Chapter 1 - Pacific Communications
Chapter 1 - Pacific Communications
Chapter 1 - Pacific Communications
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Network Video Recorder<br />
<strong>Chapter</strong> 7 — Event Handling<br />
You can monitor video from a camera where an event is detected and play back event-recorded video. Event<br />
related functions may not be supported depending on the protocol that the device uses and device model<br />
(supported protocols: SiRiS protocol, some versions of the Axis/Panasonic WV (DG)/ONVIF TM Conformance<br />
protocols). Ask your dealer or distributor for details.<br />
First, check the following.<br />
• Devices should be added to a device group. Refer to <strong>Chapter</strong> 11 — Device Management (p. 93) for<br />
details.<br />
• There should be recorded data in the allocated storage. Refer to <strong>Chapter</strong> 13 — Storage Management<br />
(p. 113) for details.<br />
• The event detection functions of the device should be enabled.<br />
7.1 Handling a Monitoring Event<br />
You can monitor live video from a camera where an event is detected or play back event-recorded video<br />
if video of the selected event has been recorded.<br />
The event list displays live and callback events from the registered devices. The<br />
callback events are listed only when the remote callback function is set up in the<br />
device.<br />
You can change the options of the event list display during Menu – Preference<br />
Settings. Refer to 3.3 Client, Menu – Preference Settings (p. 34) for details.<br />
The description of event icons which are displayed in the event list is as follows<br />
(some event icons may not be supported, depending on the specifications and version<br />
of the device):<br />
Motion Detection Video Blind Video Loss<br />
Object Detection Audio Detection Video Analytics Detection<br />
Trip-Zone Tampering Text-In<br />
/ Alarm-In On/Off / Alarm-In Bad/Good / External Storage In/Out<br />
/ Device Connected/Disconnected System Boot Up<br />
System Alive System Restart System Shut Down<br />
Recorder Bad Disk S.M.A.R.T. Disk Bad<br />
Disk Full Disk Almost Full Disk Config Change<br />
Disk Temperature / Panic Recording On/Off / Fan Error On/Off<br />
Monitoring Video<br />
Monitoring video from a camera where an event is detected is supported in the Live panel (maximum 4).<br />
If a Live tab is not on the tab panel, go to the System menu, click New Tab and Live.<br />
81
Change language