Chapter 1 - Pacific Communications

Network Video Recorder
• Time Coverage preset: Select the Always preset.
• Condition preset
− Condition Type: Select Event Condition.
− Select Target to produce event and event type: Select All Devices, Inside 1, and CAM1 in order.
− Event Types: Select Motion Detection.
• Action preset: Select a desired Preset.
• Target preset: Release the Same cameras that triggered an event option → Select CAM1 of the
Inside 1 device and CAM1 of the Inside 2 device from the All Devices list.
OSD Information
The OSD (On Screen Display) is displayed in each camera screen in the Live screen of the SiRiS Client
program.
• Camera Title: Indicates the camera name set in the SiRiS program (upper left
corner of the screen).
• (Listen or Talk): Indicates the Client system can receive audio from or sends
audio to the device (upper right corner of the screen).
• (PTZ): Indicates PTZ control is enabled (upper right corner of the screen).
• (Camera Sequence): Indicates the cameras are being sequenced (upper right
corner of the screen).
• (Red: Is displayed during Time-Lapse Recording or Event-Based Recording), (Orange: Is displayed
during Instant Recording): Indicates video is being recorded in the NVR system (upper right corner of
the screen).
• (Zoom In): Indicates video is zoomed in (upper right corner of the screen).
• Date, Time: Indicates the date or time of the NVR system (bottom of the screen).
• Event Alert: Indicates an event detected (highlights the camera title bar in red).
• Motion Block: Indicates a motion event detected in the boxed area (on image) (supported only for network
video transmitters which use the SiRiS protocol).
Network Disconnection Log
ID Explanation ID Explanation
0 Unknown error. 15 Cannot reach the recording service.
1 Logout. 16 No route is found to the device.
2 All channels of the device are being used. 20 Connection cancelled.
3 Invalid product version. 26 The RTP port is already in use.
4 Invalid user ID or password. 27 SSL connection failed.
10 No device is running. 28 Network connection timeout.
11 Network is down. 29 Host connection timeout.
12 Cannot reach the device’s network. 30 The device does not support RTP over TCP.
13 Connection timeout.
143