You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5-3. V-LINEARITY<br />
- Push the V.L key of the service remocon, and the cursor indicate V.L (Fig 2).<br />
- Adjust to use DATA UP/DOW N key so that the Retma Pattern is the most complete circle.<br />
5-4. H-CENTER<br />
- Push the H.P(P) key of the service remocon, and the cursor indicate H.P(P) (Fig 2).<br />
- Adjust to use DATA UP/DOWN key so that the Width number at the edge of left/ right side may be seen the same.<br />
6. Pincusion Adjustment<br />
- Receive the CROSS-HATCH signal.<br />
- Turn E/W VR(R401) of the main PCB so that the second vertical line of the left side may be straightened. (like Fig.4)<br />
(SECOND VERTICAL LINE)<br />
<br />
7. Width Adjustment<br />
- Receive the Retma signal (for PAL system)<br />
- Turn VR(R402) of the main PCB so that the Width number “11” may be seen at the edge of left and right side.<br />
(like Fig.3)