LC7.1E - Super TV Servis M+S

More documents

Recommendations

Info

EN 10 4. <strong>LC7.1E</strong> PA Mechanical Instructions 4.3.7 Power Supply Board The PSU belongs to the PDP panel. Please refer to the PDP repair manual for more info (info on front page). 4.3.8 Small Signal Board [B] 1 1. Unplug all connectors. Carefully unplug the LVDS connector as it is very fragile. 2. Remove the T10 tapping screws [1]. 3. Remove the T10 parker screws [2]. 4. Take out the panel. 2 H_16960_012.eps 060407 Figure 4-12 PDP panel [1/3] 1 H_16960_010.eps 030407 Figure 4-10 Small Signal Board -1- 1 1 2 2 H_17000_009.eps 260207 Figure 4-13 PDP panel [2/3] H_16960_011.eps 030407 Figure 4-11 Small Signal Board -2- 4.3.9 PDP Panel 1. Refer to next figures. 2. Remove the bottom “speaker cover”, as earlier described. 3. Unplug mains cable from PDP Power Supply Unit [1]. 4. Unplug all connectors to/from the panels inside the “SSB tray”. Pay attention to the LVDS connector. 5. Remove screws [2], and remove the metal “SSB tray” (incl. panels) from the set. 6. You now view the PDP boards, as shown in fig. “PDP panel [2/3]“. 7. Remove fixation screws [3] and lift the complete PDP (incl. the boards and wiring) by means of the mounting brackets [4] from the set. Note: Remove these brackets [4] before returning the defective PDP. 4 Figure 4-14 PDP panel [3/3] 3 4 H_17000_015.eps 280207
Mechanical Instructions <strong>LC7.1E</strong> PA 4. EN 11 4.3.10 Glass Plate 1. Refer to figures “Glass plate“ below. 2. Remove T10 Parker screws [1] along the side of the glass plate, and remove the metal fixation brackets. 3. Lift the glass plate form the set. 1 H_17000_016.eps 280207 Figure 4-15 Glass plate 4.4 Set Re-assembly To re-assemble the whole set, execute all processes in reverse order. Notes: • While re-assembling, make sure that all cables are placed and connected in their original position. See figure "Cable dressing". • Pay special attention not to damage the EMC foams. Ensure that EMC foams are mounted correctly.
Page 1 and 2: Colour Television Chassis LC7.1E PA
Page 3 and 4: Technical Specifications, Connectio
Page 5 and 6: Safety Instructions, Warnings, and
Page 7 and 8: Mechanical Instructions LC7.1E PA 4
Page 9: Mechanical Instructions LC7.1E PA 4
Page 13 and 14: Service Modes, Error Codes, and Fau
Page 23 and 24: Block Diagrams, Test Point Overview
Page 29 and 30: I²C Block Diagrams, Test Point Ove
Page 31 and 32: 7. Circuit Diagrams and PWB Layouts
Page 33 and 34: Circuit Diagrams and PWB Layouts LC
Page 39 and 40: 1 3 Circuit Diagrams and PWB Layout
Page 47 and 48: Circuit Diagrams and PWB Layouts 47
Page 49 and 50: Layout Small Signal Board (Part 1 T
Page 51 and 52: Layout Small Signal Board (Part 3 T
Page 61 and 62:
Layout Keyboard Control Panel (Top
Page 63 and 64:
Circuit Diagrams and PWB Layouts LC
Page 65 and 66:
Alignments LC7.1E PA 8. EN 65 8. Al
Page 67 and 68:
Alignments LC7.1E PA 8. EN 67 Optio
Page 69 and 70:
Circuit Descriptions, Abbreviation
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
9.10 IC Data Sheets Circuit Descrip
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Spare Parts List LC7.1E PA 10. EN 8
Page 85 and 86:
Spare Parts List LC7.1E PA 10. EN 8
show all

LC7.1E - Super TV Servis M+S

Create successful ePaper yourself

Delete template?

Save as template?