PRODUCT GUIDE
PRODUCT GUIDE INSTALLATION SYSTEMS FOR FLOOR COVERINGS Rod Edquist with Colorado Floorworks used UZIN products for this fast track project at University of Colorado Hospital UZIN. YOUR FLOOR. OUR PROMISE.
- Page 2 and 3: 2 Cheryl Acierno, owner of Acierno
- Page 4 and 5: Contents Primers / Moisture Vapor R
- Page 6 and 7: Moisture Mitigation System One Bill
- Page 8 and 9: primers / moisture vapor retarders
- Page 10 and 11: PRIMER / MVR ACCESSORY PRODUCTS UZI
- Page 12 and 13: LEVELING COMPOUNDS / Cement-Based U
- Page 14 and 15: LEVELING COMPOUNDS / GYPSUM-BASED U
- Page 16 and 17: LEVELING ACCESSORY PRODUCTS UZIN RR
- Page 18 and 19: FLOOR COVERING ADHESIVES UZIN WK 22
- Page 20 and 21: WOOD FLOORing ADHESIVES UZIN MK 95
- Page 22 and 23: Tools and Accessories 22
- Page 24 and 25: leveling compound mixing tools UZIN
- Page 26 and 27: leveling compound APPLICATION tools
- Page 28 and 29: Our Responsibility to the Environme
- Page 30 and 31: Contact Information About UFLOOR Sy
- Page 32: UZIN | A Brand of UFLOOR Systems In
<strong>PRODUCT</strong> <strong>GUIDE</strong><br />
INSTALLATION SYSTEMS FOR FLOOR COVERINGS<br />
Rod Edquist with Colorado Floorworks used UZIN products<br />
for this fast track project at University of Colorado Hospital<br />
UZIN. YOUR FLOOR. OUR PROMISE.
2<br />
Cheryl Acierno, owner of Acierno & Company, Denver, CO<br />
needed both a moisture solution and a fast turnaround for<br />
Hodson’s Bar & Grill. UZIN products delivered.
UZIN. Your Floor. Our Promise.<br />
You place your signature on your floors every day.<br />
And it takes a high degree of effort and creativity to<br />
fulfill the vision you’ve laid out for your customers. It<br />
requires attention to detail and an uncompromising<br />
requirement for solutions to issues that your jobsites<br />
demand of you every day. We understand that. And<br />
we promise that we will be there with you, offering you<br />
the highest level of technical support and expertise<br />
along with the highest quality, innovative product<br />
solutions that are effective, safe for the environment<br />
and for you but that also recognize the need to<br />
reduce project costs that improve profitability for your<br />
company. And we back that up with one of the most<br />
comprehensive product system warranties available in<br />
our industry.<br />
With Uzin, you can count on our Promise.<br />
Matthias Liebert<br />
President, UFLOOR Systems Inc.<br />
UZIN. YOUR FLOOR. OUR PROMISE.<br />
3
Contents<br />
Primers / Moisture Vapor Retarders 5<br />
Moisture Vapor Mitigation System 6<br />
Primers / Moisture Vapor Retarders 7<br />
Primer / MVR Accessory Products 10<br />
Leveling Compounds 11<br />
Leveling Compounds / Cement-based 12<br />
Leveling Compounds / Gypsum-based 14<br />
Patch / Repair / Smoothing Compounds 15<br />
Leveling Accessory Products 16<br />
Adhesives 17<br />
Floor Covering Adhesives 18<br />
Wood Flooring Adhesives 19<br />
Adhesive Accessory Products 21<br />
Tools & Accessories 22<br />
Primer / MVR Application Tools 23<br />
Leveling Compound Mixing Tools 24<br />
Leveling Compound Application Tools 26<br />
Adhesive Application Tools 27<br />
Our Responsibility to the Environment 28<br />
Contact Information 30<br />
Alphabetical Listing<br />
Threaded Insert for Tools 26<br />
Trowel Handles 27<br />
Trowel Inserts 27<br />
US Trowel 27<br />
UZIN Clean Box 21<br />
UZIN Drum Kit 24<br />
UZIN Epoxy Accelerator 10<br />
UZIN Epoxy Colorant 10<br />
UZIN Extension Pole 23<br />
UZIN Flat Cage Mixing Paddle 25<br />
UZIN Foam Expansion Strips 16<br />
UZIN Foam Roller 10” 23<br />
UZIN Foam Roller Coarse 27<br />
UZIN Gauge Rake 26<br />
UZIN Leveling Compound Rake 26<br />
UZIN Leveling Pins 16<br />
UZIN Mixing Bucket 24<br />
UZIN Mixing Drum 24<br />
UZIN MK 92 S 20<br />
UZIN MK 95 20<br />
UZIN MK 200 19<br />
UZIN NC 110 14<br />
UZIN NC 150 13<br />
UZIN NC 157 13<br />
UZIN NC 170 LevelStar 12<br />
UZIN NC 172 BiTurbo 12<br />
UZIN NC 182 15<br />
UZIN NC 888 15<br />
UZIN Nylon Fiber Roller 10” 23<br />
UZIN Oval Mixing Paddle 25<br />
UZIN PE 260 9<br />
UZIN PE 280 8<br />
UZIN PE 414 Turbo 8<br />
UZIN PE 480 7<br />
UZIN Roller Frame 10” 23<br />
UZIN RR 201 16<br />
UZIN RR 203 16<br />
UZIN Smoother 26<br />
UZIN Spike Roller 26<br />
UZIN Spiral Mixer 25<br />
UZIN Water Bucket 24<br />
UZIN WK 222 18<br />
4
Primers / Moisture Vapor Retarders<br />
5
Moisture Mitigation System<br />
One Billion DOLLARS<br />
That‘s the estimated cost that the flooring<br />
industry pays every year for moisture and pH<br />
related flooring failures. At UZIN, we would like<br />
to be a partner with you in helping to reduce that<br />
dollar amount. Our Moisture Mitigation System<br />
offers you not only peace of mind,<br />
but also a lifetime warranty against<br />
moisture vapor related failures<br />
when properly installed.* Look for<br />
this UZIN Moisture Mitigation<br />
System icon next to these<br />
innovative products:<br />
• UZIN PE 480 Moisture Vapor Retarder<br />
• UZIN PE 280 Super-Fast Primer<br />
• UZIN NC 170 Leveling Compound<br />
You can find the UZIN Moisture<br />
Mitigation System Specification<br />
on our website or you can scan<br />
this QR Code for instant access.<br />
www.uzin.us<br />
Moisture Mitigation System<br />
Project: University of Colorado Hospital Expansion<br />
*Subject to certain requirements.<br />
6
primers / moisture vapor retarders<br />
UZIN PE 480<br />
Moisture Vapor Retarder / Primer<br />
Use on<br />
Green Slabs<br />
2-component 100% solids epoxy resin moisture vapor retarder for concrete substrates. With no limit<br />
on moisture, UZIN PE 480 can be used over ‘green’ concrete (3 days old). It can also be used as a<br />
surface hardener for absorbent substrates.<br />
Suitable for/on/as:<br />
• A moisture vapor retarder on concrete substrates such as scarified, very dense or smooth concrete,<br />
without limitation to a maximum residual moisture value<br />
• A surface hardening primer on absorbent substrates, such as gypsum products and concrete<br />
• A bonding agent on abraded ceramic tile, stone and terrazzo, existing substrates with well-bonded<br />
adhesive residues, smoothing compounds and coatings including water-soluble adhesive residues<br />
• Radiant floor heating systems<br />
Properties:<br />
• No limit on subfloor moisture vapor - use over 3 day old ‘green’ concrete<br />
• One or two coat application - when applied as a moisture vapor retarder<br />
• Excellent covering capacity - insures properly coated surface<br />
• Chemical resistant - resistant to contamination from other products<br />
• Versatile - apply by squeegee, trowel or roller<br />
• Water and solvent free<br />
LEED<br />
contributing<br />
product<br />
Moisture Mitigation System<br />
®<br />
Note: See product data sheet for PE 480 for additional product information and detailed application instructions.<br />
Item # Package Size Color Coverage VOC Dry Time<br />
64554 2.5 gal. (9.63 kg) Amber 200-500 sq. ft./pail<br />
Does not exceed Foot traffic: 12-24 hrs.<br />
metal combi-can<br />
(each coat)<br />
10 grams/liter<br />
Final strength: 3-5 days<br />
University of Colorado Hospital Expansion<br />
Anschutz Medical Campus, Aurora, Colorado<br />
Products: UZIN PE 480, UZIN PE 280, UZIN NC 170<br />
Contractor: Colorado Floorworks<br />
UZIN. YOUR FLOOR. OUR PROMISE.<br />
7
primers / moisture vapor retarders<br />
UZIN PE 414 Turbo<br />
Primer / Moisture Vapor Retarder<br />
Fast<br />
Drying<br />
1-component surface strengthening primer and moisture vapor retarder. Fast drying polyurethane<br />
primer for use prior to the application of UZIN leveling compounds. Acts as a surface strengthener<br />
and primer coat on absorbent and non-absorbent surfaces.<br />
Suitable for/on/as:<br />
• A substrate surface strengthener prior to the application of UZIN cement-based patching<br />
and leveling products<br />
• Priming over gypsum concrete, concrete, plywood, OSB, well-bonded adhesive residues<br />
including water-soluble adhesives, and non-porous surfaces<br />
• A moisture vapor retarder on existing concrete up to 90% RH and 7 lb. MVER<br />
• Difficult substrates to improve the bond of UZIN wood flooring adhesives such as<br />
UZIN MK 92 S, UZIN MK 95 and UZIN MK 200<br />
• Radiant floor heating systems (priming only, not for moisture mitigation)<br />
Properties:<br />
• Fast drying - quicker installations<br />
• Ready to use - no mixing required<br />
• Low viscosity - excellent surface penetration<br />
• Water and solvent free - Emicode EC 1 R Plus (very low emission)<br />
®<br />
LEED<br />
contributing<br />
product<br />
Note: See product data sheet for PE 414 for additional product information and detailed application instructions.<br />
Item # Package Size Color Coverage VOC Dry Time<br />
41364 2.6 gallon<br />
plastic pail<br />
Brown 1,200-1,500 sq. ft./pail Does not exceed<br />
15 grams/liter<br />
Absorbent: 40-90 min.<br />
Dense: 60-150 min.<br />
UZIN PE 280<br />
Super-Fast Primer<br />
Very<br />
Fast Drying<br />
1-component dispersion primer with carbon fiber technology for smooth and dense surfaces.<br />
Produces a rough, well-keyed surface and provides ideal adhesion over various substrates.<br />
Suitable for/on:<br />
• Existing surfaces in need of refurbishment, such as well-bonded, non-water-soluble adhesive<br />
residues including cutback adhesive and as a primer prior to application of UZIN leveling compounds<br />
• Dense and smooth surfaces, on soundly bonded ceramic and natural stone tiles,<br />
terrazzo, water-resistant coatings, epoxy coatings or metal surfaces<br />
• UZIN epoxy and polyurethane primers<br />
• Radiant floor heating systems<br />
Properties:<br />
• Very fast drying - quicker installations<br />
• Ready to use - stir before application<br />
• Superior bonding - use over UZIN epoxy or polyurethane primers<br />
• Solvent free - Emicode EC 1 Plus (very low emission)<br />
®<br />
LEED<br />
contributing<br />
product<br />
Moisture Mitigation System<br />
Note: See product data sheet for PE 280 for additional product information and detailed application instructions.<br />
Item # Package Size Color Coverage VOC Dry Time<br />
47522<br />
1.1 gal. plastic pail Yellowish<br />
510-780 sq. ft./1.1 gal. Does not exceed Approx. 45 min.<br />
47523<br />
2.6 gal. plastic pail<br />
1,200-1,850 sq. ft./2.6 gal 20 grams/liter<br />
8
primers / moisture vapor retarders<br />
UZIN PE 260<br />
Substrate Primer<br />
Super<br />
Bonding<br />
Agent<br />
1-component dispersion primer for use over absorbent and non-absorbent surfaces prior<br />
to the application of UZIN leveling compounds.<br />
Suitable for/on:<br />
• Existing surfaces requiring refurbishment, such as well-bonded, non-water-soluble adhesive<br />
residues and leveling compounds<br />
• Soundly attached plywood, OSB or other suitable wood substrates<br />
• Thin well-bonded cutback adhesive residues<br />
• Radiant floor heating systems<br />
Properties:<br />
• Ready to use - can be used undiluted or diluted depending on substrate condition<br />
• Highly concentrated - can be diluted for porous substrates<br />
• High solids content - superior bonding on most substrates<br />
• Solvent free - Emicode EC 1 Plus (very low emission)<br />
®<br />
LEED<br />
contributing<br />
product<br />
Note: See product data sheet for PE 260 for additional product information and detailed application instructions.<br />
Item # Package Size Color Coverage VOC Dry Time<br />
6367 2.6 gallon<br />
Light blue 800-1,200 sq. ft./pail Does not exceed Approx. 1-4 hrs.<br />
plastic pail<br />
20 grams/liter<br />
Mid-Atlantic Floors in Sterling, VA incorporated six different UZIN<br />
system products in Gensler Architects’ new Washington, D.C.<br />
offices, including UZIN NC 170 Self Leveling Compound.<br />
UZIN. YOUR FLOOR. OUR PROMISE.<br />
9
PRIMER / MVR ACCESSORY <strong>PRODUCT</strong>S<br />
UZIN Epoxy Colorant<br />
Red, liquid color concentrate for adding color to any UZIN 2-component epoxy resin MVR.<br />
Adds color contrast to visually insure 2nd coat coverage.<br />
Suitable with:<br />
Properties:<br />
• UZIN 2-component epoxy resin MVR’s<br />
• High color intensity<br />
Note: See product data sheet for Epoxy Colorant for additional product information and detailed application instructions.<br />
Item # Package Size Mixing Ratio Color<br />
9344 1 liter plastic bottle 3.5 ozs./2.5 gal. of MVR Red<br />
UZIN Epoxy Accelerator<br />
Epoxy accelerator for rapid curing for any UZIN 2-component epoxy resin MVR.<br />
Allows for fast track floor covering installation.<br />
Suitable with:<br />
Properties:<br />
• UZIN 2-component epoxy resin MVR’s<br />
• Accelerates the setting process<br />
Note: See product data sheet for Epoxy Accelerator for additional product information and detailed application instructions.<br />
Item # Package Size Mixing Ratio Color<br />
33155 4 - 7oz. (.2 kg)<br />
2 btls./2.5 gal. of MVR Brownish /transparent<br />
plastic btls./unit<br />
TIPS<br />
of the<br />
TRADE<br />
UZIN Substrate Preparation Guide<br />
Substrate preparation is a vital part of the success of<br />
any floorcovering installation. Regardless of the substrate<br />
composition, it’s the foundation which serves as the<br />
platform for the installation of any floorcovering. The UZIN<br />
Substrate Preparation Guide is intended to communicate<br />
jobsite qualification requirements, common industry<br />
surface preparation methods and equipment, and<br />
methods to avoid in order to produce the best possible<br />
substrate ready for the application of Uzin products. It<br />
also communicates appropriate Uzin product options<br />
and systems to meet floorcovering<br />
manufacturer specifications. You can<br />
find the Substrate Preparation Guide<br />
on our website at www.uzin.us or scan<br />
this QR Code for instant access to the<br />
guide.<br />
10
Leveling Compounds<br />
11
LEVELING COMPOUNDS / Cement-Based<br />
UZIN NC 172 BiTurbo<br />
Premium Plus Self Leveling Compound<br />
Fastest<br />
Drying<br />
Leveling<br />
Compound<br />
Exceptionally fast drying, cement-based leveling and smoothing compound. Provides an extremely<br />
hard finish without depth limitations. Level Plus Effect technology produces flat, absorbent substrates<br />
for carpet and resilient floor coverings of all types. May also be used as a concrete topping with a<br />
minimum 1/4” even in industrial applications subject to rolling loads.<br />
Suitable for/on:<br />
• All types of floor covering<br />
• Wood flooring using any UZIN wood floor adhesive, cork and PVC (12 hour dry time)<br />
• Residential, commercial and heavy duty industrial applications<br />
• Existing substrates, including thin and dense non-water-soluble adhesive residues<br />
on concrete including cutback adhesive residues (subject to primer application)<br />
• Fast track construction projects<br />
• Radiant floor heating systems<br />
Properties:<br />
• Ready for covering in as little as 1 hour<br />
• Very smooth surface - increased adhesive coverage rate<br />
• Exceptional flow properties<br />
• Pumpable<br />
• Very low emission - Emicode EC 1 R Plus<br />
Note: See product data sheet for NC 172 for additional product information and detailed application instructions.<br />
®<br />
LEED<br />
contributing<br />
product<br />
Item # Package Size Color Coverage Dry Time<br />
55837 55 lb. paper bag Dark Grey 32 sq. ft./55 lb. bag<br />
@ 1/4“ depth<br />
Approx. 1 hr./Foot traffic<br />
Approx. 1 hr./Ready for covering<br />
UZIN NC 170 LevelStar<br />
Premium Self Leveling Compound<br />
No Depth<br />
Limitation<br />
Premium low-stress, cement-based leveling and smoothing compound. Provides an extremely<br />
hard, smooth finish without depth limitations. Level Plus Effect technology produces flat,<br />
absorbent substrates for carpet and resilient floor coverings of all types. May be used as a<br />
topping provided a suitable wear surface sealer or coating is applied.<br />
Suitable for/on/as:<br />
• All types of floor coverings<br />
• A smoothing layer over structurally sound concrete above, on or below grade, in new construction<br />
or renovation projects. May be used over cast in place or precast concrete<br />
• A smoothing layer over existing hard surface flooring (stone, ceramics, and epoxy coatings)<br />
• New, structurally sound OSB or equally rated subfloor materials with UZIN RR201 mesh<br />
• Existing substrates, including thin and dense non-water-soluble adhesive residues on concrete including<br />
cutback adhesive residues (subject to primer application)<br />
• High stress loads in residential, commercial and industrial locations<br />
• Radiant floor heating systems (hydronic or electric)<br />
Properties:<br />
• No depth limitation - versatile<br />
• Fast setting - accelerates floor covering installation<br />
• Shear resistant under wood flooring - suitable for all glue down wood applications<br />
• Very low emission - Emicode EC 1 R Plus<br />
Note: See product data sheet for NC 170 for additional product information and detailed application instructions.<br />
Moisture Mitigation System<br />
®<br />
LEED<br />
contributing<br />
product<br />
Item # Package Size Color Coverage Dry Time<br />
72691 50 lb. paper bag Grey 30 sq. ft./50 lb. bag<br />
@ 1/4” depth<br />
Approx. 2 hrs./Foot traffic<br />
Approx. 15 hrs./Ready for covering<br />
12
LEVELING COMPOUNDS / Cement-Based<br />
UZIN NC 150<br />
Project Plus Self Leveling Compound<br />
Smooth<br />
Surface<br />
Finish<br />
Cement-based leveling and smoothing compound for depths up to 1”. Works well for producing level,<br />
flat surfaces with high absorbency for standard preparation and cost effective applications in areas with<br />
normal wear demands.<br />
Suitable for/on:<br />
• Producing level, flat, smooth substrates with high absorbency, for the application of carpet and<br />
all types of resilient floor covering<br />
• Producing flat surfaces for installing ceramic tile and natural stone<br />
• Existing substrates with well-bonded, non-water-soluble residues of adhesives including cutback adhesive<br />
and leveling compounds (subject to primer application)<br />
• Efficient and economical standard leveling work for residential and commercial projects with normal wear requirements<br />
• Radiant floor heating systems<br />
Properties:<br />
• For depths up to 1”<br />
• Quick drying<br />
• Low stress - ability to cover difficult substrates<br />
• High compressive and tensile strength<br />
• Very low emission - Emicode EC 1 R Plus<br />
®<br />
LEED<br />
contributing<br />
product<br />
Note: See product data sheet for NC 150 for additional product information and detailed application instructions.<br />
Item # Package Size Color Coverage Dry Time<br />
72690 50 lb. paper bag Light Grey 29 sq. ft./50 lb. bag<br />
@ 1/4“ depth<br />
Approx. 2-3 hrs./Foot traffic<br />
Approx. 24 hrs./Ready for covering<br />
UZIN NC 157<br />
Project Self Leveling Compound<br />
Economical<br />
Surface<br />
Preparation<br />
Self-drying leveling compound for economical surface preparation for depths up to 2”.<br />
Suitable for/on/as:<br />
• Producing level, absorbent, flat and smooth surfaces, on or below grade, prior to the installation of<br />
most floor coverings<br />
• A self-leveling layer over existing hard surface flooring such as well-bonded terrazzo, ceramic tile,<br />
stone and well-bonded epoxy coatings<br />
• Existing substrates, including thin and dense non-water-soluble adhesive residues on concrete,<br />
including cutback adhesive residues (subject to primer application)<br />
• Efficient and economical standard leveling work for residential and commercial projects with<br />
normal wear requirements<br />
• Preventing the growth of mold or mildew<br />
Properties:<br />
• For depths up to 2”<br />
• Smooth surface<br />
• Good strength - high absorbency<br />
• Very low emission - Emicode EC 1 R Plus<br />
®<br />
LEED<br />
contributing<br />
product<br />
Note: See product data sheet for NC 157 for additional product information and detailed application instructions.<br />
Item # Package Size Color Coverage Dry Time<br />
72536 50 lb. paper bag Grey 27 sq. ft./50 lb. bag<br />
@ 1/4“ depth<br />
Approx. 2-4 hrs./Foot traffic<br />
Approx. 24-36 hrs./Ready for covering<br />
13
LEVELING COMPOUNDS / GYPSUM-BASED<br />
UZIN NC 110<br />
Premium Self Leveling Compound<br />
Great for<br />
Difficult<br />
Substrates<br />
Gypsum-based leveling and smoothing compound. Provides an extremely smooth finish without<br />
depth limitation. Level Plus Effect technology produces flat, absorbent substrates for all types of<br />
floor covering. Particularly suitable for the renovation of old and multiple substrates.<br />
Suitable for/on:<br />
• All types of floor covering<br />
• Installation of engineered wood flooring with UZIN wood floor adhesives<br />
• Gypsum concrete, plywood and OSB substrates<br />
• Old gypsum concrete or concrete subfloors with existing ceramic tile, stone and terrazzo<br />
• Existing plywood, OSB and concrete substrates with well-bonded, non-water-soluble<br />
and cutback adhesive residues and leveling compound residues (subject to primer application)<br />
• Residential and commercial use<br />
• Radiant floor heating systems<br />
Properties:<br />
• Virtually stress-free drying and curing properties - great for difficult substrates<br />
• Fast setting - improves job productivity<br />
• Pumpable - minimizes time and effort<br />
• Very smooth surface - increased adhesive coverage rate<br />
• Very low emission - Emicode EC 1 Plus<br />
Note: See product data sheet for NC 110 for additional product information and detailed application instructions.<br />
Level Plus<br />
Effect<br />
®<br />
LEED<br />
contributing<br />
product<br />
Item # Package Size Color Coverage Dry Time<br />
1272 55 lb. paper bag Light grey/white 32 sq. ft./55 lb. bag<br />
@ 1/4“ depth<br />
Approx. 2 hrs./Foot traffic<br />
Approx. 24 hrs./Ready for covering<br />
Nick Lauranzon, Installation Manager with Hodgman’s Inc.<br />
in Richmond, VA just needed smoothing and patching with<br />
UZIN NC 888 for this project at St. Mary’s Hospital in Richmond<br />
14<br />
UZIN. YOUR FLOOR. OUR PROMISE.
PATCH / REPAIR / SMOOTHING COMPOUNDS<br />
UZIN NC 182<br />
Low Slump Patching and Repair Compound<br />
Deep Fill,<br />
Ramp &<br />
Skim<br />
Fast setting, low slump patching and repair compound for any depth. A cement-based material<br />
suitable for filling holes, cracks and making general surface repairs to concrete substrates.<br />
Suitable for/on/as:<br />
• Producing level, absorbent, flat and smooth surfaces for virtually all floor coverings<br />
• A smoothing layer over structurally sound solid concrete on new construction or renovation projects<br />
• A smoothing layer over existing hard surface flooring (stone, ceramics and epoxy coatings)<br />
• New, sound OSB underlayment or equally rated subfloor materials<br />
• Existing concrete substrates with thin and dense non-water-soluble adhesive residues<br />
• High stress loads in residential, commercial and industrial locations<br />
• Radiant floor heating systems<br />
Properties:<br />
• No depth limitation<br />
• No primer needed up to 1/8” depth - fast application<br />
• Fast setting, very smooth surface - accelerates floor covering installation<br />
• Versatile - great for forming ramps, deep filling and skim coating<br />
• Exceptionally fine aggregates<br />
• Very low emission - Emicode EC 1 R Plus<br />
Note: See product data sheet for NC 182 for additional product information and detailed application instructions.<br />
®<br />
LEED<br />
contributing<br />
product<br />
Item # Package Size Color Coverage Dry Time<br />
72991<br />
37259<br />
10 lb. paper bag<br />
27.5 lb. paper bag<br />
Grey<br />
20 sq. ft./10 lb. bag @ 1/8“ depth<br />
55 sq. ft./27.5 lb. bag @ 1/8“ depth<br />
1 hr./
LEVELING ACCESSORY <strong>PRODUCT</strong>S<br />
UZIN RR 201<br />
Substrate Reinforcing Mesh<br />
Fiberglass reinforcing mesh with extremely high tensile strength and a tremendous<br />
reinforcing effect when used with UZIN primers and leveling compounds.<br />
Suitable for/on:<br />
Properties:<br />
• Old substrates with bonded leveling compound and adhesive layers • High elasticity<br />
• Various substrates including rough concrete, hardwood, OSB, • Extreme tensile strength<br />
backer board, stone and ceramic<br />
• Strong composite system<br />
• Surfaces exposed to heavy wear<br />
• No hazardous materials<br />
Note: See product data sheet for RR 201 for additional product information and detailed application instructions.<br />
Item # Package Size Color Length/Width<br />
52154 1 roll/ctn. White 246 lineal feet x 36“<br />
UZIN RR 203<br />
Substrate Crack Bridging Material<br />
Fiberglass crack reinforcement strands used for bridging substrate cracks and joints up to<br />
1/4” wide and with 3/16” maximum movement.<br />
Suitable for/on:<br />
Properties:<br />
• Control joints and trenches in concrete<br />
• High elasticity<br />
• Joints in plywood and between different substrate types<br />
• Extreme tensile strength<br />
• Wood plank substrates and OSB<br />
• Strong composite system<br />
• Existing substrates subject to slight vibration<br />
• No hazardous materials<br />
• Use with UZIN patching and smoothing compounds<br />
Note: See product data sheet for RR 203 for additional product information and detailed application instructions.<br />
Item # Package Size Color Length/Width<br />
52155 1 roll/ctn. White 82 lineal feet x 39.5“<br />
UZIN Leveling Pins<br />
Plastic, self-adhesive height measurement pins for use when pouring leveling compounds.<br />
Suitable for:<br />
Properties:<br />
• The correct measurement of leveling compound pours up to 4” • High adhesive strength<br />
• High visibility neon green<br />
Item # Package Size Shipping Unit Color<br />
61834 1 pkg./21 pcs. 1 ctn./5 pkgs. Green<br />
UZIN Foam Expansion Strips<br />
Self-adhesive polyethelene expansion strips used when pouring leveling compounds.<br />
Suitable for:<br />
Properties:<br />
• Mechanical separation between floor and wall, installed<br />
• High adhesive strength<br />
prior to the application of leveling compounds<br />
• 2” high x 3/16” wide<br />
Item # Package Size Shipping Unit Color<br />
10122 1 roll 10 rolls/ctn. White<br />
16
Adhesives<br />
17
FLOOR COVERING ADHESIVES<br />
UZIN WK 222<br />
Solvent-Free Contact Adhesive<br />
Solvent Free,<br />
Low Odor<br />
Premium solvent-free, water-based contact adhesive. Easily applied with brush or roller, the short<br />
open time produces a powerful bond, immediately upon contact. The non-flammable, low-VOC<br />
and low odor content makes it ideal for occupied buildings.<br />
Suitable for/on:<br />
• Vinyl and rubber wall base, stair treads, transition profiles, flash coving sheet vinyl, linoleum and rubber<br />
• All textile floor coverings or woven carpets. For contact bonding square nose or bullnose stairs including<br />
upholstered treads and risers<br />
• Contact bonding sheet vinyl, cushion vinyl floor coverings, linoleum and rubber on staircases<br />
• All types of constructional contact bonding<br />
• Heavy duty use in residential, commercial, industrial and sports facility applications<br />
• Wet shampooing and spray extraction cleaning<br />
Properties:<br />
• Powerful bond strength - great for difficult to bond products<br />
• Superb rolling and brushing properties - easy to apply<br />
• High coverage with supplied roller - low cost per sq. ft.<br />
• Can be applied one day in advance - long contact bonding time<br />
• Solvent free, meets Emicode EC 1 Plus requirements - promotes healthy indoor air quality<br />
®<br />
LEED<br />
contributing<br />
product<br />
Note: See product data sheet for WK 222 for additional product in formation and detailed application instructions.<br />
Item # Package Size Color Coverage Open Time<br />
61970<br />
.95 qt. plastic pail Beige<br />
24-36 sq. ft./pail<br />
Approx. 20-40 mins.<br />
61981<br />
1.44 gal. plastic pail<br />
144-216 sq. ft./pail<br />
UZIN WK 222 in practice<br />
UZIN WK 222 is a solvent-free, water-based contact adhesive<br />
ideal for use where the demands on healthy indoor climates<br />
must be observed. Easily applied with brush or roller, UZIN<br />
WK 222 enables the fast installation of a wide variety of floor<br />
coverings and transition profiles. All textile coverings, even<br />
cumbersome needle punch or woven carpet, can be applied<br />
with both speed and ease.<br />
18
WOOD FLOORing ADHESIVES<br />
UZIN MK 200<br />
STP Wood Flooring Adhesive<br />
Will Not<br />
Etch Finish<br />
1-component, solvent and water-free, moisture cured STP (Silane Terminated Prepolymer)<br />
hybrid adhesive that combines the powerful flexibility of a polyurethane with the advantages<br />
of modern silane technology.<br />
Suitable for/on:<br />
• Prefinished and unfinished engineered wood flooring<br />
• Solid tongue and groove strip and plank<br />
• Exotic species, smoked oak<br />
• Wood flooring on most subfloors with adequate strength such as concrete, fortified gypsum concrete,<br />
plywood and OSB<br />
• Wood flooring on radiant heat systems<br />
Properties:<br />
• 1-component - no mixing required<br />
• Universal range of uses - solids, engineered, unfinished and factory finished<br />
• Excellent ridge formation and stability - promotes proper adhesive transfer and board positioning<br />
• Fast, high suction grab - aggressive, wet lay wood floor installation<br />
• Easy to apply - effortless troweling<br />
• Easy adhesive removal - will not bond to or etch finish<br />
• Water and solvent-free - Emicode EC 1 R Plus (very low emission)<br />
Note: See product data sheet for MK 200 for additional product information and detailed application instructions.<br />
Item # Package Size Color Coverage VOC Dry Time<br />
60806 2.6 gal. metal Beige<br />
65 sq. ft./gal. Does not exceed Approx. 24 hrs./Load bearing<br />
pail<br />
170 sq. ft./pail 40 grams/liter<br />
Approx. 48 hrs./Sanding<br />
UZIN MK 200 in practice<br />
The new STP technology of UZIN MK 200 combines the powerful flexibility of a 1-component polyurethane adhesive with the<br />
benefits of modern silane technology.<br />
19
WOOD FLOORing ADHESIVES<br />
UZIN MK 95<br />
Wood Flooring Adhesive<br />
Fast Setting<br />
Rapid Grab<br />
1-component, polyurethane, rapid-setting adhesive with firm ridging and superior green grab,<br />
making it suitable for the installation of all types of wood flooring. Solvent and water-free, it<br />
eliminates any swelling effect on moisture sensitive wood flooring species.<br />
Suitable for/on:<br />
• Solid strip and plank flooring, prefinished and unfinished, residential or commercial<br />
• Engineered wood flooring of all types, prefinished and unfinished, parquet, mosaics and mixed media<br />
• Sound wood, concrete and gypsum concrete substrates including radiant heat floor systems<br />
Properties:<br />
• 1-component - no mixing required<br />
• Universal range of uses<br />
• Rapid setting with superior green grab - fast and secure installations<br />
• Easy to apply - effortless troweling<br />
• Easy adhesive removal - remove adhesive residue from prefinished surfaces up to 24 hours after installation<br />
• Water and solvent-free - Emicode EC 1 R Plus (very low emission)<br />
Note: See product data sheet for MK 95 for additional product information and detailed application instructions.<br />
Item # Package Size Color Coverage VOC Dry Time<br />
44111 2.6 gal. metal Beige<br />
65 sq. ft./gal. Does not exceed Approx. 24 hrs./Load bearing<br />
pail<br />
170 sq. ft./pail 10 grams/liter<br />
Approx. 24 hrs./Sanding<br />
UZIN MK 92 S<br />
Wood Flooring Adhesive<br />
Sand &<br />
Finish in<br />
8 Hours!<br />
2-component polyurethane adhesive with high shear strength suited for all types and widths<br />
of wood flooring especially plank installations 12” and wider. Extremely fast-setting with an<br />
average working time of 30 minutes. It is very effective for setting starter rows and can usually<br />
be strapped in 2 to 3 hours.<br />
Suitable for/on:<br />
• All types and species of prefinished and unfinished solid and engineered wood flooring<br />
• Beech, maple, exotics and laminate flooring<br />
• Sound substrates including plywood, OSB, concrete and gypsum concrete including radiant heat floor systems<br />
Properties:<br />
• Fast track installations - sand and finish in 8 hours<br />
• Excellent ridge formation - promotes superior contact with boards and substrate<br />
• Very fast setting with superior green grab - great for starter rows<br />
• Versatile adhesive - works well with solid or engineered wood<br />
• High solids, shrink-free formula - holds position through seasonal movement<br />
• Water and solvent-free - Emicode EC 1 R Plus (very low emission)<br />
Note: See product data sheet for MK 92 S for additional product information and detailed application instructions.<br />
Item # Package Size Color Coverage VOC Dry Time<br />
59640 1.8 gal. plastic Beige<br />
65 sq. ft./gal. Does not exceed Approx. 2-4 hrs./Load bearing<br />
pail and bottle<br />
117 sq. ft./pail 9 grams/liter<br />
Approx. 8 hrs./Sanding<br />
20
ADHESIVE ACCESSORY <strong>PRODUCT</strong>S<br />
UZIN Clean Box<br />
Effective<br />
Adhesive<br />
Removal<br />
Highly effective cleaning cloths for removing adhesive residues from surfaces, hands and tools.<br />
Suitable for:<br />
• Removing fresh or dried 1-component polyurethane and silane adhesive residues<br />
• Removing fresh and slightly cured 2-component polyurethane and epoxy resin adhesive residues<br />
Properties:<br />
• Dries quickly without leaving residue<br />
• Multipurpose use - floor surfaces, hands and tools<br />
• Effective cleaning - gentle on skin<br />
• Fresh citrus scent<br />
Note: See product data sheet for UZIN Clean Box for additional product information and detailed use instructions.<br />
Item # Package Size Shipping unit Color<br />
38465 Plastic drum/72 cloths 6 drums/ctn Green<br />
Terry Bastian, owner of Bastian’s Carpet One in Allentown, PA<br />
used the UZIN Moisture Mitigation System on the Phoenixville<br />
Public Library to meet his requirement.<br />
UZIN. YOUR FLOOR. OUR PROMISE.<br />
21
Tools and Accessories<br />
22
primer / MVR application tools<br />
UZIN Foam Roller 10”<br />
The UZIN Foam Roller 10” is designed for the application of all UZIN polyurethane and dispersion-based primers.<br />
Suitable for:<br />
Properties:<br />
• Use with UZIN polyurethane and dispersion-based primers<br />
• Distributes product evenly<br />
to floor surface<br />
Item # Package Size Shipping Unit Color<br />
9194 10/pkg. 1 pkg. White<br />
UZIN Nylon Fiber Roller 10”<br />
The UZIN Nylon Fiber Roller 10” is designed for the application of all UZIN 2-component epoxy resin MVR’s.<br />
Suitable for:<br />
Properties:<br />
• Use with UZIN 2-component epoxy resin MVR’s<br />
• Distributes product evenly<br />
to floor surface<br />
Item # Package Size Shipping Unit Color<br />
9394 10/pkg. 1 pkg. White<br />
UZIN Roller Frame 10”<br />
The Roller Frame 10” is designed to hold UZIN 10” roller covers used in the application of<br />
UZIN epoxy resin MVR’s, polyurethane and dispersion-based primers.<br />
Suitable for:<br />
Properties:<br />
• Use with #9194, #9394 and #61983 UZIN 10” roller covers<br />
• Heavy duty steel bayonet style frame<br />
Item # Package Size Shipping Unit Color<br />
12494 1 each 1 each Red (handle)<br />
UZIN Extension Pole<br />
Suitable for:<br />
Properties:<br />
• Use with UZIN Roller Frame, Leveling Compound Rake,<br />
• 2-piece, heavy duty aluminum construction<br />
Gauge Rake, Spike Roller and Smoother • Extends from 47” to 82”<br />
• Friction fit knuckle<br />
Item # Package Size Shipping Unit Color<br />
12503 1 each 1 each Green (handle)<br />
23
leveling compound mixing tools<br />
UZIN Drum Kit<br />
The Drum Kit contains: UZIN Mixing Drum 16 gal., Gauge Rake, Smoother, Oval Mixing Paddle,<br />
Water Buckets 2.4 gal. (2), Pole.<br />
Suitable for:<br />
Properties:<br />
• Mixing, pouring and applying up to 2 bags of UZIN<br />
• Heavy duty mixing drum<br />
leveling compounds<br />
• 2 bag mixing capacity<br />
• Quality application tools<br />
Item # Package Size Shipping Unit Weight<br />
59973 1 each 1 each 19 lbs.<br />
UZIN Mixing Drum<br />
The UZIN 16 gallon Mixing Drum has a 2 bag capacity and is made of heavy duty<br />
HDPE (High Density Polyethylene) plastic.<br />
Suitable for:<br />
Properties:<br />
• Mixing, pouring and applying up to 2 bags of UZIN<br />
• High impact HDPE plastic<br />
leveling compounds<br />
• Tough, durable<br />
• Comes with lid<br />
Item # Package Size Shipping Unit Weight<br />
59267 1 each 1 each 12 lbs.<br />
UZIN Mixing Bucket<br />
8 gallon heavy duty plastic bucket with handle grips for mixing UZIN liquid and powder products.<br />
Suitable for:<br />
Properties:<br />
• Mixing UZIN powder products<br />
• Heavy-duty<br />
• Mixing UZIN 2-component epoxy resin MVR’s<br />
• 1 bag capacity<br />
Item # Package Size Shipping Unit Weight<br />
9191 1 each 1 each 4 lbs.<br />
UZIN Water Bucket<br />
2.4 gallon transparent plastic bucket with printed liter scale for measuring the correct<br />
water quantity for UZIN powder products.<br />
Suitable for:<br />
Properties:<br />
• Measurement of correct water quantity when mixing<br />
• Tough construction<br />
UZIN powder products<br />
• Transparent<br />
• Liter scale<br />
Item # Package Size Shipping Unit Weight<br />
10412 1 each 1 each 1 lb.<br />
24
leveling compound mixing tools<br />
UZIN Flat Cage Mixing Paddle<br />
Mixing paddle designed for blending UZIN leveling compounds especially for use with the<br />
UZIN 8 gallon plastic bucket.<br />
Suitable for:<br />
Properties:<br />
• Mixing UZIN leveling compounds and patches<br />
• Fast and homogeneous mixing<br />
• Use with flat-bottom buckets<br />
• Allows effective mixing into bucket corners<br />
• 1/2” min. drill chucks<br />
• Heavy duty steel<br />
Item # Package Size Shipping Unit Weight<br />
13606 1 each 1 each 2 lbs.<br />
UZIN Oval Mixing Paddle<br />
Mixer for blending UZIN leveling compounds. It’s oval shape is most effective<br />
when used with the UZIN Mixing Drum.<br />
Suitable for:<br />
Properties:<br />
• Mixing UZIN leveling compounds<br />
• Fast and homogeneous mixing<br />
• Use with UZIN Mixing Drum<br />
• 1/2” min. drill chucks<br />
Item # Package Size Shipping Unit Weight<br />
59597 1 each 1 each 2 lbs.<br />
UZIN Spiral Mixer<br />
Mixing paddle especially designed for blending 2-component epoxy resin MVR’s and adhesives.<br />
Suitable for:<br />
Properties:<br />
• Mixing UZIN 2-component epoxy resin MVR’s<br />
• Spiral design pulls material from sidewalls<br />
• Mixing UZIN 2-component adhesives<br />
for complete mixing<br />
• 1/2” min. drill chucks<br />
• Helps push material down and together<br />
for effective blending<br />
Item # Package Size Shipping Unit Weight<br />
9376 1 each 1 each 2 lbs.<br />
TIPS<br />
TRADE<br />
of the<br />
Choosing the Correct Applicators and Tools<br />
Choosing and using the recommended applicator<br />
or tool is essential to achieving the desired final result.<br />
They will eliminate costly call-backs or repairs from either<br />
too much or too little material being used with an incorrect<br />
applicator. Contact the UZIN Technical Services Department<br />
for additional help with applicator selection.<br />
25
leveling compound APPLICATION tools<br />
UZIN Leveling Compound Rake<br />
22” Leveling Compound Rake with notched insert to apply 1/8” of leveling compound.<br />
Notch size: 3/16” x 5/32” x 1/16”.<br />
Suitable for:<br />
Properties:<br />
• Applying leveling compounds at 1/8” depth<br />
• Heavy duty construction<br />
Item # Package Size Shipping Unit Weight<br />
52298<br />
13396<br />
1 each<br />
10/pkg.<br />
1 each<br />
1 pkg.<br />
2 lbs.<br />
1 lb.<br />
Item #13396 R2 replacement insert<br />
UZIN Gauge Rake<br />
24” Gauge Rake with adjustable sleds for use with leveling compounds.<br />
Suitable for:<br />
Properties:<br />
• Applying and gauging leveling compounds<br />
• Heavy duty construction<br />
• Adjusts from 0”-2.25”<br />
Item # Package Size Shipping Unit Weight<br />
59771 1 each 1 each 2 lbs.<br />
UZIN Spike Roller<br />
29” Spike Roller used during the application of leveling compounds.<br />
Suitable for:<br />
Properties:<br />
• Improving the flow of freshly applied leveling compounds • Strong metal/plastic construction<br />
• Removing air from freshly applied leveling compounds • Easy to clean<br />
Item # Package Size Shipping Unit Weight<br />
13638 1 each 1 each 5 lbs.<br />
UZIN Smoother<br />
22” Smoother for use in applying leveling compounds.<br />
Suitable for:<br />
• Placing and applying leveling compounds<br />
• Relieving surface tension in leveling compounds<br />
Properties:<br />
• Heavy duty construction<br />
• Easy to clean<br />
Item # Package Size Shipping Unit Weight<br />
59361 1 each 1 each 2 lbs.<br />
Threaded Insert for Tools<br />
Threaded pole insert for use with UZIN application tools.<br />
Item # Package Size Shipping Unit Color<br />
67118 1 each 1 each Black<br />
26
ADHESIVE APPLICATION tools<br />
UZIN Foam Roller Coarse<br />
Roller covers designed for the application of UZIN WK 222 Contact Adhesive.<br />
Suitable for:<br />
Properties:<br />
• Applying UZIN WK 222 Contact Adhesive<br />
• 10” size for large areas<br />
• 4” size for small areas, stairs and cove base<br />
Item # Package Size Shipping Unit Color<br />
61983<br />
61984<br />
10” - 5/pkg.<br />
4” - 10/pkg.<br />
1 pkg.<br />
1 pkg.<br />
Yellow<br />
Yellow<br />
US Trowel<br />
U.S. Style B 11 adhesive trowel.<br />
Suitable for:<br />
Properties:<br />
• Applying UZIN wood floor adhesives<br />
• Stainless steel construction<br />
• Installing 3/4” strip, plank; prefinished, unfinished<br />
• Comfort grip handle<br />
or engineered • Notch size: 3/16” x 1/4” x 5/16”<br />
Item # Package Size Shipping Unit Weight<br />
52900 6/pkg. 1 pkg. 1 lb.<br />
Trowel Handles<br />
ErgoStar trowel handles (uses replacement inserts).<br />
Suitable for:<br />
• Applying UZIN wood floor adhesives and MVR’s<br />
Properties:<br />
• Ergonomic handle reduces arm fatigue<br />
• Durable, stainless steel construction<br />
Item # Size Package Size Shipping Unit Weight<br />
41784<br />
41787<br />
8” (21 cm)<br />
11” (28 cm)<br />
10/pkg.<br />
10/pkg.<br />
1 pkg.<br />
1 pkg.<br />
1 lb.<br />
1 lb.<br />
Trowel Inserts<br />
Tempered spring steel replacement inserts for ErgoStar trowel handles.<br />
Suitable for:<br />
• Applying UZIN wood floor adhesives and MVR’s<br />
B2 Trowel Notch<br />
3/32”x3/32”x3/32”<br />
B3 Trowel Notch<br />
1/8” x 1/8” x 1/8”<br />
B11 Trowel Notch<br />
3/16” x 3/16” x 5/16”<br />
Item # Size Application Package Size Shipping Unit<br />
13371<br />
13386<br />
B2, 8” (21 cm)<br />
B2, 11” (28 cm)<br />
All 2-component epoxy moisture vapor<br />
retarders<br />
10/pkg.<br />
10/pkg.<br />
1 pkg.<br />
1 pkg.<br />
13372<br />
13387<br />
B3, 8” (21 cm)<br />
B3, 11” (28 cm)<br />
Mosaics/parquet or smooth back engineered<br />
and underlayment<br />
10/pkg.<br />
10/pkg.<br />
1 pkg.<br />
1 pkg.<br />
13380<br />
13399<br />
B11, 8” (21 cm)<br />
B11, 11” (28 cm)<br />
3/4” strip or plank up to 7”; prefinished,<br />
unfinished or engineered with relief back<br />
10/pkg.<br />
10/pkg.<br />
1 pkg.<br />
1 pkg.<br />
27
Our Responsibility to the Environment and to Your Health<br />
Our commitment to health and the environment is not an afterthought... it’s a key objective in our product<br />
development process. As you can see on the following page, we submit our products to some of the most<br />
rigorous health and environmental testing on the planet. In every case our products not only meet but exceed<br />
these demanding requirements. It’s just one more way that you can count on our promise.<br />
28
LEED®<br />
contributing<br />
product<br />
LEED ® Contributing Product<br />
This icon has been created by us to recognize those products in our range that qualify for LEED ® points. LEED ® or<br />
“Leadership in Energy & Environmental Design” is a program developed by the U.S. Green Building Council that provides<br />
third-party verification of buildings in order to satisfy certain environmental prerequisites and earn points to achieve different<br />
levels of certification. For more information see www.usgbc.org/leed.<br />
What it means to the planet<br />
Products and programs help to conserve energy, water and other resources.<br />
What it means for humans<br />
Products and programs help to create healthier and safer environments for occupants.<br />
ÖKOLINE<br />
UZIN’s environmentally friendly Ökoline range of products meet the stringent 3rd party testing requirements of GEV<br />
Emicode and Blue Angel for environmental safety and indoor air quality without sacrificing product effectiveness.<br />
What it means to the planet<br />
All Ökoline products are solvent-free and low-emitting which means they do not release<br />
damaging volatile organic compounds into the environment.<br />
What it means for humans<br />
Because the Ökoline range recognizes and meets both GEV Emicode and Blue Angel requirements,<br />
they help to maintain healthy indoor environments for consumers.<br />
GEV-Emicode ®<br />
GEV represents the German acronym for the Association for the Control of Emissions in Products for Flooring Installation,<br />
Adhesives and Building Materials or Gemeinschaft Emissionskontrollierte Verlegewerkstoffe (see www.emicode.com).<br />
Emicode ® is GEV’s trademark-protected name for their stringent testing and labeling system that categorizes products into<br />
3 emission classes:<br />
EMICODE EC 1 R PLUS = very low emission, regulated • EMICODE EC 1 PLUS = very low emission • EMICODE EC 1 = low emission<br />
What it means to the planet<br />
Although its mandate is primarily for the assurance of indoor air quality, by their very nature, these products are<br />
extremely low-emitting so also do not contribute to greenhouse gas accumulation.<br />
What it means to humans<br />
GEV’s extremely stringent standards are recognized internationally as the highest level of indoor air quality protection.<br />
The Blue Angel<br />
The Blue Angel was the first environment-related label for products and services in the world. Since 1978 it has set the<br />
standard for eco-friendly products and services determined by an independent jury and by defined testing criteria.The Blue<br />
Angel is only awarded to products and services which are of considerable benefit to the environment and, at the same time,<br />
meet high standards of effectiveness, health and occupational protection (see www.blauer-engel.de/en/).<br />
What it means to the planet<br />
Products are solvent-free and low in emissions and do not produce harmful ozone-depleting greenhouse gasses.<br />
What it means to humans<br />
Extremely low VOC’s, odors and preservatives which do not affect human health.<br />
UZIN. YOUR FLOOR. OUR PROMISE.<br />
29
Contact Information<br />
About UFLOOR Systems Inc.<br />
UFLOOR Systems Inc. (Aurora, CO USA) is the North American subsidiary<br />
of Uzin-Utz AG, Ulm, Germany. The company was founded in 1911 and is<br />
a vertically integrated manufacturer of product systems designed for the<br />
preparation, installation, finishing and care of all types of floor coverings.<br />
UFLOOR Systems offers its products under the UZIN, Pallmann and Wolff<br />
brand names.<br />
Contact Information<br />
Customer Service / Orders<br />
P : 720.374.4810<br />
F : 720.374.2113<br />
Email: info@ufloorsystems.com<br />
Technical Customer Service<br />
P : 720.374.4810<br />
F : 720.374.2113<br />
Email: tech@uzin.us<br />
UFLOOR Systems Inc.<br />
14509 E. 33rd Place, Unit G, Aurora, CO 80011<br />
P : 866.505.4810<br />
www.ufloorsystems.com<br />
www.uzin.us<br />
Gensler Architects’ Washington, D.C. offices | UZIN PE 480, UZIN NC 170, UZIN NC 172, UZIN NC 888, UZIN RR 201, UZIN RR 203<br />
Contractor: Mid-Atlantic Flooring, Sterling, VA<br />
30
UZIN. YOUR FLOOR. OUR PROMISE.<br />
31
UZIN | A Brand of UFLOOR Systems Inc.<br />
UFLOOR Systems Inc. | 14509 E. 33rd Place, Unit G | Aurora, CO 80011<br />
Phone: 720.374.4810 | Fax: 720.374.2113<br />
info@ufloorsystems.com | www.ufloorsystems.com | www.uzin.us<br />
09/14<br />
32<br />
UZIN. YOUR FLOOR. OUR PROMISE.