Chapter 1 - Pacific Communications

Network Video Recorder
Chapter 13 — Storage Management
You can mange storage for recording. Run the SiRiS Setup program → Select the Service menu.
NOTES:
• USB hard disks, network hard disks and hard disks set to Dynamic cannot be used as storage.
• When removing a hard disk drive that contains recorded video from the current NVR system and installing
it in another NVR system or a recording server of SiRiS system, you cannot search or play back the video
recorded on the original NVR system or recording server.
• The total amount of storage for one NVR system cannot exceed 50,000 GB (max. 2TB per partition).
• The C:\ drive is not used as storage.
• The NVR system automatically allocates storage for recording to all hard disk drives except the C:\ drive
when system boots.
1. Select a recording service and click the button at the bottom. The Setup – Recording Service window
appears. Select the Device Setup tab.
The list of cameras registered on the
current recording service is displayed.
Clicking the Add button at the bottom
allows you to register other cameras on
the current recording service. Selecting
a device and clicking the Remove button
deletes the device from the current
recording service.
113