Chapter 1 - Pacific Communications

Network Video Recorder
• Device Group: Select to notify events when the
user-defined types of events are detected in the
selected device group.
Click Device Group, and the list of registered
device groups is displayed → Under Device
Group, click a device group to trigger event
notification, and the list of event types is
displayed in Event Types below → Select the
desired event types, and the selected event types
are added along with the selected device group
to the list under Device Group on the right.
3. Set up the event action by double clicking the Action schedule window and selecting a desired action type.
• Email Notification: Select to send an email to Client users when an event is detected based on the
event condition setting.
− Email Subject: Enter the email subject.
− Email Content: Enter the contents of the email. Clicking the
Insert Macro button displays a list of available macros.
Selecting a macro from the list applies the macro when sending
an email.
For this to work properly, you should enter the SMTP server
information for sending email (SiRiS Setup program → Service
menu → (System Setup) button) and enter the email address
of the Client user to be notified. Refer to Chapter 12 — User
Management (p. 111) for details about entering the email
address of the Client user to be notified.
Click the (System Setup) button in the Service menu to enter
the SMTP server information.
− SMTP Server, Port: Enter the email address and port
number of the SMTP server. Select Use SSL/TLS if the
SMTP server requires SSL (Secure Sockets Layer)
authentication.
− Use Authentication: Select and enter the ID and password
if the SMTP server requires user authentication.
− Sender: Enter the sender’s email address.
− Email Test: Click the button to test if the SMTP server
information is correct.
− Notification service connection: Sends an email to the
recipients listed below when any services are disconnected
from the administration service. Clicking the button at
the bottom allows you to enter email addresses for recipients.
• Live Popup: Select to pop up a live video (maximum 36) from the event-detected camera in the Client
system when an event is detected based on the event condition setting. Refer to 14.2 Managing
Events, Live Popup (p. 123).
119