Plasma Television - Super TV Servis M+S
Plasma Television - Super TV Servis M+S
Plasma Television - Super TV Servis M+S
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TH-37PV60E / TH-37PX60B / TH-42PV60E / TH-42PX60B<br />
11.4. ABL adjustment<br />
Instrument Name Connection Remarks<br />
1. HD signal emitter (or Leader : 1080i/No.9 signal) COMPONENT input terminal<br />
2. Wattmeter<br />
Connect the AC power of the set to the<br />
wattmeter.<br />
Procedure<br />
·Make sure the set is aged for 30 minutes or more before adjustment.<br />
(Do not switch off during or after aging.)<br />
·Voltage 230V 50Hz (variation within 1%)<br />
·Volume at minimum and screen size at “16:9”<br />
Component input, dynamic, standard<br />
Remarks<br />
1. Connect the set´s AC power to the wattmeter.<br />
2. Input the signal (top half: color bar, Bottom half :Horizontal 10steps bar).<br />
3. Select the “PWRCTL” item in the Service1.<br />
4. Adjust PWRCTL so the set´s power consumption is<br />
TH-37PV60E 271 ±10W<br />
TH-37PX60B 280 ±10W<br />
TH-42PV60E 331 ±10W<br />
TH-42PX60B 340 ±10W<br />
Remarks<br />
1. The initial data are<br />
0×00 for 37/42SD (A0-0102)<br />
2. The power and data are in reverse relationship.<br />
(Lower the data to raise the power.)<br />
<br />
·Raising direction ():201F<br />
·Lowering direction ():201A<br />
3. There is a possibility that the adjustment value can do two places, adjust it in that case, that<br />
the value of PWRCTL is large.<br />
41