Chapter 1 - Pacific Communications
Chapter 1 - Pacific Communications
Chapter 1 - Pacific Communications
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Network Video Recorder<br />
<strong>Chapter</strong> 16 — Controlling With a Network Keyboard<br />
You can control the Client program by using a network keyboard.<br />
NOTE: This function is supported only for a specific model of a network keyboard.<br />
16.1 Registering<br />
1. Register the network keyboard on the administration service: Go to the Start Menu → Click SiRiS →<br />
Run the SiRiS Setup program and enter login information → Select the Device menu→ Click<br />
(Network Keyboard Setup) button, and the Network Keyboard Scan window appears. The way to<br />
register a network keyboard is identical to the way to register a device. Refer to 11.1 Registering<br />
Devices (p. 94) about registering a device.<br />
2. Register the Client system on the network keyboard. Refer to the network keyboard user manual for<br />
details.<br />
• ID (Client system ID): The network keyboard assigns<br />
the ID automatically when the Client system is registered,<br />
and you can change the ID. The ID is used to distinguish<br />
the Client system from other Client systems when<br />
controlling it with a network keyboard, so each must have<br />
a unique ID.<br />
• Name: Set up a Client system name for your reference.<br />
• IP Address: Enter the Client system’s IP address. Do<br />
not check Use DVRNS.<br />
• Control Port: Enter the Control port number set in the<br />
Client System (Check the Control port number in the<br />
System menu → Preference → Network → Network<br />
Keyboard setting).<br />
131