Untitled - Swiss Instruments Ltd

ADVANCED METROLOGY PRODUCTS 2011
TESA MICRO-HITE
3D RECORDER
The Recorder CMM is the latest introduction to the
TESA MICRO-HITE 3D coordinate measuring machine
series. Newly developed TESA-REFLEX Recorder software
allows the operator to automatically record and reproduce
a program sequence of the machine displacements. Each
displacement can either be operated manually or using the
joystick and no preliminary programming is necessary.
Main Features
• Fast and easy workpiece alignment.
• Point-to-point part probing or manual scanning.
• ZMouse for significant time savings.
• Manual displacement in the 3 coordinate axes.
• Automatic reproduction of the manual machine displacement.
• Max. displacement (manual or automatic mode): 7.874 in/sec
(200 mm/sec).
• TESA-REFLEX Recorder application software.
• TESASTAR-i indexable probe head.
TESA MICRO-HITE 3D MANUAL
Available in two sizes: 454 and 474
• Fast and easy workpiece alignment.
• Point-to-point part probing or manual scanning.
• ZMouse for significant time savings.
• Fine adjust device.
• TESA-REFLEX MH3D software.
Main Features
• Three probe heads are available:
– TESASTAR with adjustable trigger force .
– Indexable Tesastar-i.
– Indexable Tesastar-i M8 with matching coupling thread
(optional).
19.685 in (500 mm)
19.685 in (500 mm)
27.559 in (700 mm)
2
3

ADVANCED METROLOGY PRODUCTS 2011
MICRO-HITE 3D
REMOTE CONTROL
Featuring three motors fully integrated and controlled with
a joystick, this remote version allows fine positioning to the
micron when checking small parts with complex geometry.
In manual mode, the machine permits high-speed displacement
in the three X, Y and Z coordinate directions. Equipped
with both TESASTAR-i and the REFLEX application software.
Main Features
• Motorized displacement in the three axes X/Y/Z at a
selectable speed of 1 µm/step, .39 in/sec. or .79 in/sec.
• Manual displacement in the three coordinate axes
at the max. speed of 30 in/sec.
• Fine adjust device.
• TESASTAR-i probe head, indexable.
• TESA-REFLEX software learned in a few hours.
• Joystick with integrated ZMouse.
TESASTAR
Swivelling probe head
fitted with a touch
trigger probe.
Part No. 03939020
EDP No. 29736
TESASTAR-i
High-precision probe head
that can be tilted through
168 positions without the
need for recalibration.
A specially designed indexing
capability allows the probe
to be repositioned in 15°
increments in two coordinate
directions. Single-handed
release for easy operation.
Part No. 03939030
EDP No. 29738
TESASTAR-i M8
Can be fitted with any type of
accessories featuring a M8
coupling thread, especially:
– every TESASTAR-mp for quick
swapping of the probe modules;
– the Tesastar-rp for measuring
applications requiring the use
of long styli up to 100 mm;
– the probe extension with
a length 50 mm.
Part No. 03939031
EDP No. 30511
27.559 in (700 mm)
19.685 in (500 mm)
MH3D Recorder MH3D RC MH3D RC MH3D-F MH3D-F MH3D-Fi MH3D-Fi
Model 454 454 474 454 474 454 474
Order number 03939169 03939122 03939120 03939042 03939242 03939043 03939243
Fine adjustment X √ √ √ √ √ √
Machine
Manual Motorized
Manual
Manual
Manual Manual Manual Manual
Displacement
Automatic
Motorized Motorized
Stand √ X X X X X X
Qualification sphere √ √ √ √ √ √ √
Probe Type TESASTAR-i TESASTAR-i TESASTAR-i TESASTAR TESASTAR TESASTAR-i TESASTAR-i
Software
TESA-REFLEX
Recorder
TESA-REFLEX
MH3D
TESA-REFLEX
MH3D
TESA-REFLEX
MH3D
TESA-REFLEX
MH3D
TESA-REFLEX
MH3D
TESA-REFLEX
MH3D
Packing dimensions
Length (in/mm) 53.15/1350 53.15/1350 55.12/1400 45.28/1150 55.12/1400 45.28/1150 55.12/1400
Width (in/mm) 53.15/1350 53.15/1350 62.2/1580 43.31/1100 62.2/1580 43.31/1100 62.2/1580
Height (in/mm) 86.6/2200 86.6/2200 86.6/2200 86.6/2200 86.6/2200 86.6/2200 86.6/2200
Weight
Net weight* (lb/kg) 496/225 463/210 695/315 463/210 695/315 463/210 695/315
Gross weight (lb/kg) 772/350 662/300 981/445 662/300 981/445 662/300 981/445
End strokes
X (in/mm) 17.32/440 18.11/460 18.11/460 18.11/460 18.11/460 18.11/460 18.11/460
Y (in/mm) 19.29/490 20.08/510 27.95/710 20.08/510 27.95/710 20.08/510 27.95/710
Z (in/mm) 15.35/390 16.54/420 16.54/420 16.54/420 16.54/420 16.54/420 16.54/420
Part weight
Maximum (lb/kg) 500/227 500/227 441/200 500/227 441/200 500/227 441/200
Part dimensions
X (in/mm) 22/560 22/560 22/560 22/560 22/560 22/560 22/560
Y (in/mm) 29.5/750 29.5/750 39/990 29.5/750 39/990 29.5/750 39/990
Z (in/mm) 19/483 17/430 17/430 17/430 17/430 17/430 17/430
Overall dimensions
X (in/mm) 40.5/1030 38.3/973 38.3/973 38.3/973 38.3/973 38.3/973 38.3/973
Y (in/mm) 43.3/1100 36.4/925 44.5/1130 36.4/925 44.5/1130 36.4/925 44.5/1130
Z (in/mm) 90/2310 (with stand) 66.9/1700 68/1730 64/1626 65.3/1660 64/1626 65.3/1660
Accuracy Given With TESASTAR-i or TESASTAR (Stylus Length 21 mm, Diameter 4mm)
MPEE (old U3) [µm] **Manual: 3+4L/1000 3+4L/1000 3+4L/1000 3+4L/1000 3+4L/1000 3+4L/1000 3+4L/1000
Automatic: 2.5+3.9L/1000
MPEP [µm] 3 3 3 3 3 3 3
R0 [µm] 2 - - - - - -
Velocity
Max [mm/s] 200
Manual: 760
Motorized: 1µ/step,
10 or 20
* Net weight describes the weight of the machine without the controller or stand.
** Manual specifications reached using the joystick.
Manual: 760
Motorized: 1µ/step,
10 or 20
760 760 760 760
4 5

ADVANCED METROLOGY PRODUCTS 2011
TESA-VISIO
precise optical measuring
The TESA-VISIO GL family provides users with a full
range of vision machines designed to meet their needs,
from the simple inspection job to the sophisticated
metrology application.
With a 200 x 100 mm measuring table, the manual
TESA-VISIO 200 GL will fulfil the expectations of
modern workshops.
Solidly built with a granite structure, TESA-VISIO 300 GL
is worth investing in. This version has a 300 x 200 mm
measuring table, and can either be operated manually or
using the servomotors (DCC).
Main Features
• Compact, ergonomic design – fruit of a thorough mechanical
investigation.
• Machine base and column in granite – ensure superior stability.
• TESA’s patented system for optical reading.
• Intuitive, user-friendly software tools made easily accessible.
TESA-REFLEX Vista
TESA-REFLEX Vision
06830401 06830428 06830601 06830634
Machine version 200 GL 200 GL 300 GL 300 GL
Order number 06830401 06830428 06830601 06830634
Displacements manual manual manual motorised
Manual zoom, indexable 6.5 x – – –
Motorised zoom – 6.5 x
6.5 x
6.5 x
12 x (optional PN 06830602) 12 x (optional PN 06830635)
Software TESA-REFLEX Vista TESA-REFLEX Vista TESA-REFLEX Vista TESA-REFLEX Vision
Ringlight 4 x 90° 4 x 90° 4 x 90° + 8 x 45° 4 x 90° + 8 x 45°
Coaxial light • • • •
TESA-VISIO 200 GL • • – –
TESA-REFLEX Vista or TESA-REFLEX Vision
will measure the highest number of geometrical
elements quickly and accurately.
Main Features
• Intuitive software tools.
• User-friendly, icon-based interface.
• Simple programming.
• Automatic measuring mode.
• True three-axis alignment.
• Visual comparison of the part against its CAO file
(Compar option available from TESA-REFLEX Vista).
The following two versions are supplied according
to used machine type:
• TESA-Reflex Vista for manual vision machines.
• TESA-Reflex Vision for DCC vision machines.
TESA-VISIO 300 GL – – • •
Displacements manual manual manual motorised
TESA-REFLEX Vista • • • –
TESA-REFLEX Vision – – – •
Measuring volume X/Y/Z (mm) 200 x 100 x 150 200 x 100 x 150 300 x 200 x 150 300 x 200 x 150
Encoder resolution X/Y/Z (µm) 0.05 0.05 0.05 0.05
Joystick controlled servomotors
in the 3 coordinate axes
– – – •
Machine base and column in granite • • • •
Fine adjustment in the Z-axis • • •
•
(through joystick)
X/Y measuring table in anodised aluminium (mm) 400 x 280 400 x 280 550 x 430 550 x 430
Thickness of the glass plate (mm) 10 10 10 10
Stage with possible resting attachment and
removable glass plate
• • • •
Max. load capacity (kg) 10 10 20 20
Precision
MPE X, Y
(E X
, E Y
) (µm) (L in mm)** 2 + 10 L/1000 2 + 10 L/1000 2 + 4 L/1000 1.6 + 4 L/1000
MPE XY
(EX Y
) (µm) (L in mm)** 2.9 + 10 L/1000 2.9 + 10 L/1000 2.5 + 4 L/1000 2 + 4 L/1000
MPE Z
(E Z
) (µm) (L in mm)*/** 2.9 + 10 L/1000 2.9 + 10 L/1000 2.9 + 5 L/1000 2.9 + 5 L/1000
* Mechanical precision ** m ≤ 5 Kg
6
7

ADVANCED METROLOGY PRODUCTS 2011
TESA-SCAN 52 REFLEX-Click
This model includes the ultimate power of all TESA-SCAN
machines, offering high technological performances combined
with unmatched ease of use and exceptional
price/quality relationship.
Thanks to the added functionality for automatic recognition
of the parts to be measured, the REFLEX-Click mode
allows them to be quickly and reliably inspected with a
single click. The colour coded classification of the measured
values enables the analysis of the measurement results at a
glance, rendering part inspection especially easy to execute.
Another unique function available in the REFLEX-Click mode
is the ability to measure lengths, diameters, angles and radii
speedily, making the machine ideally suited for use on the
shop floor.
Key Features
• Automatic measurement of lengths, diameters, angles and radii
using the REFLEX-Click function.
• Automatic recognition of the parts being measured or the programmes used.
• Intelligent detection of the relevant measurement zones.
• Management of the operator and programming modes.
• Value storage.
• Dynamic displaying of the measurement results.
• Flexible reporting.
TESA-REFLEX Scan Software
The TESA-REFLEX family has expanded through the addition of the
Scan version provided with intuitive graphical interface. The use of
the Composer mode allows complex measurements of geometrical
part features such as those listed below to be carried out in a simple way.
• Diameters • Angles
• Lengths • Chamfers
• Radii
• Parallel Threads
Equipped with a rotation axis available as an option, this machine
will let you inspect additional features such as:
• Runout
• Coaxiality
• Across-flats
Models TESA-SCAN 25 TESA-SCAN 50 TESA-Scan 50CE+ TESA-SCAN 50+
TESA-SCAN 52
TESA-SCAN 52
(w/Rotary Headstock)
TESA-Scan 80+
Part No. 02430000 02430010 02430030 02430040 02490090 02430091 02430060
EDP No. 29728 29730 42226 29732 NA 47050 28559
Measuring Capacity (D)
1 in/ 1.96 in/
1.96 in/
1.96 in/ 2.00 in/
2.00 in/
3.1 in/
25 mm 50 mm
50 mm
50 mm 52 mm
52 mm
80 mm
Measuring Capacity (L)
8 in/ 10.8 in/
10.8 in/
19.7 in/ 11.8 in/
11.8 in/
19.7 in/
200 mm 275 mm 275 mm 500 mm 300 mm 300 mm
500 mm
Component Capacity (D)
2.3 in/ 3.9 in/
3.9 in/
3.9 in/ 3.9 in/
3.9 in/
3.9 in/
59 mm 100 mm 100 mm 100 mm 100 mm 100 mm
100 mm
Component Capacity (L)
10.6 in/ 11.4 in/
11.4 in/
20.3 in/ 11.8 in/
11.8 in/
20.3 in/
270 mm 290 mm 290 mm 515 mm 300 mm 300 mm
515 mm
Resolution (D)
0.000004 in/ 0.000004 in/ 0.000004 in/ 0.000004 in/ 0.000004 in/ 0.000004 in/ 0.000004 in/
0.0001 mm 0.0001 mm 0.0001 mm 0.0001 mm 0.0001 mm 0.0001 mm 0.0001 mm
Resolution (L)
0.00004 in/ 0.00004 in/ 0.00004 in/ 0.00004 in/ 0.00002 in/ 0.00002 in/ 0.00004 in/
0.001 mm 0.001 mm 0.001 mm 0.001 mm 0.0005 mm 0.0005 mm 0.001mm
Accuracy (D)
.00006 in/ .00008 in/ .00008 in/ .00008 in/ .00008 in/ .00008 in/ .00009 in/
0.0015 mm 0.002 mm 0.002 mm 0.002 mm 0.002 mm 0.002 mm 0.002 mm
Accuracy (L)
0.0002 in/ 0.0002 in/ 0.0002 in/ 0.0002 in/ 0.0002 in/ 0.0002 in/ 0.0002 in/
0.005 mm 0.005 mm 0.005 mm 0.005 mm 0.005 mm 0.005 mm 0.005 mm
Repeatability ( D)
(±2s = 95%)
0.00004 in/
0.001 mm
0.00004 in/
0.001 mm
0.00004 in/
0.001 mm
0.00004 in/
0.001 mm
0.00004 in/
0.001 mm
0.00004 in/
0.001 mm
0.00004 in/
0.001 mm
Repeatablity (L)
(±2s = 95%)
0.0001 in/
0.0025 mm
0.0001 in/
0.0025 mm
0.0001 in/
0.0025 mm
0.0001 in/
0.0025 mm
0.0001 in/
0.0025 mm
0.0001 in/
0.0025 mm
0.00012 in/
0.003 mm
8
9

ADVANCED METROLOGY PRODUCTS 2011
TESASCOPE ® II 355H
For measurement of round and complex parts
These dedicated modular systems are made to measure
round and complex parts on the shop floor, as well as in the
metrology laboratory. They are provided with a TS-100,
TS-300 or TS-300E calculating and readout box.
Measured parts
Round and complex parts of all kinds that need to be
regularly inspected.
Features:
TESA-Scope II 355H
Meas. Table
8 x 4 in
200 x 100 mm
TS-100 TS-300
06830051 24792 TESA-Scope II 355H ✓ ✓
06830052 24793 TESA-Scope II 355H ✓ ✓
Telecentric Objectives 10x 20x 25x 31.25x 50x 100x
Catalog No. 06860001 06860002 06860003 06860004 06860005 06860006
Object-field 35 mm 17.5 mm 14 mm 11.2 mm 7 mm 3.5 mm
Working distance (W) 80 mm 82 mm 70 mm 56 mm 53 mm 43 mm
Maximum height (H) 100 mm 100 mm 100 mm 100 mm 100 mm 100 mm
Maximum diameter (D) 200 mm 200 mm 200 mm 200 mm 200 mm 200 mm
Objective length (C) 37 mm 35 mm 47 mm 61 mm 64 mm 74 mm
Max. width of component
165 mm
X=Y-(W+C)
165 mm 165 mm 165 mm 165 mm 165 mm
• 14” (355 mm) diameter rotary screen with chart clips,
cross line 30°, 60°, 90°.
• Solid steel construction.
• Profile illumination with green filter.
• Fiber-optic surface illumination.
• “Save Lamp” system (lamps switch off automatically if there is no stage
movement during several minutes, increasing the life of the bulb).
• Quick change bayonet lens mount (lenses not included).
• RS-232C output for data transfer.
• Drawings side mount.
• Hard anodized stabilized stage with clamping slot for tooling, equipped
with linear glass scales with 0.0001 in/0.001 mm resolution.
• Focus travel: 3.15” (80 mm).
• Maximum weight on stage: 20 lbs (10 kg).
• Built-in angular readout (degrees/minutes).
• TESA calibration certificate.
• Dimensions: 36” x 43” x 51” (L x H x D)/500 x 912 x 1093 mm.
• Weight: 240 lbs (110 kg).
• Power supply: 110 Vac – 50 Hz/230 Vac.
TS-300E
06830053 24794 TESA-Scope II 355H ✓ ✓
Meas. Table
TESA-Scope II PLUS 355H
12 x 4 in
300 x 100 mm
06830054 24795 TESA-Scope II PLUS 355H ✓ ✓
06830055 24796 TESA-Scope II PLUS 355H ✓ ✓
06830056 24797 TESA-Scope II PLUS 355H ✓ ✓
35.91”
H
X
10.32” 11.22”
19.66”
41.22”
M
D
Y = 11.10”
W
11.10”
C
43.04”
TESASCOPE ® II 300V
Reliable and dependable
The high quality of the projected image provides the operator
with reliability and dependability for accurate measurements.
A wide choice of accessories adds to the remarkable
flexibility of these optical systems with modular design.
The multiple configurations allow any geometric part
feature to be easily measured.
Measured parts
These profile projectors are ideally suited for non-contact
measurement of components that require a magnification
up to 100x – whatever their material or their shape.
Features:
TESA-Scope II 300V
Meas. Table
8 x 4 in TS-100 TS-300 TS-300E
200 x 100 mm
06830041 22832 TESA-Scope II 300V ✓ ✓
06830042 22826 TESA-Scope II 300V ✓ ✓
06830043 22827 TESA-Scope II 300V ✓ ✓
Meas. Table
TESA-Scope II 300V PLUS
12 x 6 in
300 x 150 mm
06830044 23116 TESA-Scope II 300V PLUS ✓ ✓
06830045 23170 TESA-Scope II 300V PLUS ✓ ✓
06830046 23171 TESA-Scope II 300V PLUS ✓ ✓
Telecentric Objectives 10x 20x 25x 31.25x 50x 100x
Catalog No. 06860001 06860002 06860003 06860004 06860005 06860006
Object-field 30 mm 15 mm 12 mm 9.6 mm 6 mm 3 mm
Working distance (W) 80 mm 82 mm 70 mm 56 mm 53 mm 43 mm
Maximum height (H) 83 mm 83 mm 83 mm 83 mm 83 mm 83 mm
Maximum Diameter (D) 166 mm 166 mm 166 mm 166 mm 166 mm 166 mm
Objective length (C) 37 mm 35 mm 47 mm 61 mm 64 mm 74 mm
*Lens sold separately
• 12” (300 mm) diameter rotary screen with chart clips,
cross line 30°, 60°, 90°.
• Solid steel construction.
• Profile illumination with green filter.
• Fiber-optic surface illumination.
• “Save Lamp” system (lamps switch off automatically if there is no stage
movement during several minutes, increasing the life of the bulb).
• Quick change bayonet lens mount (lenses not included).
• RS232C output for data transfer.
• Drawings side mount.
• Hard anodized stabilized stage with clamping slot for tooling, equipped
with linear glass scales with 0.0001 in/0.001 mm resolution.
• Focus travel: 4” (100 mm).
• Maximum weight on stage: 20 lbs. (10 kg.).
• Built-in angular readout (degrees/minutes).
• TESA calibration certificate.
• Dimensions: 20” x 41” x 31” (L x H x D)/508 x 1042 x 788 mm.
• Weight: 240 lbs (110 kg).
• Power supply: 110 Vac – 50 Hz/230 Vac.
D
41.06”
33.30”
C
W
H
10.47”
29.02”
27.56” 19.69”
*Lens sold separately
10
11

ADVANCED METROLOGY PRODUCTS 2011
TESA MULTI-GAGE
Portable precision within easy reach
• Six-axis portable CMM with a 1.2m measuring volume.
• Innovative counterweight design for easy-handling.
• Ergonomic wrist design with intuitive, easy-to-reach buttons.
• Plug-and-measure probes, pre-calibrated from factory.
• Effortless installation and automatic report generation.
• Internal battery and optional Wi-Fi provide maximum portability.
• Featuring TESA-REFLEX MULTI-GAGE Control Panel.
TESA MULTI-GAGE
comes complete with:
• 6-axis TESA MULTI-GAGE.
• Two interchangeable probes with either
a 6 or 15 mm diameter ruby ball tip.
• Automatic probe recognition during
probe assembly.
• Complete set with sphere for
probe qualification.
• Rechargeable batteries.
• Power cable.
• TESA-REFLEX MULTI-GAGE
control panel.
• TESA MULTI-GAGE application
software.
• USB cable.
• One-year warranty.
• Standard case for safe
transportation.
Optional Accessories
• Magnets set.
• Wi-Fi capability.
• Steel ball probes.
• Tapered probes.
• TESASTAR-rp touchtrigger probes.
• Solid case for safe transportation.
Precision
MPEE = 5 + L/40 ≤ 18 (µm)
MPEP = 8 µm L in mm
Optional Wi-Fi
capability
Part Number EDP Number Description
03920000 42148 TESA MULTI-GAGE
12
13

ADVANCED METROLOGY PRODUCTS 2011
TESA MICRO-HITE Motorized
The speed of a manual height gage combined with
the precision of a motorized height gage
Consisting of:
• Micro-Hite main instrument.
• Standard insert holder.
• Standard insert with 5mm carbide ball tip.
• Master for determining probe constant.
• Built-in air cushion.
• 1 battery pack.
• 1 power supply.
• Dust cover.
• Instruction manual.
(control panel sold separately)
Power Panel Plus M
(00760220 and 00760221)
• Single Axis and 2D Measurement.
• Single Contact and 2 Probe Contact Measurement.
• Polar and Rectangular Coordinates Measurement.
• Chain Dimensioning with Single Probe or 2 Probes.
• Angle Measurements in Two Points.
• Bolt Hole Pattern Analysis.
• Point Translation, Point Creation
Capability.
• Perpendicularity (using optional
IG-13 Probe).
• 999 Feature Memory Capability.
• Flexible Reporting of Measured
Values and Adjustable Header Information.
• SPC Capabilities.
• Rotation of Alignment in X Axis.
• Automatically Runs Parts Programs.
• Adjustable Probe Retraction.
• Plug in Calipers, Micrometers and Transfer Data.
• Temperature Compensation Capability.
• Greater External Printer Selection.
TESA MICRO-HITE
The metrological standard for electronic
height gages in the workshop
Consisting of:
• Micro-Hite main instrument.
• Standard insert holder.
• Standard insert with 5mm carbide ball tip.
• Master for determining probe constant.
• Electric air pump for air cushion
(installed in main instrument).
• 1 battery pack.
• 1 main adaptor.
• Dust cover.
• Instruction manual.
(control panel sold separately)
MICRO-HITE (Manual)
Control Panels-
Power Panel (00760163)
• Single Axis and 2D Measurement.
• Single Contact and 2 Probe Contact Measurement.
• Polar and Rectangular Coordinates Measurement.
• Chain Dimensioning with Single Probe or 2 Probes.
• Angle Measurements in Two Points.
• Bolt Hole Pattern Analysis.
• Point Translation, Point Creation Capability.
• Perpendicularity (using optional IG-13 Probe).
• Go, No-Go Lights.
• PCMCIA Memory Card Technology.
• Programmable.
Part No.
EDP
No.
00730063 29275
00730064 29276
00730065 29276
MICRO-HITE
Plus M Model
M-H Plus
M 350
M-H Plus
M 600
M-H Plus
M 900
Measuring
Span in/mm
Application
range with
standard
accessory
(in/mm)
Application
range with
S07001622
probe insert
holder (in/mm)
14 in/365 mm 20 in/520 mm 29 in/745 mm
24 in/615 mm 30 in/770 mm 39 in/995 mm
36 in/920 mm 42 in/1075 mm 51 in/1300 mm
Accuracy
(L in in/m)
(2 + 1.5 • L) μm (L in m)
(0.0001 + 0.0000015• L) in
(L in in)
(2 + 1.5 • L) μm (L in m)
(0.0001 + 0.0000015 • L) in
(L in in)
(2 + 1.5 • L) μm (L in m)
(0.0001 + 0.0000015 • L) in
(L in in)
00760221 29283 Power Panel Plus M
00760220 29282 Power Panel Plus M with Built-in Printer
Repeatability
on Flat
Surface
(2s in/µm)
0.000025
in/0.5µm
0.000025
in/0.5µm
0.000025
in/0.5µm
Repeatability
Within Bore
(2s in/µm)
Perpendicularity
error - mechanical,
frontal (in/µm)
0.00005 in/1 µm 0.0002 in/5 µm
0.00005 in/1 µm 0.00028 in/7 µm
0.00005 in/1 µm 0.00035 in/9 µm
Models
Manual
version
Application
range with
standard
accessory
(in/mm)
Application range
with S07001622
probe insert holder
(in/mm)
Measuring
Accuracy
Part No. EDP No.
span in/mm
(in/mm)
(2 + 3 • L) μm (L in m)
00790033 29272 M-H 350 14 in/365 mm 20 in/520 mm 29 in/745 mm (0.0001 + 0.000003 • L) in
(L in in)
(2 + 3 • L) μm (L in m)
00790034 29273 M-H 600 24 in/615 mm 30 in/770 mm 39 in/995 mm (0.0001 + 0.000003 • L) in
(L in in)
(2 + 3 • L) μm (L in m)
00790035 29274 M-H 900 36 in/920 mm 42 in/1075 mm 51 in/1300 mm (0.0001 + 0.000003 • L) in
(L in in)
00760163 29280 Power Panel
Repeatability
(in/µm)
2δ = ≤1 μm /
≤0.00005 in
2δ = ≤1 μm /
≤0.00005 in
2δ = ≤1 μm /
≤0.00005 in
Perpendicularity error -
mechanical, frontal
(in/µm)
0.00028 in/7 µm
0.00035 in/9 µm
0.00043 in/11 µm
14
15

ADVANCED METROLOGY PRODUCTS 2011
TESA-HITE
Electronic Height Gages
Over 25 years of technology and innovation have produced
the TESA-HITE family of height gages, offering exceptional features
at an affordable price. The newest addition to the TESA-HITE family,
the TESA-HITE Plus m, offers increased accuracy, a built in air cushion,
and a new ergonomically designed control panel providing geometric
functions for 1D and 2D measurement.
All TESA-HITE height gages offer a generous 400mm and 700mm measuring span
and their electronics are completely protected against liquid and dust penetration.
Automatic diameter measurements can be taken using TESA’s patented system for
determining the culmination point and TESA-HITE height gages make it easy
to capture parallelism errors.
Featuring:
• 16” (400 mm) and 28” (700 mm) measuring range.
• Electronics completely protected against liquids or
dust penetration.
• Automatic diameter measurement using TESA’s
patented system which determines the culmination point.
• Parallelism and perpendicularity measurements.
• TESA opto-electronic measuring system (patented).
• Compatible with TESA MICRO-HITE accessories, including
measuring inserts and holder.
• SCS calibration certificate delivered with each instrument.
TESA-HITE plus m
400 and 700:
• Built-in air bearing.
• New ergonomically designed control panel, available
with built-in printer.
• Easy-to-use, intuitive power control.
• Geometric functions for 1D or 2D measurements.
• Automatic programming and generation of the measurement cycles.
• Statistical data processing.
• Opto-electronic TESA measuring system, patented.
• A variety of accessories compatible with all other height gages
made by TESA.
• SCS calibration certificate provided free of charge.
• Plus, of course, the guarantee to get a truly SWISS MADE product!
The NEW
Generation
TESA-HITE Magna 400/700
Made to withstand severe
workshop conditions.
• Shop proof technology.
• Long measuring span
and rugged design.
Fully protected
against:
TESA-HITE 400/700
• Completely new design
featuring built-in air
cushion and fixed panel.
• Parallelism and
perpendicularity
measurements.
Technical Data TESA-HITE MAGNA TESA-HITE TESA-HITE Plus m
400 700 400 700 400 700
Part No. 00730047 00730059 00730043 00730044
With
printer
00730057
Without
printer
00730045
With
printer
00730058
Operating temperature
10°C to 40°C 10°C to 40°C 10°C to 40°C
range
16 17
• Water.
• Oils.
• Dust.
Without
printer
00730046
EDP No. 28260 28261 24675 24676 35362 35359 35363 35360
Measuring span 16 in/415 mm 28 in/715 mm 16 in/415 mm 28 in/715 mm 15.95 in/405 mm 27.75 in/715 mm
Application range with
standard insert holder
00760143
Application range with
insert holder 00760057
Application range with
insert holder S07001622
Max. perm. error
Repeatability
Resolution
Max. deviation in
perpendicularity (frontal)
Shop-Proof
Technology
22 in/570 mm 34 in/870 mm 22 in/570 mm 34 in/870 mm 22 in/560 mm 33 in/860 mm
0 - 24 in /0 -
625 mm
0 - 24 in /0 -
625 mm
0 - 36 in/0 -
925 mm
0 - 36 in/0 -
925 mm
< 8 µm / < 0.0003 in
2s=

ADVANCED METROLOGY PRODUCTS 2011
TESA RUGOSURF 10G TESA RUGOSURF 20
Surface Roughness Gage
Portable Surface Finish Instrument
RUGOSURF 10G is a portable and versatile
roughness gage that can be used in the
workshop for incoming inspection or in
the laboratory. This heavy-duty hand-held
tool offers a wide range of accessories and can be used
in a number of applications.
Complete with:
• Roughness Specimen, Ra = 117 µin/2.97 µm.
• Rechargeable battery 7.2 V, 300mAh, NiMh PP3 format.
• SB10 standard probe type.
• Battery charger.
• Adapter for standard stand with 8mm diameter.
• Positioning support.
• Instructions for use with a declaration of conformity.
TESA Technology-
Genuine Swiss Made Quality
Product Part No. EDP No.
TESA RUGOSOFT 10G 06930011 24720
TESA RUGOSOFT Software
Complete with:
- CD ROM for installation in 5 languages
- USB Connection Cable for RUGOSURF 10G
- On-line instruction Manual (included on installation CD)
06960034 23126
Optional Probes
SB10
For regular surface finish and bores.
External diameters > .4”/10mm and internal diameters from 25”/6mm.
SB20
For slots with depths up to .2”/5mm max.
SB30
For small bores with a 15”/4mm minimum diameter, .8”/20mm in depth.
SB40
With a prismatic contact skid for measuring cables. External diameters > .04”/1mm.
SB50
With front mounted contact skid for inspecting concave surfaces.
Ideal for measuring through to 90°
Standard Accessories
Technical Data
Table of measured roughness parameters
International Standards
ISO 4287 Ra Rq Rt Rz Rp Rv Rc RSm Rðc Rpc
1997 Rk Rpk Rvk Mr1 Mr2
Pa Pq Pt Pp Pv Pc Psm Pðc Ppc
Din Rmax R3z R3zm
ISO 12085 R AR Rx Rke Rpke Ryke
Measuring range
0-0.015in/0-400µm
Resolution
0.01µin/0.001µm
Cut-offs (Ic in in) 0.01 in 0.03 in 0.1 in
Total length (Im in in) 0.05 in 0.15 in 0.5 in
Traversing length (Ic in in) 0.06 in 0.18 in 0.6 in
Possible selection of 1 to 10 cut-offs for the measurement
(length from 0.75 to 16 mm)
06960036 23128
06960037 23129
06960038 23130
06960039 23131
06960040 23132
Easy-to-Use surface roughness gage with a wide choice of
accessories for measuring workpieces of many shapes and forms.
TESA RUGOSURF 90G Roughness Gage
Small-size, versatile roughness test, providing maximum ease of
use. Ideally suited for high-precision measurements on the shop
floor or in the measurement laboratory.
• Measure roughness parameters according to ISO
4287, 12085 (CNOMO), 13565, DIN 4776 and JIS
B060: 2001.
• TFT tactile color display, 3.5”.
• Three straight function keys.
• Graphical interface.
• Direct displaying of the measured
values and computed profiles.
• Measuring range 50 mm / 2 in.
• Measuring span 1000 μm.
• Interchangeable probe stylus, with
or without contact skid.
• Possible tolerancing of parameters.
• USB digital output for data transmission to a PC.
Technical Data
Measured
parameters:
Ra - Rq (RMS) - Rt - Rz - Rc - Rsm - Rmr - Rmax
- RPc - PPc
Calculated as per ISO 4287-1 Pt - R - Rx - AR. Calculated as per ISO 12085 (CNOMO)
Measuring spans:
0-0.015in/0-400µm
Resolution:
0.01µin/0.001µm
Cut-offs:
c = 0.25 - 0.8 - 2.5 mm. Choice between
1 to 5 cut-offs for the relevant measurement
Filter: GAUSSAN according to ISO 11562
Cut-off length lc:
Number of cut-offs x c (0.5 to 12.5 mm)
Total length lt:
Number of cut-offs + 1 x c (0.75 to 15.0 mm)
Inductive probe: 5 µm, 90°
Measuring force: 0.75 mN (ISO 3274)
Calibration function: Using reference specimen Ra = 2.97 µm
RS 232 data output: For data transmission to Rugosoft 10 software
Part No. EDP No. Description
06930013 NA Rugosurf 20
06960034 23126 Rugosurf 10 Software
Technical Data
Table of measured roughness parameters
International Standards
ISO 4287 Ra Rq Rt Rz Rp Rv Rc RSm Rðc Rpc
1997 Pa Pa Pt Pp Pv Pc PSm Põc Ppc
Wa Wq Wt Wz Wp Wv Wc WSm Wõc Wõc
Rk Rpk Rvk Mr1 Mr2
Din Rmax R3z R3zm
ISO 12085 Pt R AR Rx Wte AW Wx Rke Rpke Rvke
18
Support with Granite Base, 15.75” x 9.85” (400mm x 200mm) 06960035 23127
Roughness Specimen, Ra = 117 µin/2.97 µm 06960041 23133
External Control Switch 06960042 23134
Additional accessories available upon request.
Part No. EDP No. Description
06930012 29441 Rugosurf 90G
06960048 29445 TESA Measurement Studio
19

As Hexagon Metrology, Inc., is constantly improving the design of its
products, the appearance, specifications, dimensions and
weights are subject to change without notice.
©2011 Hexagon Metrology, Inc., All Rights Reserved.
PMI-924 07/2011