Chapter 1 - Pacific Communications

User’s Manual
Selecting the registered device group, and then the button at the bottom of the Site panel displays the
Edit Device Group window and allows you to edit the selected device group.
11.2 Managing Devices
Click a device group in the Site panel and then click a device in the Site List panel. Clicking the
at the bottom of the Site List panel, or clicking the right mouse button displays the device menu.
button
OR
• Edit Device: Allows you to change information for connection to the device and each Preset of Recording
Schedule – Action. Refer to Editing Device Information (p. 99) for details.
• Remote Setup Device: Allows you to change the device’s settings remotely. Refer to Changing
Device’s Setting Remotely (p. 102) for details.
• Firmware Upgrade: Allows you to upgrade the device’s software remotely (supported only for devices
which use the SiRiS protocol). Refer to Upgrading Device’s Software (p. 103) for details.
• Remote Desktop: Allows you to connect to the device using the VNC (Virtual Network Computing)
function. For this feature to work, the VNC function must be enabled in the device and a port number
and password for the VNC remote connection must be registered during the device registration at SiRiS
program. Refer to Editing Device Information, Remote Desktop (p. 100) for details about registering
the port number and password for the VNC remote connection at SiRiS program. This function may
not be supported, depending on the specifications and version of the device.
• Multiple Recording Setup: Allows you to set up each Preset of Recording Schedule – Action with the
same values for more than one device. This is supported only for the same type of devices (network
cameras/network video transmitters).
• Update Device Information: Allows you to update the registered device’s information. If the input/
output devices connected to the registered device are not displayed in the list, it is recommended that
you update the registered device’s information. Also, if the Event tab is not displayed during the Edit
Device setting, it is recommended that you update the registered device’s information (only for devices
which do not use the SiRiS protocol and for which event related functions are supported).
• Preview Video: Allows you to preview the device’s video.
• Remove Device: Deletes the device from the administration service.
98