Chapter 1 - Pacific Communications

User’s Manual
− Duration: Enter the duration for the display of
popup video to last.
− Select popup Cameras: Select the cameras
(maximum 4) from which video will pop up.
Selecting the Same cameras that triggered an
event option pops up video only from the camera
where an event is detected (not supported for
alarm-in events and audio detection events).
• Event Acknowledge: Select to display an event log in the SiRiS Client program when an event is
detected based on the event condition setting. Refer to 14.2 Managing Events, Event
Acknowledgement (p. 124).
− Message: Enter the message to be displayed in the SiRiS
Client program.
− Priority: Select the priority of the event. The priority will be
displayed in the event log.
• Move PTZ: Select to move the PTZ camera to a Preset position when an event is detected based on
the event condition setting (supported only for devices which use the SiRiS, Axis, Panasonic WV (DG)
or ONVIF TM Conformance protocol and which supports the PTZ Preset function).
− Select PTZ Camera: Select cameras to
move. This is supported for PTZ cameras
only.
− Selected PTZ Camera: Displays the
selected cameras and allows you to select a
Preset position for the camera to move. Refer
to 4.3 Controlling Cameras, PTZ Control,
PTZ Preset Control (p. 52) about setting
up Preset positions.
• Alarm Out: Select to activate alarm out when an event is detected based on the event condition setting
(supported only for devices which use the SiRiS protocol).
120