Chapter 1 - Pacific Communications
Chapter 1 - Pacific Communications
Chapter 1 - Pacific Communications
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Network Video Recorder<br />
− Bit Rate Limit: Enter the maximum bit rate. You can control the network bandwidth by limiting the<br />
bit rate depending on the network traffic.<br />
Audio<br />
• Source Configuration: Displays the source<br />
configuration information (Configuration: audio<br />
source, Name: source name, Use Count: the<br />
number of profiles that use the source, Source<br />
Token: the number of tokens).<br />
• Encoder Configuration: Set up an encoder.<br />
− Audio Encoder Configuration: Select an<br />
audio encoder from the list of the audio<br />
encoders supported in the device.<br />
− Name: Assign a name to the selected audio<br />
encoder.<br />
− Use Count: Displays the number of profiles<br />
that use the selected audio encoder.<br />
− Encoding: Select an audio compression codec.<br />
− Bit Rate: Select a bit rate.<br />
− Sample Rate: Select the sampling rate. The<br />
higher the value is, the better the sound quality<br />
and the larger the data size.<br />
I/O<br />
• Mode: Set the relay mode for the input and<br />
output devices.<br />
− Monostable: After setting the idle state, the<br />
relay returns to its idle state once the delay<br />
time expires.<br />
− Bistable: After setting the idle state, the relay<br />
remains in this state.<br />
• Delay Time: Set the delay time until the relay returns to its idle state in the Monostable mode.<br />
• Idle State: Set the physical idle state of a relay output.<br />
− Open: Indicates that the relay is open when the relay state is set to Inactive and closed when the state<br />
is set to Active.<br />
− Closed: Indicates that the relay is closed when the relay state is set to Inactive and is open when the state<br />
is set to Active.<br />
• Action: Controls the relay state.<br />
− Active: Clicking the button sets the relay state to Active.<br />
− InActive: Clicking the button sets the relay state to InActive.<br />
109