Hose and Flexible Tubing (MS-01-180;rev_6;en-US) - Swagelok

Hose and Flexible Tubing 83
Options
Covers
Covers do not change hose technical data.
Fire Jacket (Option F)
■ Woven fiberglass coated with specially
compounded aerospace-grade silicone
rubber.
■ Resists many hydraulic fluids and
lubricating oils.
■ Provides insulation from internal
system fluid temperature extremes.
■ Operating temperature: −65 to 500°F (−53 to 260°C) with
short-term flame exposure to 2000°F (1093°C).
Thermosleeve (Option F1)
■ Braided fiberglass with saturated
synthetic material coating.
■ Creates a barrier that prevents direct
contact with the hose and resists
abrasion.
■ Protects hose from weld splatter and
resists effects of UV light.
■ Operating temperature: up to 1000°F (537°C).
Armor Guard (Option A)
■ Interlocking, flexible 302 stainless steel.
■ Highly flexible, protects against kinking
and abrasion.
■ Covers entire length of hose.
■ Operating temperature: –325 to 750°F
(–200 to 398°C).
Spiral Guard (Options G6, G7, and G8)
■ Helical HDPE plastic.
■ Highly flexible, protects against
abrasion.
■ Covers entire length of hose.
■ Operating temperature: –180 to 250°F
(–117 to 121°C).
■ Standard colors are blue, black, and yellow.
316 Stainless Steel Material (Option Z)
■ Replaces standard 304 stainless steel
overbraid with 316L stainless steel and
300 series stainless steel collar with
316 stainless steel
■ Provides greater corrosion resistance.
Spring Guard (Options S and S2)
■ Helical 302 stainless
steel.
■ Highly flexible, protects Hose-Length Spring Guard
against kinking and
abrasion.
■ Hose-length version
covers entire length of
6-in. Long Spring Guard
hose (option S).
■ Six-inch-long version protects each end of hose
(option S2).
■ Operating temperature: –325 to 850°F (–200 to 454°C).
Testing
These tests are in addition to the standard testing performed
on each hose series.
Helium Leak Testing (Option H7)
■ Inboard helium leak tested to a maximum leak rate of
1 10 –7 std cm 3 /s.
■ Test certification included with order.
Hydrostatic Testing (Option W)
■ Hydrostatic pressure test to 1.5 times the rated working
pressure of the hose at 70°F (20°C) with no visible leakage.
■ Test certification included with order.
■ Customer-specified testing is available; contact your
authorized Swagelok representative.
Nitrogen Pressure Testing (Option N3)
■ Nitrogen gas bubble leak test at 200 psig (13.7 bar), not to
exceed 1.5 times the rated working pressure of the hose at
70°F (20°C) with no visible leakage.
■ Test certification included with order.
■ Customer-specified testing is available; contact your
authorized Swagelok representative
See next page for tags and approval options.