6 x 6 x 6 150 x 150 x 150 20 lbs. 4<br />
701-564 54313 6 x 9 x 12 150 x 225 x 300 45 lbs. 2<br />
701-566 54314 6 x 9 x 12 150 x 225 x 300 45 lbs. 4<br />
Laboratory Grade (AA) Accuracy: .000025 in<br />
(0.6 μm) per 6 in flatness and squareness<br />
701-506 45300 4 x 4 x 4 100 x 100 x 100 15 lbs. 2<br />
701-508 45302 4 x 4 x 4 100 x 100 x 100 15 lbs. 4<br />
701-510 45303 6 x 6 x 6 150 x 150 x 150 20 lbs. 2<br />
701-512 45305 6 x 6 x 6 150 x 150 x 150 20 lbs. 4<br />
701-514 45306 6 x 9 x 12 150 x 225 x 300 45 lbs. 2<br />
701-516 45308 6 x 9 x 12 150 x 225 x 300 45 lbs. 4<br />
Cases Only For:<br />
701-506-9999 45301<br />
701-510-9999 45304<br />
701-514-9999 45307<br />
Other sizes are available on request.<br />
Size<br />
mm<br />
Black Granite Master Angle Square<br />
Made of fine grain Black Granite finished to<br />
Lab Grade (square within .000025 in over 6 in).<br />
Used for calibrating and es tab lish ing squareness<br />
of high accuracy measuring and ref er enc ing tools.<br />
Also used for direct check ing of squareness,<br />
straightness and parallelism in the same manner<br />
as steel squares.<br />
Approx.<br />
No.<br />
Faces<br />
Size<br />
Size<br />
Approx.<br />
in<br />
mm<br />
lbs. (kg)<br />
701-818 45325 9 x 18 x 3 225 x 450 x 75 38 (17.3 kg)<br />
701-812 26688 12 x 18 x 3 300 x 450 x 75 67 (30.5 kg)<br />
701-824 26689 18 x 24 x 3 450 x 600 x 75 88 (40 kg)<br />
G-25
<strong>Measuring</strong> <strong>Stands</strong><br />
Black Granite Master Square<br />
Master Square<br />
Made of fine grain Black Granite finished to Lab<br />
Grade (square within .000025 in over 6 in). Four<br />
narrow faces and one large face finished.<br />
Used for calibrating and es tab lish ing<br />
squareness of high accuracy mea sur ing and<br />
ref er enc ing tools. Also used for direct<br />
checking of squareness, straightness and<br />
parallelism in the same manner as steel squares.<br />
Size<br />
Size<br />
Approx.<br />
in<br />
mm<br />
lbs. (kg)<br />
701-830 26690 12 x 12 x 3 300 x 300 x 75 45 (20.5 kg)<br />
701-832 26691 14 x 14 x 3 350 x 350 x 75 61 (27.7 kg)<br />
701-838 26692 18 x 18 x 3 450 x 450 x 75 102 (46.4 kg)<br />
Inspection Grade .00005 in and larger sizes available on request.<br />
Black Granite Vee Blocks<br />
Vee Blocks<br />
H<br />
Made of fine grain Black Granite<br />
finished to Lab Grade (square, flat<br />
and parallel within ±.000050 in over 6 in).<br />
W<br />
L<br />
Size<br />
Size<br />
Approx.<br />
in<br />
mm<br />
lbs. (kg)<br />
701-603 26685 3 x 3 x 3 75 x 75 x 75 5 (2.3 kg)<br />
701-604 26686 4 x 4 x 4 100 x 100 x 100 12 (5.5 kg)<br />
701-606 26687 6 x 6 x 6 150 x 150 x 150 40 (18.2 kg)<br />
Special sizes and cases available on request.<br />
G-26