Chapter 1 - Pacific Communications

User’s Manual
3.2 Setup
Log in to the NVR system. Refer to 2.1 Connecting, Login (p. 9) for details about the login. Go to the
System Menu → Click SiRiS Setup → Run the SiRiS Setup program.
• Service: Allows you to register and manage services and storage. Refer to Service (p. 24) for details.
• Device: Allows you to register and manage sites. Refer to Device (p. 25) for details.
• User: Allows you to register and manage users or user groups. Refer to User (p. 27) for details.
• Recording Schedule: Allows you to set up recording schedules. Refer to Recording Schedule (p. 27)
for details.
• Event Management: Allows you to set up event management schedules. Refer to Event Management
(p. 28) for details.
• (System Setup): Sets up the NVR system. Refer to 2.2 System Setting (p. 10) for details.
NOTE: An alert message is displayed at the bottom of the SiRiS Setup screen in the following cases:
– No storage is allocated to a recording service.
– Storage for recording is full.
Service
The Service menu allows you to register and manage services and storage.
24