MICRO-HITE®plus M Electronic Height Gage - Swiss Instruments Ltd

Height Gages
MICRO-HITE® plus M
Electronic Height Gage
MICRO-HITE
main instruments
350 / 600 / 900
✓
Factory
standard
Measuring span,
application range and
accuracy as shown on
page K-12
The MICRO-HITE plus M Electronic
Height Gage combines the positioning
speed of a manual height gage
with the precision and user friendliness
of a motorized height gage for
improved inspection throughput and
operator productivity. With the exclusive
TESA rotary power feature,
users can switch between manual
and motorized operation with no loss
of measurement accuracy.
A simple-to-use keyboard controls 1D
measurement operations. Large,
clear icons guide operators easily
through flat surface and diameter
measurements. It is available with a
Power Panel that incorporates 2D
measuring capability, plus the ability
to store part programs. Special
mechanical alignment allows the
MICRO-HITE plus M Electronic
Height Gage to be used in combination
with a test indicator to quickly
and accurately inspect the squareness
of parts on a surface plate. An
on-board microprocessor automatically
compensates for the probe size,
calculates the size of slots and projections,
and determines the centerlines
of features. All MICRO-HITE
probe holders and probes, as well as
CAPAX 2000 probes can be used
with the MICRO-HITE plus M
Electronic Height Gage.
MICRO-HITE plus M Features
• Constant measuring force of 1N.
• Available in measuring ranges of
14"/365 mm, 24"/615 mm or
36"/920 mm.The measuring range
can be extended with optional
insert holders.
• Rotary power control.
• Built-in air bearing for effortless
movement across the surface plate.
• Computer-Aided Accuracy (CAA).
• Coefficient of linear expansion
matches steel.
• RS-232 data output.
• SCS calibration certificate.
Rust-inhibitor
cast iron base with
3 ground circular faces
in hardened stainless
steel
Air cushion
for easy movement
of the height gage
across the surface plate
Frontal,
for models
350 < 6 μm
600 < 8 μm
900 < 12 μm
Incremental
glass scale
with reference point,
dividing period of 20 μm.
Opto-electronic value
capture (TESA patent).
11.5 x 10 -6 K -1
Measuring head
mounted on a
ball-bearing and displaced
by means of both
the knurled wheel and
crank. Drive system can
be locked or tightened.
Fine adjust can also be
additionally mounted.
Available as an option.
Automatic value capture
with a constant measuring
force. Visual and
acoustic signal for
acknowledgment.
12 in / s
300 mm / s
1.6 ± 0.25 N
(at switch point)
RS-232,
opto-electronic
SCS calibration
certificate
K-10

Height Gages
Rechargeable
battery pack,
6 V, 3,0 Ah or
mains adapter 110 to
240 Vac/50 to 60 Hz
≈ 12 hours after
full recharging
(8 hours)
50 °F to 104 °F
10 °C to 40 °C
14 °F to 140 °F
–10 °C to 60 °C
TESA MICRO-HITE® plus M
Unmatched Measuring Power,
Performance and User-Friendliness
Measuring without change of the probe direction
Probe constant excluded
80%, with no condensation
IP40
(IEC 60529)
h1
h2
h4
EN 61326-1,
Class B
(with disconnected charger)
Net weights (without
panel
and battery pack)
main part 350: 73 lb
600: 84 lb
900: 209 lb
h3
Measuring with change of the probe direction
With probe constant included
– without storage of the culmination
point
– with storage of the culmination
point
Shipping
packaging
Identification
number
SCS
calibration
certificate
h1
h2
h4
b2 b1
h3
h1
h2
2 1
h3
Measuring in two coordinate directions
0
YW
Y
0
0
TESA μ System
0
0
X
YG
0
XG
XW
with TESATAST
Establishing form and position errors
.../L
Parallelism
error
Run-out
error
.../L
«max.»
«min.»
and – with TESA IG-13
«max.-min.»
K-11

Height Gages
TESA MICRO-HITE® plus M
350 / 600 / 900 in Sets
00730063 29275 TESA MICRO-HITE plus M Set 350
00730064 29276 TESA MICRO-HITE plus M Set 600
00730065 29277 TESA MICRO-HITE plus M Set 900
Each set consists of the following components, without control panel:
00730060 1 TESA MICRO-HITE plus M main instrument ●
00730061 1 TESA MICRO-HITE plus M main instrument ●
00730062 1 TESA MICRO-HITE plus M main instrument ●
07.60143 28748 1 Standard probe insert holder C ● ● ●
07.60062 42568 1 Standard probe insert with a
5 mm dia. ball tip B ● ● ●
07.60219 28747 1 Master piece with nominal size
0.25 in/6.35 mm A ● ● ●
00760142 1 Electric pump already mounted for generating
the air cushion beneath the gage base ● ● ●
07.60141 86715 1 Battery pack ● ● ●
47.61054 88187 1 Mains adapter, 110 to 240 Vac/50 to 60 Hz ● ● ●
47.61056 88188 1 Cable US for mains adapter ● ● ●
07.60151 86960 1 Dust cover for TESA MICRO-HITE plus M ●
07.60152 86959 1 Dust cover for TESA MICRO-HITE plus M ●
07.60153 86958 1 Dust cover for TESA MICRO-HITE plus M ●
K-12
00760219
00760062
00760143
Technical Data A B C
Models 350 600 900
in 14 24 36
mm 365 615 920
in 0 – 20 0 – 30 0 – 42
With standard accessory mm 0 – 520 0 – 770 0 – 1075
in 0 – 22 0 – 32 0 – 44
With probe insert holder No. 00760057 mm 0 – 575 0 – 825 0 – 1130
in 0 – 29 0 – 39 0 – 51
With probe insert holder No. S07001622 mm 0 – 745 0 – 995 0 – 1300
(0.0001 + 0.0000015 · L) in (L in in)
With standard accessory (2 + 1.5 · L) μm (L in m)
With standard accessory
on flat surf.: 2 s ≤ 0.5 μm – 2 s ≤ 0.000025 in
within bores: 2 s ≤ 1 μm – 2 s ≤ 0.00005 in
Mechanical (frontal)
Frontal and lateral using a digital handtool μm 5 7 9
We have
changed the
ordering structure
for Micro-
Hite Gages to
reflect a component
based
ordering system
rather than a kit.
Please contact
our customer
service team at
800- 283- 1883
for any assistance
needed.

Height Gages
1D Control Panel
✓
LC display,
2.6 x 1.3 in /
67 x 33 mm
in size. 3-line display
(alpha numeric) plus
graphical symbols.
7-decade value display
plus minus sign.
Both auxiliary displays 1
and 2 have 7 or 4 signs
.4 x .2 in /
10 x 4.9 mm
(values) or
.3 x .15 in / 7.5 x 3.7 mm
and 5 x 2.5 mm
(displays 1 and 2)
Keypad with
20 softkeys
See technical
data on page
K-12
in/mm
conversion
PRESET
function
to enter
a known value.
Acoustic signal.
Choice of 7 languages
for report headings
RS-232, optoelectronic
and
bi-directional
TESA MICRO-
HITE plus M
IP50 (IEC 60529)
✓
POWER PANEL plus M
✓
LC dual display,
5 x 2.5 in /
128 x 63 mm
in size.
• Length measurement:
value display (7 segment/
sign) plus graphic symbols
for the functions
(upper part)
• Straightness or perpen -
dicularity measurement:
display for values and
symbols (function keys)
plus operator controlled
operations (full dot display).
7-decade value display plus
minus sign
.5 x .25 in /
12.7 x 6.4 mm
main display,
.25 x .165 in / 6.3 x 4.2 or
.15 x .11 in / 3.8 x 2.9 mm
secondary display
Keypad with
42 softkeys
Acoustic signal.
See opposite
mm/in
conversion
PRESET
function to enter
a known value.
Manual or automatic
triggering of data transfer.
Output of prede fined reports
with custom ized headings
(5 languages available)
using an external printer
(A4 format).
Opto-electronic
RS-232
bi-directional and
Centronics
TESA MICRO-
HITE plus M
IP50 (IEC 60529)
✓
Control panels available for
TESA MICRO-HITE® plus M
350 / 600 / 900
1D Control Panel
POWER PANEL plus M
00760216 29281 TESA control panel “1D”
Includes a part program for measuring in one coordinate
direction. Also used for parallelism and runout inspection.
0.00001 / 0.0001 in
0.0001 / 0.001 mm
00760221 29283 TESA control panel “POWER PANEL plus M”
Includes a part program for measuring in 1 or 2 coordinate
directions.
• Captures flatness and parallelism errors.
• Measures any deviation in perpendicularity or straightness.
• Executes angle measurement.
• Value input through the keypad with possible use of a digital
handtool.
• Automatic programming of the measurement cycles in
mode “Teach-in”. Up to 9999 features distributed in
several part programs (each including max. 999 values) can
be stored in the memory.
• Memory capacity for up to 25,000 measured values.
• SPC data capability with output of the mean value, range,
standard deviation, histogram, comparison of nominal value
to actual value, number of out-of-tolerance values, control
limits, control charts.
• Prints reports in A4 format with related tables and graphics.
Creates tailor-made headings to suit users’ needs.
0.00001 / 0.0001 / 0.001 in
0.0001 / 0.001 / 0.01 mm
00760220 29282 TESA control panel “POWER PANEL plus M
with printer”
Same as No. 00760221, but with built-in matrix printer for
data output.
Optional accessory available for TESA Power Panel plus M
with built-in printer
04765008 Thermal paper roll, 57 mm wide
K-13