Chapter 1 - Pacific Communications
Chapter 1 - Pacific Communications
Chapter 1 - Pacific Communications
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Network Video Recorder<br />
• Apply to All Devices: Select to apply the same user ID and password to all selected devices if you<br />
selected more than one device and the selected devises have the same user ID and password.<br />
NOTES:<br />
• If the device is a DVR, it might be necessary to enter the DVR port numbers depending on the specifications<br />
and version of the DVR.<br />
• When registering a four-channel network video transmitter which uses the SiRiS protocol, all four<br />
cameras are automatically registered even if some of the four cameras are disabled.<br />
3. Click Device Group in the Site panel, and then the button at the bottom of the Site panel. The Add<br />
Device Group window appears.<br />
• Name: Enter the device group name.<br />
• Location: Select an upper group to which the device group will belong.<br />
• Select Devices Below, Selected Device List: Check the box beside cameras in the left panel, and<br />
the selected cameras are added to the right panel.<br />
Clicking the OK button completes the device group registration.<br />
4. Check that the device was added to the device group correctly. Click Device Group in the Site panel<br />
and then the arrow button ( ) beside Device Group. Clicking the registered group displays the list of<br />
devices added to the device group and connection status in the Site List panel. If the connection was not<br />
made properly, the network disconnection log is displayed (only for devices registered on the recording<br />
service). Refer to Appendix – Network Disconnection Log (p. 143) for details about the network<br />
disconnection log.<br />
97
Change language