Chapter 1 - Pacific Communications
Chapter 1 - Pacific Communications
Chapter 1 - Pacific Communications
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Network Video Recorder<br />
• Disable Desktop Window Manager (DWM): Disables Desktop Window Manager (DWM) that runs<br />
Windows Aero. Disabling DWM is recommended if video often freezes when multiple monitors are used.<br />
• Dynamic Multistream Control: Allows you to use a different stream depending on the screen format<br />
(supported only for devices in which more than one stream is used). Selecting Auto allows the SiRiS<br />
program automatically to choose the proper stream based on the screen format.<br />
• Interactive Bandwidth Control: Controls the network bandwidth by automatically adjusting the<br />
resolution and the frame rate of the device depending on a screen format (1x1 screen format: the maximum<br />
resolution and frame rate supported by the device, Multi-screen format: the resolution and frame rate<br />
decreased to an appropriate level for each screen format). This function enhances the network bandwidth<br />
efficiency and decreases a drop in performance of the Client system which might be caused by the network<br />
congestion. For this function to work, the device must be also set up to use the function. This function<br />
works only for monitoring video.<br />
Log List<br />
• Number of results displayed on the list: Set<br />
up the number of log entries to be displayed at<br />
once (in the case of Device Log, maximum<br />
100 logs at once regardless of the setting).<br />
• Update Interval: Set up the status update<br />
interval in the Device Check panel.<br />
Instant Event<br />
• Time Range: Set up the length of time for an<br />
event notification to be displayed in the Instant<br />
Event List after notification of the event detection<br />
(If the event list has 100 or fewer items, the event<br />
list will remain on the Instant Event List even<br />
if the length of time has expired).<br />
• Column: Select the information to be displayed<br />
in Instant Event List.<br />
• Callback Port: Set up the port number to receive<br />
a callback message from the device. This setting<br />
will be used only when the monitoring service<br />
does not run. The NVR system uses the callback<br />
port of the monitoring service, which is set in the<br />
Service Manager program when the monitoring<br />
service runs. The port number you enter should<br />
match the port number set on the device for<br />
remote callback.<br />
• Live Text-In Time Range: Set up the length of time for a text-in data to be displayed when a text-in<br />
event occurs. You can check the text-in data in the text-in viewer window within the time range since<br />
the text-in event occurred. Refer to 4.3 Controlling Cameras, Text-In Viewer (p. 53) for details about<br />
the text-in viewer window.<br />
37